Swatch Shadow
Best Price Guarantee
Email Deals | Weekly Sale | Request a catalog | Find a store
Virginia Mill Works Rustic 3/4"x3 1/4" Stained Finish Solid

Virginia Mill Works  3/4" x 3-1/4" Vintage Honey Oak

Virginia Mill Works Rustic 3/4"x3 1/4" Stained Finish Solid
Customer Rating

SKU: 10022906
Compare to anyone! Guaranteed low price!
Our Low Price CAD $4.56/sq. ft.
Over 1,000 sq. ft. CAD $4.46/sq. ft.
Available in select stores nationwide. Currently not available for online purchase. Check with your local store.

Virginia Mill Works Co.- 3/4" x 3-1/4" Vintage Honey Oak Prefinished Wire Brushed Solid Flooring- 30 Year Warranty

Colonial American homes were built with wooden floors that were sawn using basic hand-held tools. The hand-crafted workmanship that went into those floors can be found in Virginia Mill Works handscraped floors.
About Handscraped Flooring:
Handscraped or distressed hardwood floors have a natural worn appearance. They look like floors from the days when floors were finished by hand. The Vintage Honey Wire Brushed Oak is a rustic floor, brushed to replicate the look and texture of weathered wood. Boards are hand selected for frequent open character to add to the aged appearance.  
Please note this product is a nominal 3/4" thick, but due to its scraping process the thickness may be as thin as 5/8" in the scraped areas.

Planning your new remodeling project?
At Lumber Liquidators you will find the best resource on the web for everything about hardwood floors.
Call 1-800-HARDWOOD to speak to one of our sales associates.

Lumber Liquidators... More Floor, Less $$

6mil Poly Sheeting- 300 sft per roll 6mil Poly Sheeting- 300 sft per roll

As Low As CAD $19.99/EA

Quiet Walk Underlayment Quiet Walk Underlayment

As Low As CAD $49.99/EA

All Natural Floor Cleaner 1Gal All Natural Floor Cleaner 1Gal

As Low As CAD $25.19/EA

1-1/2 x 25 x 8' Builder Oak Countertop 1-1/2 x 25 x 8' Builder Oak Countertop

As Low As CAD $179.95/EA

Dream Home Foam Underlayment Dream Home Foam Underlayment

As Low As CAD $19.99/EA

1 1/2 x25 x 8 lft Maple Butcher Block Countertop 1 1/2 x25 x 8 lft Maple Butcher Block Countertop

As Low As CAD $259.99/EA

Premium Underlayment 100 Sq Ft Premium Underlayment 100 Sq Ft

As Low As CAD $89.99/EA

1 1/2 x 25 x12' American Walnut Countertop 1 1/2 x 25 x12' American Walnut Countertop

As Low As CAD $499.99/EA

2mm Cross-Linked Poly Foam Underlayment 2mm Cross-Linked Poly Foam Underlayment

As Low As CAD $39.99/EA

1-1/2 x 25 x 8 LFT Hevea Countertop 1-1/2 x 25 x 8 LFT Hevea Countertop

As Low As CAD $179.99/EA

You may need:
Molding & Trim
White Primed Quarter Round
Our Low Price CAD $0.79/LFT
9/16" x 3-1/4" x 8' PFJ Primed Colonial Baseboard
Our Low Price CAD $1.69/LFT
9/16" x 3/4" x 8" PFJ White Primed Shoe Molding
Our Low Price CAD $0.59/LFT
9/16" x 5-1/4" x 8' PFJ Primed Colonial Baseboard
Our Low Price CAD $2.09/LFT
9/16" x 7-1/4" PFJ White Primed Colonial Baseboard
Our Low Price CAD $3.29/LFT
New Scratch Away 8oz. Bottle
Our Low Price CAD $9.79/EA
Underlayment & Adhesives
Premium Underlayment 100 Sq Ft
Our Low Price CAD $89.99/EA
5 Gallon Bostik's Best Adhesive
Our Low Price CAD $223.99/EA
Bostik Ultimate Urethane Remover
Our Low Price CAD $27.99/EA
Ultrabond Urethane Cleaner
Our Low Price CAD $23.79/EA
Bostik Ultimate Remover Towels
Our Low Price CAD $25.19/EA
Dream Home
Insulayment 100 SFT ROLL
Our Low Price CAD $49.99/EA
White Silicone Vapor Paper 400 Sq Ft
Our Low Price CAD $19.99/EA

  • Brand:  Virginia Mill Works
  • FLOORING SKU:  10022906
  • Limited Warranty:  30 years
  • Trade Name:  Red Oak
  • Botanical Name:  Quercus Rubra
  • Marketing Name:  Red Oak
  • Janka Rating:  1290
  • AC Rating:  N/A
  • Width:  3 1/4"
  • Thickness:  3/4"
  • Construction:  Solid
  • Installation Type:  Nail
  • Sq. Ft. Per Box:  22
  • Hardness Rating:  Benchmark at 1290 on Janka Scale
  • Waste:  5%
  • Weight per box/unit:  61.38
  • Installation Details:  N/A

  • Please click here to download Adobe Reader.


by PowerReviews

(based on 8 reviews)

Ratings Distribution

  • 5 Stars



  • 4 Stars



  • 3 Stars



  • 2 Stars



  • 1 Stars




of respondents would recommend this to a friend.

