|
Bostik Bostik Seal-N-Grip 4 gallons |
|
|
|
|
Seal-N-Grip Adhesive- 4 gallons Adhesive and moisture vapor protection in a one-step application reduces labor, time and cost.
|
REVIEW SNAPSHOT®
by PowerReviews(based on 15 reviews)
Ratings Distribution
100%
of respondents would recommend this to a friend.
Reviewed by 15 customers
Sort by
Displaying reviews 1-10
Previous | Next »
Pros
Cons
Best Uses
It gives a nice spring to my hardwood floors especially if applying to a concrete slab like I did. Also no need to purchase or install an underpayment so the high price of the adhesive is off-set by this.
Pros
Cons
Best Uses
Ensure all body parts are covered before beginning application.
Pros
Cons
Best Uses
If you read the directions on the can you will not make any mistakes or have issues. The product does exactly what it says as per the specs. Purchase extra trowels per every two buckets used and toss in the trash. In addition buy a small putty knife to get the remaining product out of the can.
Clean up is easy if you use gloves and the cleaner that is sold. This is a very expensive product so read the directions and there should be no problems with your install.
Bottom Line Yes, I would recommend this to a friend
Images shared by Dave
(1 of 1 customers found this review helpful)
Was this review helpful? Yes / No
- You may also flag this review
Pros
Cons
Best Uses
Our installer used to lay engineered wood floor and was very pleased with the quality of the product. it was a glue and moisture barrier in one which made the job go faster and easier.
Pros
Cons
Best Uses
Love the fact you can skip the vapor barrier step with this product
easier to work with than the thinner glues,clean up a little hard if it gets on your bare hand a good thin gloves is recommended,great vapor barrier i test it before i use it, its marvelous. If there is any dust on floor you r in trouble
Pros
Cons
Best Uses
I have no idea how well this stuff works compared to other glues. Time will tell. I've only had my bamboo floors in for a week. My installer had no complaints...
Had to buy 3 containers and barely used any from the last one. No options to get a smaller container than 4 gallons
This glue works fantastic, really worth the money. Only down side it is hard to clean up
Pros
Cons
Best Uses
This stuff goes on thick, so make sure you trowel appropriately. I only got about 100 sqft out of the first 4 gallon container. I had to adjust my troweling to get about 120 sqft per bucket. I didn't want to have to spend more money for another one of these expensive babies.
Displaying reviews 1-10
Previous | Next »
Do you have questions about this product?
AnswerBox - Get answers from Staff Experts and real customers by clicking "Ask a question"
or click here to ask our Customer Service Team
Q:
What is the sound rating on this product?1 answer
CUSTOMER CARE
A:
Seal-n-Grip sound ratings tested with a 3/8" Hardwood Engineered Floor.Q:
Assuming one glues down a wood floor using this product to a concrete floor, how tough would it be to remove this adhesive in say 5 years?1 answer
CUSTOMER CARE
A:
Any of our adhesives will stick very hard. May I suggest you consider installing withQ:
Hi1 answer
CUSTOMER CARE
A:
Yes. Seal-N-Grip can be used to install this flooring. `Q:
so basically..I have 890 Sq ft to install flooring..the Seal n Grip is $179.99 per container. Each container will install 35 Sq Ft...if my math is right, I have a huge problem!! Flooring cost $2000...890 divided by 35 and get 25.5, multiply this number by cost and get, $4589.75 plus tax for the Glue...is this correct?1 answer
CUSTOMER CARE
A:
35 square feet per gallon. 1 container is 5 gallons.Q:
How many squarefoot 4 gallons of morning star glue can cover?1 answer
A:
Thank you for writing in! I would be glad to help you with your questions.Q:
Is this glue recommended for glue down cork tiles?1 answer
CUSTOMER CARE
A:
No. The manufacturer recommends a Latex Water Base Contact Cement adhesive for cork tiles.Q:
How much adhevise do i need for each sq ft of hardwood flooring?1 answer
CUSTOMER CARE
A:
1/4” x 3/16” V-NotchQ:
What is the acceptable moisture level for concrete to apply this product ? I read on the Morning Star Installation Guide for Strand Bamboo that the ideal moisture range within the new bamboo flooring is 6%-12%. What does this mean ? At some other sites they say the emission of moisture vapor from the (concrete) floor shall not be more than 3.0 pounds per 1,000 square feet per 24 hours.1 answer
A:
Thank you for writing in!Q:
Every How To Video Says "DONT INSTALL SOLID HARDWOODS OVER CONCRETE" Even the info signs at other home improvemetns stores have SOLID marked as NOT APPLICABLE when applying to concrete sub, So my question is.....We were sold your Morning Star Strand Qing Scorpion 3-3/4" x 5/8" Bamboo Floor and told the 5 in 1 seal n grip will allow us to install this over concrete. Please advise1 answer
A:
Yes you can!Q:
We plan to install Bellawood 3/8" Brazilian Cherry solid wood on concrete floor. How do we choose between Bostik Seal-n-grip and Bostik Best?1 answer
A:
I would recommend the Bostk Seal-n-grip for this application over concrete as it has a built in moisture barrier.
