Brazilian Cherry Laminate End Cap

Customer Rating

7.5 linear ft. each SKU: 10011093 Comparable Price ~~$3.49/linear ft.~~ Our Low Price $3.29/linear ft. Save up to $0.20/linear ft. (6%)
Your Linear Feet: Check Measurement	Your Material Cost:

Brazilian Cherry Laminate End Cap

What are End Caps used for?
End Caps are used to transition from the wood floor to a higher surface such as: Doors, thick tile, and raised hearth.

Not sure if this is the right product?
Call 1-800-HARDWOOD to speak to one of our flooring experts.
We will be glad to help you!

REVIEW SNAPSHOT®

by PowerReviews

Brazilian Cherry Laminate End Cap

4.0

(based on 2 reviews)

Reviewed by 2 customers

Sort by

Displaying reviews 1-2

12/22/2011

(1 of 1 customers found this review helpful)

4.0

Beautiful floor, great price

By KRob

from Raleigh, NC

About Me Avid Do-It-Yourselfer

Pros

Improves Look

Cons

Difficult To Install

Best Uses

Laminate Floors

Comments about Brazilian Cherry Laminate End Cap:

We redid our entire main floor with this laminate. Has a great "real wood" look with excellent durability (we dropped giant screw drivers on samples before purchasing and no marks were made). Our friend who installs floor professionally said that it's a pain to install compared to real hardwoods. But, he did it and it looks great!

5/6/2010

(0 of 3 customers found this review helpful)

4.0

laminate end tap

By Gloria

from Greenville SC

Comments about Brazilian Cherry Laminate End Cap:

I purchased over [$] of product not just the end taps

Displaying reviews 1-2

Do you have questions about this product?

AnswerBox - Get answers from Staff Experts and real customers by clicking "Ask a question"

or click here to ask our Customer Service Team

8 Questions | 7 Answers

Displaying questions 1-8

Q:
what do I need to do if i spill a drink on the floor?
What to do if a spill stays on the floor for more than a few min.?
Asked on 6/30/2011 by Gene from El Paso
Know the answer? Answer this question
1 answer
- A:
  Clean it up with a clean (slightly damp) cloth and buff dry.
  Thank you for writing in.
  Answered on 7/1/2011 by customer care 2
Q:
How would you suggest to clean this type of flooring? Can you use a steam floor cleaner on it?
Asked on 1/10/2011 by Happy Home Owner from Spring Lake, MI
Know the answer? Answer this question
1 answer
- A:
  We do not recommend steam mops on our laminates or on any of our floors. Although steam mops are appropriate for kitchen sheet vinyl or ceramic tiles. Wood, laminate and cork floorings have raw seam edges that can swell or cup after steam cleaning. We recommend our Bellawood Floor Cleaner, or cleaners that are safe for water based urethane finishes.
  Answered on 3/8/2011 by customer care 2
Q:
How deep is the wear layer on this floor. Can it be sanded?
Asked on 12/16/2010 by Vanessa from NY
Know the answer? Answer this question
1 answer
- A:
  The Virginia Mill Works 3/8" x 5" Sculpted Ash Engineered flooring has a 2mm wear layer.
  This can be screened and recoated by a pro finisher.
  Answered on 12/27/2010 by customer care 2
Q:
How thick is the wear layer on this product?
Asked on 12/14/2010 by Vanessa from NY
Know the answer? Answer this question
0 answers
Q:
Is this LOW VOC?
Asked on 10/20/2010 by DJ from Austin, TX
Know the answer? Answer this question
1 answer
- A:
  Yes.
  For complete MSDS information; please go to our website and at the bottom of the main page click on Flooring 101, enter search for Va Millworks engineered wood MSDS , then click on the PDF.
  Answered on 10/21/2010 by customer care 2
Q:
What about steps? How much will you need and can you apply it>
Asked on 10/7/2010 by erie from Rancho Santa Margarita, CA
Know the answer? Answer this question
1 answer
- A:
  Please call our Tech and Install Department @ (800) 366-4204 for a detailed response to this question.
  Answered on 10/8/2010 by customer care 2
Q:
Can this material be used in a bathroom?
Asked on 9/16/2010 by Anonymous from jericho, ny
Know the answer? Answer this question
1 answer
- A:
  This product would be ok for use in ½ bathrooms. However due to high humidity, Lumber Liquidators recommends against wood products in full bathrooms.
  Answered on 9/17/2010 by customer care 2
Q:
I will be installing over a concrete slab and I am wondering if I should glue it down or use the floating type. Also, should I use padding or a vapor barrier with either style of installation?
Asked on 8/8/2010 by Max the Handyman from Mississippi
Know the answer? Answer this question
1 answer
- A:
  Either installation will work well. If you float the floor you should use a 6mil poly for your moisture barrier and a cushion such as Quiet Walk or Insulayment. If you choose to glue it down you would use a trowel on moisture barrier from the same manufacturer as the adhesive.
  Answered on 8/11/2010 by customer care

Displaying questions 1-8

Do you have a question about this product?

* indicates required fields
Your Info »	* Your Name:
Your Info »	* Email Address:
Your Friend's Info »	* Friend's Name:
Your Friend's Info »	* Email Address:
Your Message »	Your Message:
	No need to include a link to this page, we'll do that.
		Close Window