Casa de Colour  3/4" x 3-1/2" Espresso Taun

A:

The Botanical Name: Pometia Pinnata is the species of tree.
Taun is a moderately durable hardwood timber with a range of applications including general building framework, flooring and cladding, joinery and cabinetwork, as well as cooperage, outdoor furniture, boat building, plywood and veneers.

A:

All wood products are affected by environmental conditions, especially prefinished materials.
To control wood movement- expansion or shrinkage- it is recommended to acclimate the new flooring in the areas to be installed, not in (garages, U-Haul trailers, sheds, or tents) to normal lived-in conditions while in the boxes. If the products are protected in plastic then open the ends of the boxes. Length of time is not the determining factor. The goal of acclimation is for the core of the product to reach an equilibrium or moisture balance of the new flooring with its surroundings before installation or fastening. This balance could be achieved in as little as 1 to 5 days, or longer for some dense or oily exotic species.

Avoid shocking the floor.
Just like you, wood actually performs best with consistent indoor temperatures of 60°-80° F and indoor humidity levels of 30% - 50%. Very dry or humid regions of the country usually require extended conditioning. Maintaining the recommended acclimation levels even after the installation should be viewed as ongoing floor care. Your doing so will help to minimize board movement, excessive squeaks, finish cracking and gaps.

Hygrometers sold in most Target and Wal-Mart stores ($10-$45) can be used to easily identify the need to regulate the humidity or air moisture.
In addition, to prevent board warping or bowing, do not cut the plastic support bindings on the outside of the packaging until ready to install. Store products flat, in a dry place. Provide air flow under and around cartons. Do not store directly on bare concrete or next to outside walls. Cartons should be placed as close to the center of the installation area as possible.

Proper jobsite conditions, acclimation and moisture testing of the subfloor along with the new flooring all works together for the success of the installation and is the responsibility of those overseeing the project.

A vapor barrier is needed to protect the new flooring against moisture or moisture vapor.

A:

This is a product of China.
Thank you for writing in.

A:

This is a solid 3/4" product designed to be nailed to a wood substrate.
But can be installed over concrete using our Elastilon underlayment.
What you should know about Elastilon Strong
An Elastilon-backed wood floor is much faster to install than traditional nail or glue-down methods.
Elastilon Strong can be installed on new concrete floors, handling up to 3.9% moisture content. A vapour barrier of at least 6 mil PE should be used below grade and on newly poured concrete above grade where the moisture content is above 3.9%.
Laid down with a 5/8” (15 mm) expansion gap, Elastilon Strong creates a dynamic, floating floor that expands or contracts naturally with the hardwood.
Elastilon Strong has no odor and is free of volatile materials.
Elastilon Strong gives cushioned comfort.
1/8” (3 mm) thick Elastilon Strong has ratings of IIC 62 and STC 54.
Thermal resistance: R _ 0,15 (m K) / W
Elastilon Strong carries a 70-year limited warranty. Thank you for your inquiry.

A:

This wood species is Taun and has a Janka rating of 1576 .
Oak is at 1290.
Thank you for writing in.

A:

Generally no. Floating engineered and some laminate flooring may be but the radiant heat manufacturer should be consulted as to which floor coverings are recommended.

A:

Our focus at Lumber Liquidators is to provide you with fantastic flooring at low prices! Although Lumber Liquidators does not have measure people or our own in-house installers we make planning your installation easy and it can be arranged in several convenient ways.
The Lumber Liquidators Installation Service is managed by The Home Service Store® (HSS®). To schedule an installation please call HSS @ 1-877-477-1116, visit your local Lumber Liquidators or go to our Website @ LumberLiquidators.com and click on; Installation from $1.99. Thank you for your inquiry.