Bostik 2' x 30' HeatStep 120V Mat Kit
2 ft x 30 ft HeatStep 120V Mat Kit
HeatStep Wire is an electric floor warming wire system that may be used under engineered hardwood, ceramic tile, or stone floorcovering materials. HeatStep Wire must be embedded in a 1/4" to 1/2" thick cementitious layer. Bostik SL-150, WebCrete 95, WebCrete 98, or UltraFinish, or any Bostikthin set may be used for tile applications.
HeatStep is a safe, comfortable, and cost-efficient electric radiant heat system that can be used on concrete slab or plywood substrates. Almost every type of floor covering can be warmed with Heatstep, including engineered hardwood, ceramic and porcelain tile, stone, laminates, vinyl, or carpet.
Warm, luxurious floors are popular in bathrooms, shower floors, kitchens, entries, or any room with cold floors
Designed for safety, all HeatStep cables are built with dual wires to shield against EMF (Electromagnetic Fields). HeatStep products are fully grounded and operate with ground fault circuit protection when using a HeatStep thermostat control.
Do you have questions about this product?
AnswerBox - Get answers from Staff Experts and real customers by clicking "Ask a question" or click here to ask our Customer Service Team
Q:I have 12X10 dinning area plus little space for kitchen I install three rolls of 2x20 rolls of heating floors. How i have only one thermostat. Thermostat manual said that i can use up to 150 sqft of heating floors. I have only 120 sqft but i have three rolls. How can i connect them together?
A:You can find complete installation instructions on the product page by clicking on the installation tab and then clicking on - Installation Guide.
Q:Can the "Heat Step" wire-mat product be installed over vinyl tile (which is over the concrete slab) and under laminate flooring?
A:This application would not be recommended.
Q:Can this be used under stranded bamboo flooring?
A:Our bamboo manufacturers warn against the use of bamboo over radiant heat.