Tranquility  5mm Magnolia Springs Hickory Click Resilient Vinyl

A:

MAINTENANCE (Dos and DONTs)
DO
• Sweep or vacuum regularly. • Use cleaning products safe for vinyl planks. •TEST cleaning products before use. Mineral spirits applied to a clean rag can be used for spot cleaning. •Use non-staining casters, floor protectors on chair and table legs to distribute furniture weight and protect against scratches and indentation damage. (TRANQUILITY planks are scratch resistance, not scratch proof). • Protect your floor against burns. Planks can be damaged by burns from a cigarette, matches, or other extremely hot items. • Protect your floor from tracked-in dirt and grit particles by using natural-fiber mats at all outside entrances. Take the time to remove any imbedded grit particles from shoe soles before entering the room. Mats with rubber backings can cause permanent discoloration. • TRANQUILITY planks have good resistance to stains, not affected by most common household spills; however, any spill should be cleaned up immediately. The longer the spilled material is left on the floor, the greater the risk of permanently staining the floor.

DO NOT
• Do not use paste wax or solvent-based polishes. • Do not use abrasive cleansers or mop with soap-based detergents, these products can leave a sticky film on your floor . • Track in tar or asphalt from driveways, as this can also discolor vinyl. • Use caution with stiletto type high heels on your floor, these can cause permanent damage.
• Avoid the use of rubber or latex-backed mats, as certain rubber compounds can permanently stain vinyl (Consult the mat manufacturer to determine if the backing is safe for vinyl planks). • Avoid exposure to direct sunlight for prolonged periods; this can result in tile discoloration. Excessive temperatures might cause tile expansion or edge curling. During peak sunlight hours, the use of drapes or blinds is recommended especially on patio doors, etc., that receive intense sunlight

A:

Anywhere you can maintain room temperatures of 55°F- 95°F. ideally 65°F-75°F. Excess cold or heat can affect tightness of floor seams.

A:

Type, "Tranquillity" here and see the MSDS on this flooring - www.lumberliquidators.com/ll/flooring/Flooring101

A:

This product question would be better answered by our Sales Department, they are more familiar with all of our flooring products and can better assist you with your questions.
Please call our Sales Dept. @ (800) 476-0007 for pricing and availability. Thank you for your inquiry.