Swatch Shadow
repbanner
 
1-800-HARDWOOD (1-800-427-3966)   |  Customer Care   |  En Español   
Log In   |   My Account   |  Shopping Cart   |  Order Status  
End of Year Clearance!
No Interest if Paid in Full by January 2017!
Get 10% Off Professional Installation!
All Laminate and Vinyl Plank on Sale!
All Prefinished Bamboo on Sale!
All Prefinished Hardwood on Sale!
All Bellawood on Sale!
More Savings on All Clearance and Closeouts!



Flooring 101The Floor Finder
Hi there,
Here is our living room. We just had the install done last week and simply love the changes. Not only is the hardwood beautiful but the whole house is so clean without that dust collecting carpet in here. Just look at the shine from the windows.

We had Brazillian Teak 5" wide 3/4" hardwood installed by your recommended installer and love the new floor.

Thanks,

Tina R.
Woodlawn, TN
CLEARANCE! 3/4" x 5" Cumaru | Lumber Liquidators
BELLAWOOD Select 3/4"x5" Cumaru Coumarouna Odorata 3540 Clear Finish Solid

BELLAWOOD  CLEARANCE! 3/4" x 5" Cumaru

BELLAWOOD Select 3/4"x5" Cumaru Coumarouna Odorata 3540 Clear Finish Solid
Customer Rating


Product Description
Accessories and Trim
Specslist
Product Reviews
Questions and Answers
Email a Friend


BELLAWOOD 3/4" x 5" Cumaru Prefinished Solid Hardwood Flooring

A Floor so Special, Home Sellers mention it by Name. When selling a home, unique features come first. And the name "Bellawood" can be found at the top of sellers' lists again and again. Couple that with a Certified 100 Year Transferable Warranty and it's certain to catch the eye of discerning buyers when the time comes.

Beautiful Cumaru offers an array of colors, with rich honey browns, to light creams and subtle reds dispersed throughout. And true to natures's design, its dynamic grain flows from straight to wavy for a truly one-of-a-kind floor. Better yet, Cumaru sits near the top of the durability scale, which means its extraordinary beauty stands the test of time.
This product is proudly finished in the USA.

About "Select Grade" Flooring
Select Grade has the most uniform color with no large knots and the longest average lenght of planks. Also referred to as First Grade.

It Taber Tested "the Best." When subjected to the industry sandpaper abrasion test, known as Taber Testing, Bellawood's durability results were more than double most comparably priced floors. There's good, there's better?and then there's Bellawood.

  We caught up with real Lumber Liquidators' customers who volunteered to discuss their floor shopping, buying and installation experiences. In no way did these customers receive compensation for their kind words. (They're speaking straight from the heart.)

 


QUALITY GUARANTEE: NO formaldehyde is used in the manufacturing or construction of this flooring.
Click here to learn more.

You may need:
Accessories and Trim:
Our Low Price $3.16/LFT

Qty:  

Add To Cart
Comparable Price $8.99/LFT
Our Low Price $6.96/LFT

Qty:  

Add To Cart
Comparable Price $11.49/LFT
Our Low Price $9.96/LFT

Qty:  

Add To Cart
Our Low Price $7.96/LFT

Qty:  

Add To Cart
Comparable Price $11.39/LFT
Our Low Price $9.96/LFT

Qty:  

Add To Cart
Our Low Price $49.95/EA

Qty:  

Add To Cart
Show More / Less Trim
 
 
Our Low Price $6.96/EA

Qty:  

Add To Cart
Comparable Price $10.99/EA
Our Low Price $6.99/EA

Qty:  

Add To Cart
Comparable Price $12.99/EA
Our Low Price $7.99/EA

Qty:  

Add To Cart
Comparable Price $12.99/EA
Our Low Price $7.99/EA

Qty:  

Add To Cart
Show More / Less Accessories
 
 
  • Brand: BELLAWOOD
  • FLOORING SKU: 10001802
  • Limited Warranty: 100 years
  • Trade Name: Cumaru
  • Botanical Name: Coumarouna Odorata
  • Marketing Name: Cumaru
  • Janka Rating: 3540
  • AC Rating: N/A
  • Width: 5"
  • Thickness: 3/4"
  • Construction: Solid
  • Installation Type: Nail, Staple
  • Sq. Ft. Per Box: 23.33
  • Hardness Rating: 174% harder than Red Oak
  • Waste: 10%
  • Installation Details:  Installation Guide.pdf


  • Please click here to download Adobe Reader.

