Floating Stair Step Installations:
You will need to cut off the existing overhanging nosing on each step first.
1. Starting from the bottom of the staircase working up, cut the stair riser to match the height and width of the step. The risers can be made from the flooring or other finished material.
2. The Stair Nosing is then installed to overlap the flooring on step and cover the riser.
(Nail and glue for safety,)
3. Cut the flooring Stair and Nosing to length.
4. An additional "filler" piece of flooring must be added to the back of the flooring.
The Steps and Risers should be attached by direct gluing to the stair using 100% urethane
construction adhesive. (For safety, omit all padding)
Thank you for your inquiry.
Answered on 11/9/2011 by customer care 2