Swatch Shadow
1-800-HARDWOOD (1-800-427-3966)
Shopping Cart
Email Deals | Weekly Sale | Request a catalog | Find a store
3/4" x 3-1/8" x 6.5LFT Cumaru Stair Nose

3/4" x 3-1/8" x 6.5LFT Cumaru Stair Nose

3/4" x 3-1/8" x 6.5LFT Cumaru Stair Nose
Customer Rating

6.5 linear ft. each
SKU: 10004686
Comparable Price $11.39/linear ft.
Our Low Price $9.96/linear ft.
Your
Linear
Feet:



Check Measurement
Your Material Cost:


PRBTSN3 - 3/4" x 3 1/8" x 6.5LFT Cumaru Stair Nose Prefinished

Stair Nosing is used around steps, stair landing trims, and to elevate floor perimeters

REVIEW SNAPSHOT®

by PowerReviews
3/4" x 3-1/8" x 6.5LFT Brazilian Teak Stair Nose
 
3.7

(based on 14 reviews)

Ratings Distribution

  • 5 Stars

     

    (4)

  • 4 Stars

     

    (5)

  • 3 Stars

     

    (3)

  • 2 Stars

     

    (1)

  • 1 Stars

     

    (1)

92%

of respondents would recommend this to a friend.

Pros

  • Improves look (9)
  • Easy to install (5)
  • Easy to use (4)
  • Protects wood (3)

Cons

  • Difficult to install (5)

Best Uses

  • Hardwood floors (9)
  • Home (4)
    • Reviewer Profile:
    • Avid do-it-yourselfer (5), Professional (5)

Reviewed by 14 customers

Sort by

Displaying reviews 1-10

Back to top

Previous | Next »

 
3.0

different dimension than flooring

By Senior Citizen

from Gaithersburg, Md

About Me Avid Do-It-Yourselfer

Verified Reviewer

Pros

    Cons

    • Difficult To Install

    Best Uses

      Comments about 3/4" x 3-1/8" x 6.5LFT Brazilian Teak Stair Nose:

      The bullnose is about 3/64th of an inch thinner than the flooring planks which means the bullnose has to be shimmed which was a pain when doing hardwood stairs. Additionally the groove of the bullnose is slightly offset from the tongue of the planking yeilding an uneven floor surface between the two of a 32th of an inch unless the groove is enlarged. These factors significantly increased the time and effort of putting in a set of stairs.

       
      3.0

      The package had the wrong stair nose had

      By prettybobbels

      from Westland, MI

      About Me Beginner

      Pros

      • Improves Look

      Cons

        Best Uses

        • Hardwood Floors

        Comments about 3/4" x 3-1/8" x 6.5LFT Brazilian Teak Stair Nose:

        after returning the product for the correct piece it looks great

         
        1.0

        TOO MUCH GLOSS DOESN"T LOOK GOOD

        By dtm409

        from montgomery, NY

        About Me Avid Do-It-Yourselfer

        Verified Reviewer

        Pros

          Cons

          • Difficult To Install

          Best Uses

            Comments about 3/4" x 3-1/8" x 6.5LFT Brazilian Teak Stair Nose:

            I was told it would match the cumaru flooring I bought and hte wood was ok but the high gloss finish did not match my floor.

             
            4.0

            Brazilian Teak Stair Nose

            By jondorock

            from Reynoldsburg, OH

            About Me Professional

            Verified Reviewer

            Pros

            • Easy To Install
            • Easy To Use
            • Improves Look

            Cons

            • Could use more overhang
            • Nose seemed a bit short

            Best Uses

            • Hardwood Floors

            Comments about 3/4" x 3-1/8" x 6.5LFT Brazilian Teak Stair Nose:

            glad this prefinished stair nose was available but the nose portion seemed a little short to me.

            (1 of 1 customers found this review helpful)

             
            3.0

            Braz Teak nosing

            By Dave F.

            from Plymouth, MI

            About Me Avid Do-It-Yourselfer

            Pros

            • Improves Look

            Cons

            • Finish

            Best Uses

            • Home

            Comments about 3/4" x 3-1/8" x 6.5LFT Brazilian Teak Stair Nose:

            The finish of the nosing is orange-peely and does not match the high-quality finish of the Bellawood Braz Teak flooring. This is dissapointing.

            (2 of 2 customers found this review helpful)

             
            2.0

            Brazilian Teak Bullnose

            By benny

            from mpls, mn

            About Me Professional

            Verified Buyer

            Pros

              Cons

              • Difficult To Install

              Best Uses

              • Hardwood Floors

              Comments about 3/4" x 3-1/8" x 6.5LFT Brazilian Teak Stair Nose:

              My installer said that this bull nose was milled incorrectly. It is not level where the wood meets the bull nose. The installer is very experienced and shimmed what he could. The product was not good quality....