Reviewed by 8 customers

Displaying reviews 1-8

Back to top


Very nice floor

By Al

from Pittsburgh,PA

Everything is fantastic about this floor. My only complaint is that I took 2 boxes back to the store (left over)less than a week after purchase and the floor was $3.79 a sq ft. I paid $4.59. I mentioned it to the salesman and he asked if the floor was down already. I said yes. As a result I couldn't get a price match-that's $240 for 300 sq ft. I think I should have received the price match in less than a weeks time.

  • Was this a gift?:
  • No

Easy to install and looks great.

By Champ

from Trenton, Michigan

Top quality flooring. Easy to install and results are beautiful. Great price also.Sales staff knowledgable, helpful and friendly.

  • Was this a gift?:
  • No

(1 of 1 customers found this review helpful)


I would recommend this floor!

By Sharon

from Chesapeake, Virginia


  • Affordable
  • Beautiful Color
  • Fairly easy to install


  • A Few Were Unusable
  • Not Very Many Long Boards
  • Some Were Crooked

Best Uses

    Overall I was happy with this flooring. There were a couple of pieces that were rough on the edges that could not be used. There were not enough long pieces as someone else notes in a reveiew of this product. When completed though, it was beautiful and we are happy with the end result.

    (6 of 6 customers found this review helpful)


    Just love it

    By DobiesRule

    from New York

    Verified Reviewer


    • Color
    • Easy to clean
    • satin finish
    • solid hardwood


      Best Uses

      • Active Households
      • Dogs
      • Family Room

      We just finished installing about 750sf on our 1st floor in 3 rooms. We are DIY'ers and did it ourselves, after never having installed a hardwood floor before. We used the Norge 15 floor nailer with 2" cleats which worked great. The floor is solid and no bounce. The finish is a satin, not high gloss, which won't show as much dirt, wear & tear and isn't as slippery. The color is a medium brown varied between a golden oak and provincial oak. If you like an older style flooring, the wood has many characteristics and doesn't look bland. Out of 1000 sf ordered, we had very little (1 box) that couldn't be used. There are many different lengths and if you plan the layout ahead of time, you won't have many cuts. We used the Bellawood premium underlayment and there is a noticable difference in the sound, even after having carpet, the rooms have better acoustics. We have a large and very active doberman that hasn't put any dents or scratch marks in it yet and if ever there is, they can be easily covered with scratch repair. I was nervous after reading some of the other reviews of this floor in the different sizes, but am glad I bit the bullet. I wasn't looking for a perfect floor, I wanted one we could use, and this was it! We're moving on to doing the bedrooms next!

      (2 of 2 customers found this review helpful)


      Love the flooring!

      By cfell

      from Ames, Iowa

      Verified Reviewer


      • Beautiful Color
      • Love the vintage look


        Best Uses

        • Bedroom
        • Dining room
        • great room
        • Kitchen

        We had a professional flooring contractor put the flooring in all areas (except bath and laundry) of upper floor of our townhome.
        We just love the color and the vintage feel of the wood. The warm brown stain on the flooring has helped to tone down the exsisting lighter yellowy woodwork and honey oak cabnets and doors.
        Our contractor said that there was a absolutely no waste.
        It has only been in for a week so haven't seen any negatives yet.

        (3 of 4 customers found this review helpful)


        Looks Great But....

        By Barb - wife of a handyman

        from Janesville, WI

        Verified Reviewer


        • Floor is beautiful
        • Nice Finish Not Glossy


        • Quality

        Best Uses

          We used this in our living room and it is beautiful. However I really had to search for pieces that did not have splits in the tongue or parts of the groove completely broken off. I don't think that many of the pieces should have ever passed quality control. If my husband was not as handy as he is we would have run very short of product to finish the floor! He had to cut the bad wood off and then fabricate either the tongue or groove so the we could use the pieces. We had lots of unsalvagable scrap. Some of the pieces were just so rough that they would have snagged your socks or gave you a splinter in your feet!! I am very pleased with the finished product but disappointed in the quality.

