Swatch Shadow
repbanner
 
1-800-HARDWOOD (1-800-427-3966)   |  Customer Care   |  En Español   
Log In   |   My Account   |  Shopping Cart   |  Order Status  
1/2" x 3/4 x 6.5 LFT Brazilian Walnut Shoe Molding

1/2" x 3/4 x 6.5 LFT Brazilian Walnut Shoe Molding

1/2" x 3/4 x 6.5 LFT Brazilian Walnut Shoe Molding
Customer Rating


SKU: 10011259
Our Low Price $3.16/linear ft.
Your
Linear
Feet:



Check Measurement

6.5 linear ft. each
$20.54 each
Your Material Cost:


Add To Cart
Add this product to your wish list   Add to Wish List

1/2" x 3/4 x 6.5 LFT Brazilian Walnut Shoe Molding
Clear Finish

This item was successfully added to your cart.
Continue Shopping

Checkout Now

1/2" x 3/4 x 6.5 LFT Brazilian Walnut Shoe Molding

Transitions between a wood floor and a vertical surface under cabinetry. Also serves as a substitute for quarter round when space is limited.

 

Do you have questions about this product?

AnswerBox - Get answers from Staff Experts and real customers by clicking "Ask a question"

or click here to ask our Customer Service Team

1 Question | 1 Answer
Displaying question 1
  • Q:

    WHAT IS THE BEST NAIL TO USE ON THIS PRODUCT. MY 16 GAUGE NAILS ARE SPLITTING IT
    Asked on 4/27/2011 by DAN from NEW HOPE, PA

    1 answer

    • CUSTOMER CARE

      A:

      4d-6d finish nails will work for this shoe molding. Predrill because of hardness of Brazilian Walnut. Flooring; Brazilian Walnut is 182% harder than red oak. Cleat nailers rather than staples have a better chance of penetrating the harder exotics. Better chance for 5/16", 3/8", and 1/2" is a 18 and 20 gage nail with a 50P or 200 POWERNAIL nailer. 18 gage with a 50P and a 3/4" adapter plate can work best on very hard 3/4"exotics. Or equivalent nailer.

      If Hand Nailing is Necessary-
      One person can pre-drill the nail holes with a 3/32" (2mm) bit, the next can complete the nailing. For boards 2 1/4"-3 1/2" wide place a 2" nail, every 8”-10” inches along the side tongue edge and 2"-3" from the board ends. The wider the board the closer the nail spacing.
      Use- galvanized or regular finishing nails 6d-7d.

      Answered on 4/28/2011 by Tech & Install
Displaying question 1

Do you have a question about this product? 




back to top
 
loading...