Major Brand  3/4 x 3-1/2" Brazilian Cherry

A:

Unfortunately I do not have all of the information on this product since it is a special buy. I would ask that you contact our sales dept. for more detailed information. There number is (800) 476-0007 Thank you for your inquiry.

A:

Unfortunately I do not have all of the information on this product since it is a special buy. I would ask that you contact our sales dept. for more detailed information. There number is (800) 476-0007 Thank you for your inquiry.

A:

Copied from this product page:
3/4" x 3-1/2" Brazilian Cherry Stained Prefinished Solid Hardwood Flooring

Brazilian Cherry is one of our most popular woods and well known for its rich color, hardness, and durability.
It is an excellent choice for both residential and commercial use. As the color deepens with age it becomes even more stunning making it the perfect choice for any space. Brazilian Cherry may show a myriad of hues from golden brown to reddish brown.
As the floor ages, white mineral deposits may occur.
Please note Brazilian Cherry must not be installed with radiant heating systems.

A:

Unfortunately I do not have all of the information on this product since it is a special buy. I would ask that you contact our sales dept. for more detailed information. There number is (800) 476-0007 Thank you for your inquiry.

A:

Our Bellawood based on the finish if you are interested in a solid, if you are more interested in bamboo you want a strand bamboo as it is the hardest in the bamboo line - even harder than some of our exotic materials.

A:

Acclimation: All wood products are affected by environmental conditions, especially prefinished materials.
To control wood movement- expansion or shrinkage- it is recommended to acclimate the new flooring in the areas to be installed, not in (garages, U-Haul trailers, sheds, or tents) to normal lived-in conditions while in the boxes. If the products are protected in plastic then open the ends of the boxes. Length of time is not the determining factor. The goal of acclimation is for the core of the product to reach an equilibrium or moisture balance of the new flooring with its surroundings before installation or fastening. This balance could be achieved in as little as 1 to 5 days, or longer for some dense or oily exotic species.
Avoid shocking the floor.
Just like you, wood actually performs best with consistent indoor temperatures of 60°-80° F and indoor humidity levels of 30% - 50%. Very dry or humid regions of the country usually require extended conditioning. Maintaining the recommended acclimation levels even after the installation should be viewed as ongoing floor care. Your doing so will help to minimize board movement, excessive squeaks, finish cracking and gaps.
Hygrometers sold in most Target and Wal-Mart stores ($10-$45) can be used to easily identify the need to regulate the humidity or air moisture.
In addition, to prevent board warping or bowing, do not cut the plastic support bindings on the outside of the packaging until ready to install. Store products flat, in a dry place. Provide air flow under and around cartons. Do not store directly on bare concrete or next to outside walls. Cartons should be placed as close to the center of the installation area as possible.
Proper jobsite conditions, acclimation and moisture testing of the subfloor along with the new flooring all works together for the success of the installation and is the responsibility of those overseeing the project.
A vapor barrier is needed to protect the new flooring against moisture or moisture vapor.
Thank you for writing in.

A:

Prefinished flooring should never be used outside as urethane finish will crack. Unfinished hardwood finished with natural penetrating oils like Waterlox may be used.

A:

This flooring will come in random lengths, and can range from 8" to possibly 60" or longer, this is a major brand product so I apologize for the specifications not being readily available.

A:

This product does come with a micro beveled edge as will all of our prefinished floors