|
Prefinished Australian Cypress Stair Nose |
|
|
|
|
3/4" x 3 1/4" x 6.5 lft Australian Cypress Stair Nose Stair Nosing is used around steps, stair landing trims, and to elevate floor perimeters. Pieces come in 5" to 8" random lengths. |
REVIEW SNAPSHOT®
by PowerReviews(based on 9 reviews)
Ratings Distribution
100%
of respondents would recommend this to a friend.
Pros
Cons
Best Uses
Reviewed by 9 customers
Sort by
Displaying reviews 1-9
Pros
Cons
Best Uses
Comments about Prefinished Australian Cypress Stair Nose:
truly adds to the beauty of our home
Pros
Cons
Best Uses
Comments about Prefinished Australian Cypress Stair Nose:
very little waste.
makes the house look incredible.
Pros
Cons
Best Uses
Comments about Prefinished Australian Cypress Stair Nose:
Product itself is apparently very good.
Wearing will tell, it's Australian Cypress.
50 years guarantee on the finish seems
hard to believe.
Pros
Cons
Best Uses
Comments about Prefinished Australian Cypress Stair Nose:
My husband and my 72 year old mother installed this floor in our Montana log cabin. A floor nailer and tapping block was all they needed to install the Australian Cyprus. Mitered corners around the stair well were a little tricky, but otherwise it was very simple. The finish and feel are unbeatable!
Bottom Line Yes, I would recommend this to a friend
Images shared by The Straw Boss
Part way through installation
Images shared by The Straw Boss
Almost finished with install
(1 of 1 customers found this review helpful)
Was this review helpful? Yes / No
- You may also flag this review
Pros
Cons
Best Uses
Comments about Prefinished Australian Cypress Stair Nose:
We used Australian Cypress for the flooring in our master bedroom, den, and diningroom and it turned out wonderful. Very happy with our new flooring.
Pros
Cons
Best Uses
Comments about Prefinished Australian Cypress Stair Nose:
This would is absolutely beautiful when completed. It is so full of character (knots,grain, etc.)
Pros
Cons
Best Uses
Comments about Prefinished Australian Cypress Stair Nose:
[...] easy to install and looks great
Pros
Cons
Best Uses
Comments about Prefinished Australian Cypress Stair Nose:
We purchased the prefinished Australian Cypress. Our home is a new build and ever since it was installed every person that has been in our house has commented on how beautiful the hardwood flooring is. We love it.
Pros
Cons
Best Uses
Comments about Prefinished Australian Cypress Stair Nose:
Replacement of old flooring in small hallway area. It is now the nicest part of the hallway, now I have to fix up everything else, repaint, doors, etc... First time putting down hardwood floor (T&G), actually it came out pretty good. I cracked my first board but that was it. If that was my learning curve it was well worth it. Great Product!
Displaying reviews 1-9
Do you have questions about this product?
AnswerBox - Get answers from Staff Experts and real customers by clicking "Ask a question"
or click here to ask our Customer Service Team
Q:
Can this flooring be put down on a concrete slab? If so, how?1 answer
CUSTOMER CARE
A:
Yes. This can be floated or glued or use Elastilon (as your installation system).Q:
Is there any chance of dents or scratches from furniture legs?1 answer
A:
Moving heavy furniture over a hardwood floor can cause scratches. A good preventive measure is to use felt pads under the furniture to avoid unwanted scratches. Use floor protectors under desks and wide-load bearing rollers to minimize indentations and scratches from heavy objects such as office desk chairs. As a rule, the heavier the object, the wider the floor protector. Feel free to contact our product specialists at 800-476-0007 with any additional questions or to further discuss your project. Thank you for your inquiry.Q:
I plan to replace the carpeting in my house with hardwood flooring. I would like to do it myself using the floating method. My floors are concrete. What is a good underlayment to use for this method? Is Engineered flooring the best way to go?1 answer
A:
Engineered is the best product for your application.Q:
is the finish a HIGH GLOSS or can a high gloss urathane be applid over the existing finish?1 answer
A:
Our Bellawood floors are factory pre-finished with an aluminum oxide water-base urethane using a multi-step application process. (8) coats are applied to most domestic and exotic wood species and each coat is hard-cured using Ultraviolet (UV) light. Bellawood pre-finished flooring has a 55% gloss level (semi-gloss).Q:
Can the 3" and 5" be installed together in the same floor?1 answer
A:
Yes as long as the two products have come from the same mill.Q:
Can his product be installed over in floor radiant heat?1 answer
CUSTOMER CARE
A:
Yes, for details refer to the installation guide found under "Specs" tab on this floor's page.Q:
I have a tiled kitchen installed over 1/2" plywood which is installed over the original sub floor 2" boards.1 answer
A:
If the 50 year old subfloor meets these requirements as set forth in the installation instructions and the other criteria for installation; Yes.Q:
Is there a recommended method for installing this engineered floor on a grade level concrete slab?1 answer
A:
Yes. You can find complete installation instructions on the product page by clicking on the specs tab and then clicking on - Installation Guide.pdfQ:
Can you use throw rugs over engineered wood flooring?1 answer
CUSTOMER CARE
A:
Yes, rotating on occasion is wise for even UV lightning effect on the flooring. When using area rugs, use a rug pad with a felt, plant or PVC based backing. DO NOT use area rugs with a petroleum based rubber backing (typically black) as this can cause permanent chemical staining/etching of the floor finish.Q:
does this have a sound barrier on the bottom?1 answer
CUSTOMER CARE
A:
This is a real wood multi-ply floor with a red oak veneer 3.5 mm thick and a wood bottom. There is no padding attached like you can find on some of our laminate flooring.
 | ||||
| ||||