              (0 of 1 customers found this review helpful)

               
              5.0

              Love this floor

              By Jody

              from Signal Mountain, TN

              About Me Avid Do-It-Yourselfer

              Verified Buyer

              Pros

              • Easy To Install
              • Easy To Use
              • Improves Look
              • Protects Wood

              Cons

              • none

              Best Uses

              • Hardwood Floors

              Comments about 3/4" x 3-1/8" x 6.5LFT Brazilian Teak Stair Nose:

              I love this floor so much that I put in my master bedroom and are planning to put in my 2 other bedrooms

              (1 of 1 customers found this review helpful)

               
              4.0

              Brazilian Teak Stair Nose not 3/4" thick

              By Vector

              from Long Island, NY

              About Me Professional

              Verified Buyer

              Pros

              • Easy To Install
              • Easy To Use
              • Improves Look
              • Protects Wood
              • Reduces Noise

              Cons

              • Not to spec

              Best Uses

                Comments about 3/4" x 3-1/8" x 6.5LFT Brazilian Teak Stair Nose:

                I use my remainder LL 3/4" Brazilian Teak hardwood to build the stair with the stair nose. The LL Brazilian Teak stair nose is 1/16" thinner than the LL 3/4" Brazilian Teak hardwood plank. It shouldn't be because the stair nose and the hardwood should both be 3/4" thick as per spec. It still looks good but when you step on it, you feel the stair nose is thinner.

                 
                5.0

                Everything I expected and MORE!

                By Damian C

                from Garnet Valley, PA

                About Me Avid Do-It-Yourselfer

                Verified Buyer

                Pros

                • Easy To Install
                • Easy To Use
                • Improves Look
                • Reduces Noise

                Cons

                  Best Uses

                  • Hardwood Floors
                  • Home

                  Comments about 3/4" x 3-1/8" x 6.5LFT Brazilian Teak Stair Nose:

                  Nothing bad to say about the nosing. Very beautiful and installs very stable. I wish the stair treads also had the overhang lip.

                   
                  5.0

                  WOW!!! WHAT A GREAT PRODUCT.

                  By FRED HAPPY CUSTOMER

                  from COLUMBUS OHIO

                  Verified Buyer

                  Pros

                  • Good Value
                  • High Quality

                  Cons

                    Best Uses

                      Comments about 3/4" x 3-1/8" x 6.5LFT Brazilian Teak Stair Nose:

                      THE QUALITY AND THE VALUE WAS FAR BETTER THAN ANYONE ELSE COULD OFFER ME. EVEN MY INSTALLER WAS SURPRISED AT THE VALUE.

                      Displaying reviews 1-10

                      Back to top

                      Previous | Next »


                      Do you have questions about this product?

                      AnswerBox - Get answers from Staff Experts and real customers by clicking "Ask a question"

                      or click here to ask our Customer Service Team

                      8 Questions | 8 Answers
                      Displaying questions 1-8
                      • Q:

                        What do would you recommend on refinishing this product? We have areas that color is worn. Would a heavier urethane help prevent this?
                        Asked on 2/19/2012 by Anonymous from Southlake, tx

                        1 answer

                        • Staff Reviewer

                          A:

                          I would recommend having this handscraped, stained flooring product done by an experienced professional finisher.
                          A screen and recoat involves lightly abrading the top surface of the finish with a screen or a pad and abrasive strip, then applying another topcoat. Clean the floor in accordance with the finish manufacturer’s recommendations. Lightly abrade the old finish according to finish manufacturers’ recommendation. Vacuum and tack floor with proper solvent, depending on finish, and allow to dry thoroughly. Apply surface finish. Most surface finished floors can be walked on after 24-48 hours. Do not slide furniture on the floor. Lift it into place after 48 hours or as recommended by the finish manufacturer. Area rugs can be put down after the finish is fully cured, generally after 7 to 30 days, or as recommended by the finish manufacturer. If the floor has visible dents, wear patterns or permanent cupping, recoating is not a viable
                          solution, and it will be necessary to fully sand the floor to restore the finish if the flooring is capable of being fully sanded. Finish adhesion is affected by surface contaminants, i.e. wax, grease and many other maintenance products. One brand or type of finish may not be compatible with another. Always test in several areas in accordance with finish manufacturer’s recommendations to be sure the finish will adhere and dry properly. A good place for testing is in a closet. To reduce claims and problems that may occur, a screen and recoat or full sanding is best if done by a professional sand and finish expert. NWFA Sand and Finish Guidelines

                          Answered on 3/12/2012 by customer care 2
                      • Q:

                        Can I glue this product directly to concrete, or do I have to put down plywood then nail it?
                        Asked on 2/11/2012 by Anonymous

                        1 answer

                        • Staff Reviewer

                          A:

                          Yes it can. With proper installation and care this flooring will last for years in this application. You can find complete care and installation instructions on the product page by clicking on the specs tab and then clicking on - Installation Guide.pdf Thank you for your question.