          (3 of 3 customers found this review helpful)


          Comments of flooriing

          By Golden Girl

          from Shorewood, IL

          Verified Reviewer


          • The flooring looks great


          • It has cracks in the wood

          Best Uses

          • Ask detailed questions

          I love the color and look of the flooring, but no one in sales told me there would be cracks in the flooring. When I called them they told me it is a 'vintage' flooring and to be expected. How would I know what that means? Not happy about that. I do perfer the non shinning flooring. Between the color and finish, it won't show the dust as much as the dark colors hand high gloss finishes you see today.

          (10 of 10 customers found this review helpful)


          Great floor for high traffic and pets

          By DIY Mom

          from Charlotte, NC

          Verified Reviewer

          Just finished laying 256 sq ft. and it looks great. Picked this because of satin finish and semi-rough texture of wood. Satin finish does not show dust, dog hair and dirt as much as high gloss. Room has high traffic and I have two large dogs and they have not scratched it yet. I placed felt protector under all legs of furniture. While laying floor I even dropped my hammer on it a couple of times and floor did not dent. Floor is oak but finish used is very hard. Any scratches can easily be covered up with scratch cover and would look like it is part of the original flooring. Great medium brown color. Will be laying this floor in dining room and parlor next. There were some boards that are narrower but saved these and used them at the end to rip narrower planks to finish room. Due to the nature of the wood there are knots and many grain variations but that just added to the old world, antiqued look. Did have some boards with splits but used the good parts for the end of a row etc.. Besides a cleat nailer I purchased Skil 3600 floor saw to cut boards, rip lengths and even miter shoe molding- great tool.

          Displaying reviews 1-8

          Back to top

          Do you have questions about this product?

          AnswerBox - Get answers from Staff Experts and real customers by clicking "Ask a question" or click here to ask our Customer Service Team

          6 Questions | 6 Answers
          Displaying questions 1-6
          • Q:

            What would be needed to lay this on concrete?
            Asked on 3/21/2013 by Gale the Do It Your Self 'r from Sun City, CA

            1 answer

            • CUSTOMER CARE


              You can achieve this by using Elastilon. This can be used as your installation system for over concrete or any flat subfloor.

              Elastilon Self Adhesive Underlayment is a good option for any flat subfloor. You can use up to 3/4" thick or thinner solid or tongue and groove engineered flooring (works best with 1/2" or thicker). Floating with Elastilon needs to have an expansion break for spans over 33' on it's width, but not length.

              Elastilon -

              More info -

              ELASTILON - Video of basic installation.

              Answered on 3/24/2013 by Tech & Install
          • Q:

            Is an underlayment recommended with solid hardwood over a 3/4" T&G plywood subfloor?
            Asked on 2/13/2013 by Allan

            1 answer

            • CUSTOMER CARE


              15lb felt paper or White Silicone paper should be used if over a basement or crawl space. For 2nd floor or higher only red rosing paper to aid installation.

              Answered on 2/14/2013 by Tech & Install
          • Q:

            What is the price w/ installation & all finishing?
            Asked on 12/30/2012 by Anonymous

            1 answer

            • CUSTOMER CARE


              The Lumber Liquidators Installation Service is managed by The Home Service Store (HSS).HSS @ 1-877-477-1116

              Installation Estimates will vary according to product, installation method, condition of subfloor, etc. Basic hardwood, bamboo, or engineered starts at $2.50 per square foot. Floating flooring including vinyl, laminate, some engineered, from $1.99. An installer can provide an accurate estimate and can be contacted at the above number or by the link below. (flooring price is separate and can be ordered online, through our catalog, at your local Lumber Liquidators or call 1-800-427-3966)

              Installation Service Information -


              Answered on 1/3/2013 by Tech & Install
          • Q:

            Can the 2 1/4", 3 1/4" and the 5" all be used together on the same floor?
            Asked on 11/13/2012 by craig from United States

            1 answer

            • CUSTOMER CARE


              Yes as long as they are all from the same mill so tongue and groove will fit.

              Answered on 11/28/2012 by Tech & Install
          • Q:

            Are the pieces random length or are they all a standard length?
            Asked on 7/30/2012 by Gary from Lancaster, Pa

            1 answer

            • Staff Reviewer


              These boards will come in random lengths that will range from 12" - 59"

              Answered on 8/8/2012 by Patricia from 1024
          • Q:

            What kind of finish is on this floor - is it just poly or aluminum oxide?

            do you have any 3/4" with finished with aluminum oxide?
            Asked on 7/14/2012 by Bridget from Keller, Tx.

            1 answer

            • Staff Reviewer


              This material has a water based polyurethane finish with aluminum oxide throughout

              Answered on 7/18/2012 by Patricia from 1024
          Displaying questions 1-6

          Do you have a question about this product? 

          * indicates required fields  
          Your Info » * Your Name:
          * Email Address:
          Your Friend's Info » * Friend's Name:
          * Email Address:
          Your Message » Your Message:
            No need to include a link to this page, we'll do that.
            Send Email

          back to top