|
Mayflower 3/4" x 3-1/4" Millrun Hickory |
|
|
|
|
Hickory greatly separates itself from other wood species by its great color variation which begins from light tan to reddish/ dark brown tones with dramatic grain patterns. What is "Millrun Grade?"
|
Please click here to download Adobe Reader. |
REVIEW SNAPSHOT®
by PowerReviews(based on 3 reviews)
Ratings Distribution
100%
of respondents would recommend this to a friend.
Pros
Cons
Best Uses
Reviewed by 3 customers
Sort by
Displaying reviews 1-3
Pros
Cons
Best Uses
The worst part about this product is the 3 1/4" end of the tongue side or short side had random pieces that were out of square. These boards were hard to discover until after it was installed. Some of the tongues were not cut well and were too thick. I also had issue with several boxes that were primarily 12" to 14" in length. The look of the floor is great but you have to be careful while installing not to put down a piece that is out of square.
Pros
Cons
Best Uses
there was a good selection of colors and figure throughout the boxes. The pieces fit together perfectly with no differences in width.The finish was even and smooth.
Pros
Cons
Best Uses
I used this on the main level of my home. We have a lot of traffic so durability was important. The variation in color is beautiful. I was concerned that there may be a lot of waste bc it was mill run(not best quality). I had very little waste. I have 9 boxes left and I went with less than they estimated.
Displaying reviews 1-3
Do you have questions about this product?
AnswerBox - Get answers from Staff Experts and real customers by clicking "Ask a question"
or click here to ask our Customer Service Team
Q:
Can the 3/4" x 3 1/4" Hickory Millrun be used to finish a vaulted ceiling?1 answer
A:
For helpful tips & instructions; Please go to our http://www.lumberliquidators.com//brands/brands.jsp?brandName=WallsCeilings,Q:
Can this floor be used with a heated floor system.1 answer
A:
Lumber Liquidators recommends floating floors -flooring not attached to the subfloor- for radiant heat applications. To ensure performance, the consumer should be aware of risks associated with nailing or gluing solid wood over radiant heat and ensure product selection and installation practices are appropriate for the application. If you choose to use solid wood, select quarter-sawn or rift-sawn materials. Note that even using solid wood species with known positive dimensional *stability characteristics than others, cannot predictably be guaranteed to perform well in every application. In addition, radiant systems if not monitored and controlled properly can negatively impact the long term finish performance of wood flooring and may result in finish chipping, peeling or hazy finish.Q:
Can this product be floated over a concrete slab1 answer
CUSTOMER CARE
A:
Yes but only if you use Elastilon as your installation system. Otherwise a plywood subfloor base would would need to be installed.Q:
What kind of underlayment is recommended for a normal subfloor (versus concrete)?1 answer
CUSTOMER CARE
A:
Subfloor needs to be 3/4" plywood, PS2 rated OSB (Oriented strand board), Sturdi-Floor, or other approved hardwood flooring subfloor for naildown installation. 15lb felt paper or White Silicone paper should be used if over a basement or crawl space. For 2nd floor or higher only red rosing paper to aid installation. Insulating underlayment like Eco Sound or Bellawood Supreme may be used for naildowns.Q:
what sort of warranty does this particular product carry1 answer
A:
You can find complete warranty information on our website through the Flooring 101 web pages Browse Categories, HARDWOOD COLLECTION, warranty. Thank you for writing in.Q:
I just had this installed, what should I use to clean this product?1 answer
A:
We can only recommend our Bellawood Floor Cleaner, or cleaners that are safe for water based urethane finishes. Never use any polish, wax, oil soaps or cleaners that add shine to the floor. In addition, we do not recommend using steamers or wet-jet cleaning systems for hardwood because spraying can collect moisture in between board edges. The use of these products is at your own risk.Q:
what finish does it have and what type bevel on how many sides.2 answers
A:
Mayflower finishA:
Thank you for your inquiry.Q:
Where does this material come from?1 answer
A:
Millrun Hickory Solid Hardwood Flooring is a domestic species harvested, milled & finished in the USA.
 | ||||
| ||||
