|
|
Bostik Bostik Best Adhesive 10oz |
|
|
Bostik's Best Adhesive- 10.1oz Cartridge Bostik's Best Adhesive is a one-part, moisture-cure adhesive . Once cured, its superior elastromeric properties provide a tough, flexible, tenacious bond to wood flooring.
|
Reviewed by 12 customers
Sort by
Displaying reviews 1-10
Previous | Next »
Pros
Cons
Best Uses
Used to retain laminate reducers
Worked great on trim pieces that couldn't be nailed.
Pros
Cons
Best Uses
its not as good as pl and it was over priced
Pros
Cons
Best Uses
I don't recommend this product. It took forever to dry, the product did not hold down the bamboo transition strips.
Pros
Cons
Best Uses
Good stuff. Worked very well on my stair treads.
This seems to work very well. I used this on my rises and treads for the stairs, as well as gluing the quarter round to my fireplace brick.
This seems to work well after letting it sit overnight. It has a tendency to keep coming out of the tube even when pressure is relieved.
Pros
Cons
Best Uses
This adhesive is awesome! It's one that you can mold while it cures, but once set, it sets solid.
Not as good as liquid nails.
Pros
Cons
Best Uses
Good stuff very handy Just get what you need instead of a bucket
Flooring I bought was darker than what I picked from the sample. I figured it would have been the midpoint as far as tone. Out of 35 boxes, there were probably only 10 pieces that actually matched the color. The rest were darker. I also wish the salesperson or the floor sample said that there was a micro-bevel. I did finally notice this 2 weeks after I looked at my receipt from when I actually went back and made the purchase. Floor is ok. Adhesive...So far I guess ok. It glued down a cork underlayment, so I'll probably never know whether it did it's job or not. Barring some extreme malfunction. Thank you for asking.
Displaying reviews 1-10
Previous | Next »
Do you have questions about this product?
AnswerBox - Get answers from Staff Experts and real customers by clicking "Ask a question"
or click here to ask our Customer Service Team
Q:
I need to re-glue about 15 square feet of cheap parquet flooring to concrete. It's above grade, but moisture penetrates the concrete and has buckled the parquet. What do you recommend?1 answer
CUSTOMER CARE
A:
Moisture wicking up through the concrete subfloor is a severe problem which will require removal of flooring and a remedy to moisture before any other flooring installation. For tips on moisture issues type, "moisture reduction" in our Flooring 101 Search here - http://www.lumberliquidators.com/ll/flooring/Flooring101Q:
Can Bostik Best Adhesive or Mapei Ultrabond be used for putting down last 4 rows of 3/4 Solid Brazilian Cherry instead of face nailing? If so which would you recommend?1 answer
A:
It is not recommended to mix installation (glue and nail) methods on an install.Q:
I have gaps in my floating vinyl wood plank flooring that has some gaps at the butt ends and even after pushing them back the gaps reappear. Can I have the installer push the planks back together and then use this product to fasten those planks to the subfloor...or glue the butt ends together?1 answer
A:
I would recommend using a contact adhesive to help hold the joints together.Q:
can I use this to repair a small section of hard wood parquat flooring? If so what size notched trowel should I use?1 answer
A:
Yes you can.Q:
Would Bostik's Best ADHESIVE be a suitable glue to use on wood threshold joining ceramic tile and Engineered hardwood floor. looking for a flexible glue to use so i can remonve the molding without breaking at a later date to replace the tile. Or what would you recommend.1 answer
A:
This is probably the best adhesive for your application but it cannot be guaranteed that the transition will not break when removing.Q:
How much does one bottle cover square footage wise?1 answer
A:
There are no quantative numbers for sq ftg for this adhesive cartridge because this is not made to be troweled out onto the floor. It will depend on what size trowel is used.Q:
is it 100 % urathan ?1 answer
A:
Yes Bostik's Best is a 100% (moisture cured) urethane adhesive.