REVIEW SNAPSHOT®

by PowerReviews
BELLAWOOD3/4" x 5" Brazilian Teak
 
4.0

(based on 2 reviews)

Ratings Distribution

  • 5 Stars

     

    (0)

  • 4 Stars

     

    (2)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

Reviewed by 2 customers

Sort by

Displaying reviews 1-2

Back to top

(2 of 2 customers found this review helpful)

 
4.0

Looks Great, but takes time

By Slim D

from Delmar, MD

About Me Avid Do-It-Yourselfer

Verified Reviewer

Pros

  • Attractive Finish
  • Beautiful Color
  • Durable

Cons

  • Difficult To Install

Best Uses

  • Dining Room
  • Family Room
  • Living Room
  • Office

Comments about BELLAWOOD 3/4" x 5" Brazilian Teak:

I used this wood with a 3-1/4" Maple inlay around the room. It looks nice, but the milling was suspect to me. The boards varied from 4-7/8" to 5-1/8", most around 4-15/16" to 5"... This made it difficult to match the runs across the room. It sometimes took 13-15 boards before we would find a board the same width. Board widths varied on some boards close to 1/8 of an inch end to end. This made the install more difficult than it should have been. Count on adding 15% to your install time using this product.

(1 of 1 customers found this review helpful)

 
4.0

Nice Stuff, but hard!

By Matt G

from Bellingham Wa

About Me Avid Do-It-Yourselfer

Pros

  • Attractive Finish
  • Beautiful Color
  • Durable
  • Easy To Clean

Cons

  • Difficult To Install

Best Uses

  • Bedroom
  • Dining Room
  • Family Room
  • Kitchen
  • Living Room
  • Office

Comments about BELLAWOOD 3/4" x 5" Brazilian Teak:

Nice stuff

Displaying reviews 1-2

Back to top


Do you have questions about this product?

AnswerBox - Get answers from Staff Experts and real customers by clicking "Ask a question"

or click here to ask our Customer Service Team

29 Questions | 30 Answers
Displaying questions 1-10Previous | Next »
  • Q:

    can this flooring be installed over original hard wood flooring or do we have to take it up.
    Asked on 2/22/2014 by Pamela from Colorado

    1 answer

    • CUSTOMER CARE

      A:

      Minimum of 3/8 ̋CDX panel thickness is recommended when used as an underlayment over an existing floor. This is to isolate the different expansion and contraction rates from the different floors, reducing squeaks and nail popping.

      Answered on 2/26/2014 by Tech & Install
  • Q:

    Is this Cumaru/Teak consider a Dark Teak or a Light Teak? Or is it a random mix of both dark and light boards?
    Asked on 1/18/2014 by Mark from United States

    1 answer

    • Staff Reviewer

      A:

      This product question would be better answered by our Sales Department, they are more familiar with all of our flooring products and can better assist you with your questions. Please call our Sales Dept. @ (800) 476-0007. Thank you for your inquiry.

      Answered on 1/20/2014 by cc-3
  • Q:

    Bellawood 3/4 x 5 Cumaroo - Is this product considered Exotic or Domestic?
    Asked on 10/15/2013 by Not Applicable from Wisconsin

    1 answer

    • Staff Reviewer

      A:

      This is a Exotic wood.
      Thank you for your inquiry

      Answered on 10/22/2013 by cc-3
  • Q:

    how long should we let the wood sit in our rooms to "acclimate" before installation?
    Asked on 8/8/2013 by Rik

    1 answer

    • CUSTOMER CARE

      A:

      Generally 1 to 2 weeks in the room to be installed however time is not the only factor. After harvesting, wood flooring is kiln-dried for optimum service. Wood is hygroscopic, meaning its size and shape changes with the absorption or release of moisture. The amount of change varies with wood species, cut, and type of flooring. Therefore, controlling wood moisture content (mc) is important for success. First, acclimate the new flooring inside the home in consistent indoor temperatures of 60°-80° F and indoor humidity levels of 30% - 50%. Using a reliable species specific moisture meter, measure the moisture of the wood subfloor and flooring. The difference between the moisture of the wood subfloor and wood flooring should not exceed 4%, or 2% for planks 3” or wider (See moisture testing) Continue to acclimate the flooring until you meet these requirements. The length of acclimation time is not the determining factor. The goal of acclimation is to reach a balance between the core of the new flooring with its surroundings before assembly, fastening or installation. Depending on your local in-home conditions the use of humidification/dehumidification equipment to maintain proper in-home environment is strongly recommended. Never install wood flooring in rooms or homes that are not climate controlled. Acclimation is the responsibility of those overseeing the project. Not following the above recommendations can negatively impact board performance and can result in excessive movement, squeaks, board gapping, board-edge cupping, finish and other related issues.

      Answered on 8/13/2013 by Tech & Install
  • Q:

    hi
    is use of this consistent with LEED specifications for sustainability and responsible forestry?
    thank you
    Asked on 8/7/2013 by contractor from hermosa beach

    1 answer

    • Staff Reviewer

      A:

      LL has implemented a rigorous due diligence process to ensure its solid wood flooring products are sourced only from sustainable and responsible sources. However, this product is not FSC-certified and is not eligible for the LEED v4 MRc7 Certified Wood Credit.
      Thank you for your inquiry.