                          Answered on 3/8/2012 by customer care 2
                      • Q:

                        Is this product recommended for use on stairs?
                        Asked on 2/4/2012 by Anonymous

                        1 answer

                        • CUSTOMER CARE

                          A:

                          Generally tongue and groove flooring can be installed on stairs, however we have no matching stair nose for this floor.

                          Answered on 2/8/2012 by Tech & Install
                      • Q:

                        I just ordered this product and I am going to install myself how long to do I need let it climatize in the house before I start install?
                        Asked on 1/2/2012 by Anonymous

                        1 answer

                        • Staff Reviewer

                          A:

                          Thank you for your purchase.
                          All wood products are affected by environmental conditions, especially prefinished materials.
                          To control wood movement- expansion or shrinkage- it is recommended to acclimate the new flooring in the areas to be installed, not in (garages, U-Haul trailers, sheds, or tents) to normal lived-in conditions while in the boxes. If the products are protected in plastic then open the ends of the boxes. Length of time is not the determining factor. The goal of acclimation is for the core of the product to reach an equilibrium or moisture balance of the new flooring with its surroundings before installation or fastening. This balance could be achieved in as little as 1 to 5 days, or longer for some dense or oily exotic species.

                          Avoid shocking the floor.

                          Just like you, wood actually performs best with consistent indoor temperatures of 60°-80° F and indoor humidity levels of 30% - 50%. Very dry or humid regions of the country usually require extended conditioning. Maintaining the recommended acclimation levels even after the installation should be viewed as ongoing floor care. Your doing so will help to minimize board movement, excessive squeaks, finish cracking and gaps.
                          You can find complete installation instructions on the product page by clicking on the specs tab and then clicking on - Installation Guide.pdf
                          Thank you for your question.




                          Hygrometers sold in most Target and Wal-Mart stores ($10-$45) can be used to easily identify the need to regulate the humidity or air moisture.




                          In addition, to prevent board warping or bowing, do not cut the plastic support bindings on the outside of the packaging until ready to install. Store products flat, in a dry place. Provide air flow under and around cartons. Do not store directly on bare concrete or next to outside walls. Cartons should be placed as close to the center of the installation area as possible.




                          Proper jobsite conditions, acclimation and moisture testing of the subfloor along with the new flooring all works together for the success of the installation and is the responsibility of those overseeing the project.

                          Answered on 1/5/2012 by customer care 2
                      • Q:

                        can this flooring handle the weight of kitchen cabinets and granite countertops?
                        Asked on 12/29/2011 by anon from texas

                        1 answer

                        • Staff Reviewer

                          A:

                          Yes this solid oak can "handle' the weight but keep in mind that any natural product will exand and contract and the flooring would be locked in place with this application.
                          If possible install cabinets first and install up to them leaving the proper expansion gap.
                          You can find complete installation instructions on the product page by clicking on the specs tab and then clicking on - Installation Guide.pdf
                          Thank you for your question.

                          Answered on 1/7/2012 by customer care 2
                      • Q:

                        How heavy is each box of the 5" planks?
                        Asked on 12/26/2011 by Anonymous

                        1 answer

                        • Staff Reviewer

                          A:

                          Each box weighs 62 lbs.
                          Thank you for your question.

                          Answered on 1/9/2012 by customer care 2
                      • Q:

                        is this a pretty sturdy floor that can handle high traffic of a salon and spa?
                        Asked on 11/28/2011 by Anonymous

                        1 answer

                        • Staff Reviewer

                          A:

                          Yes this solid wood flooring can be used for this application.
                          Despite today's advanced technology, water spills, dirt and other abrasive substances can damage a wood floor's finish. Location, traffic patterns, how often the floor is vacuumed and cleaned, children and/or pets are all factors that influence wear and durability.
                          Thank you for your inquiry.

                          Answered on 11/29/2011 by customer care 2
                      • Q:

                        If I needed to get another 200 sq ft of this product is it available?
                        Asked on 6/18/2010 by Jeremy from Phoenix, AZ

                        1 answer

                        • Staff Reviewer

                          A:

                          For price and product availability please contact our Customer Care or Sales departments at 1-800-366-4204.

                          Answered on 7/29/2010 by Customer Care1
                      Displaying questions 1-8

                      Do you have a question about this product? 


                      * indicates required fields  
                      Your Info » * Your Name:
                      * Email Address:
                      Your Friend's Info » * Friend's Name:
                      * Email Address:
                      Your Message » Your Message:
                        No need to include a link to this page, we'll do that.
                        Send Email


                      back to top