Swatch Shadow
repbanner
 
1-800-HARDWOOD (1-800-427-3966)   |  Customer Care   |  En Español   
Log In   |   My Account   |  Shopping Cart   |  Order Status  
Unfinished Southern Yellow Pine T-Molding

Unfinished Southern Yellow Pine T-Molding

Unfinished Southern Yellow Pine T-Molding
Customer Rating


SKU: 10000283
Our Low Price $1.96/linear ft. Special Price $0.98/linear ft.
Your
Linear
Feet:



Check Measurement

6.5 linear ft. each
$6.37 each
Your Material Cost:


Add To Cart
Add this product to your wish list   Add to Wish List

Unfinished Southern Yellow Pine T-Molding
Unfinished

This item was successfully added to your cart.
Continue Shopping

Checkout Now


Unfinished Southern Yellow Pine T-Molding- 1/2" x 2" x 78"

T-Moldings provide an attractive solution for blending floor surfaces in adjoining rooms.
Used in doorways and borders where floors of similar thicknesses meet.

Want more?
We also offer professional installation options at great prices!
Schedule your professional in-home measure & estimate today
Call 1-877-477-1116 or click here for more information.

 


Do you have questions about this product?

AnswerBox - Get answers from Staff Experts and real customers by clicking "Ask a question"

or click here to ask our Customer Service Team

3 Questions | 5 Answers
Displaying questions 1-3
  • Q:

    What is the width of the center peice for the SYP TM?
    Asked on 6/23/2014 by Store 013 from Richmond, VA

    1 answer

    • Staff Reviewer

      A:

      It is 1/2" wide.
      Thank you for your inquiry.

      Answered on 6/25/2014 by cc-2
  • Q:

    do any of your T-mouldings come in lengths longer than 78"?
    Asked on 2/20/2014 by todpod58

    1 answer

    • Staff Reviewer

      A:

      Some of our unfinished moldings come in longer lengths.
      Please call our Sales Dept. @ (800) 476-0007 for pricing and availability. Thank you for your inquiry.

      Answered on 2/27/2014 by cc-2
  • Q:

    When using T moldings for an expansion gap in a doorway, first question is how are these normally attached to floor when using laminate, and secondly, how much clearance should be allowed on either side of the t molding base and the laminate on either side of it ?

    PS...thank you on my previous question that was answered quickly
    Asked on 10/16/2013 by Ron from New Gloucester, Maine

    3 answers

    • Staff Reviewer

      A:

      Match the molding up to a piece of flooring on a flat surface to verify size.
      • *You may need to use spacer/shims for a proper fit.
      • For wood substrates; pre-drill and use a 6d finish nail or finish screw to secure, counter sink with a nail set and putty with matching filler.
      • To attach the molding to concrete:
      • Be sure to make sure there are no contaminants such as paint, oil, grease etc. that could affect the adhesive bond.
      • Apply one or two 1/4 inch beads of 100% urethane construction adhesive to the subfloor and seat the molding in place. Clean off any excess glue promptly with mineral spirits.
      • Use something heavy temporarily to hold the trim down for a minimum of 16 hours to ensure a good bond.
      Leave a 3/8" to 1/2" space on either side of leg of the T molding.

      Answered on 10/23/2013 by cc-2
    • Staff Reviewer

      A:

      Match the molding up to a piece of flooring on a flat surface to verify size.
      • *You may need to use spacer/shims for a proper fit.
      • For wood substrates; pre-drill and use a 6d finish nail or finish screw to secure, counter sink with a nail set and putty with matching filler.
      • To attach the molding to concrete:
      • Be sure to make sure there are no contaminants such as paint, oil, grease etc. that could affect the adhesive bond.
      • Apply one or two 1/4 inch beads of 100% urethane construction adhesive to the subfloor and seat the molding in place. Clean off any excess glue promptly with mineral spirits.
      • Use something heavy temporarily to hold the trim down for a minimum of 16 hours to ensure a good bond.
      Leave a 3/8" to 1/2" space on either side of leg of the T molding.

      Answered on 10/23/2013 by cc-2
    • Staff Reviewer

      A:

      Match the molding up to a piece of flooring on a flat surface to verify size.
      • *You may need to use spacer/shims for a proper fit.
      • For wood substrates; pre-drill and use a 6d finish nail or finish screw to secure, counter sink with a nail set and putty with matching filler.
      • To attach the molding to concrete:
      • Be sure to make sure there are no contaminants such as paint, oil, grease etc. that could affect the adhesive bond.
      • Apply one or two 1/4 inch beads of 100% urethane construction adhesive to the subfloor and seat the molding in place. Clean off any excess glue promptly with mineral spirits.
      • Use something heavy temporarily to hold the trim down for a minimum of 16 hours to ensure a good bond.
      Leave a 3/8" to 1/2" space on either side of leg of the T molding.

      Answered on 10/23/2013 by cc-2
Displaying questions 1-3

Do you have a question about this product? 




back to top
 
loading...