      Answered on 8/8/2013 by cc-2
  • Q:

    How does Brazilian teak hold up with dogs and their nails? Does it scratch easily?
    Asked on 6/13/2013 by dennis from iowa

    1 answer

    • Staff Reviewer

      A:

      The way a floor is treated or maintained can affect its longevity. In addition, there is no relationship between the hardness or denseness of exotic species and its resistance to surface scratches. Wood floor manufactures do not offer warranties of protection against denting or scratches, rather product warranties refer to milling defects and finish wear within specified periods of time.
      While some finishes may claim to be harder, all top finishes whether Oil or Water based urethanes are generally listed as scratch resistant though not scratch proof. Actually, our pre-finished Bellawood and Dura-Wood is superior to any site applied finish. This is because site finished floors with only 2 or 3 coats require time to fully “air cure” which can be problematic on days with high humidity.
      Our Bellawood floors are factory pre-finished with an aluminum oxide water-base urethane. Using a multi-step application process, (8) coats are applied to most domestic and exotic wood species and each coat is hard-cured using Ultraviolet (UV) light. Bellawood pre-finished flooring offers superior wear resistance and is backed by a limited 100-year warranty! Maintaining the appearance of any wood floor requires close attention to in-door climate controls during seasonal changes.
      Wood floors like furniture will scratch and dent if not properly protected. It is recommended to use furniture pads (included in our cleaning kit) under the furniture legs. Pet nails should be kept trimmed and sharp objects (including high heels) kept away from the floor. Often scratches can be adequately repaired using liquid scratch covers. Dents and nicks can be filled using wood floor repair kits available at your local home store. If your floor is severely damaged please consult a professional about refinishing, an individual board replacement may be all that’s needed.
      Thank you for your inquiry

      Answered on 7/2/2013 by cc-1
  • Q:

    Good Day! What is the AVERAGE length of wood? I understand they are 1' - 7' in lengths, but I don't want to end up with more short lengths than long lengths (I do not like that look). Thank you!
    Asked on 10/8/2012 by karen from michigan

    1 answer

    • Staff Reviewer

      A:

      Select Grade:
      This is a random length wood product that comes 1’ to 7’ in length, the average length is about 3.25'. Thank you for your inquiry.

      Answered on 10/11/2012 by cc-2
  • Q:

    My house was just installed B. teak 3/4*5". I noticed when the sun light get in, I see bumps on the surface where the nails are locted in most of the plank. The nail were used standard u shape, like staple.The floor doesn't look smooth, look like ocean? Is it too long nail? Under neath was sub floor, not concrete.
    How to correct it.
    Thanks,
    T.
    Asked on 7/28/2012 by Tom from Belmont,ca

    1 answer

    • Staff Reviewer

      A:

      The recommended fastener for this exotic species is an 18 gauge cleat nailer (as covered in our installation instructions).
      You can find complete installation instructions on the product page by clicking on the specs tab and then clicking on - Installation Guide.pdf
      Unfortunately the only way to get rid of the bumps is to sand the entire floor down and refinish.
      Thank you for writing in.

      Answered on 8/2/2012 by cc-2
  • Q:

    Could the Brazilian Teak 3/4" x 5" be glued down to concrete slab?
    I would use Bostik's MVP 4 moisture barrier.
    Thanks.
    Asked on 6/29/2012 by oroz from FL

    1 answer

    • Staff Reviewer

      A:

      Unfortunately not recommended.
      This is a solid 3/4" product designed to be nailed to a wood substrate.
      But can be installed over concrete using our Elastilon underlayment.
      What you should know about Elastilon Strong
      An Elastilon-backed wood floor is much faster to install than traditional nail or glue-down methods.
      Elastilon Strong can be installed on new concrete floors, handling up to 3.9% moisture content. A vapour barrier of at least 6 mil PE should be used below grade and on newly poured concrete above grade where the moisture content is above 3.9%.
      Laid down with a 5/8” (15 mm) expansion gap, Elastilon Strong creates a dynamic, floating floor that expands or contracts naturally with the hardwood.
      Elastilon Strong has no odor and is free of volatile materials.
      Elastilon Strong gives cushioned comfort.
      1/8” (3 mm) thick Elastilon Strong has ratings of IIC 62 and STC 54.
      Thermal resistance: R _ 0,15 (m K) / W
      Elastilon Strong carries a 70-year limited warranty. Thank you for your inquiry.

      Answered on 7/9/2012 by cc-2
  • Q:

    Is this true Brazilian teak or is it just colored to look like Teak? Can it be used on a boat deck?
    Asked on 6/24/2012 by Thomas from United States

    1 answer

    • CUSTOMER CARE

      A:

      Cumaru, also known as Brazilian Teak, is an increasingly popular hardwood used for flooring in the US. While it is moisture resistant, and used as an outdoor decking material (UNFINISHED only), it is not classified as marine teak. Urethane Prefinished flooring should not be used in anything but a climate controlled building.

      Answered on 6/25/2012 by Tech & Install
Displaying questions 1-10Previous | Next »

Do you have a question about this product? 


Email This Page to a Friend
* indicates required fields  
Your Info » * Your Name:
* Email Address:
Your Friend's Info » * Friend's Name:
* Email Address:
Your Message » Your Message:
  No need to include a link to this page, we'll do that.
      Don't Send Email


 




LOADING
















LOADING












loading...