Artisan Reserve
Bellawood Matte Hardwood Flooring
New Bamboo Assortment
Hardwood Flooring
Laminate Flooring
Vinyl Flooring
Wood Plank Tile
Cork Flooring
Waterproof Flooring
Distressed Flooring
Flooring Moldings, Stairs, Trim and Accessories
Reserve your catalog now!
Helpful Links

Major Brand 3/4" x 3-1/4" Cinnamon Maple Utility Shorts

SKU: 10035087
Compare to anyone!
Guaranteed low price!
Our Low Price $2.29/sq. ft.
Special Price $1.59/sq. ft.
Available in select stores nationwide. Currently not available for online purchase. Check with your local store.
Customer Rating


3/4" x 3-1/4" Cinnamon Maple Utility Shorts - 5 Yr Warranty

Our Clearance items are up to 70% off retail!

A birthday cake without frosting?
That's a floor without matching trim and molding!
Click here to find our extensive selection of natural & stained trims and moldings so that you can match wood species to your new floor.
(Who else can do that?)

We caught up with real Lumber Liquidators' customers who volunteered to discuss their floor shopping, buying and installation experiences. In no way did these customers receive compensation for their kind words. (They're speaking straight from the heart.)

Lumber Liquidator$... No one else has hardwood flooring for less!


  • Brand:  Major Brand
  • FLOORING SKU:  10035087
  • SAMPLE SKU:  10035088
  • Limited Warranty:  5 years finish warranty
  • Trade Name:  Maple
  • Marketing Name:  Maple
  • Janka Rating:  N/A
  • AC Rating:  N/A
  • Grade:  Utility
  • Color Shade:  Medium
  • Width:  3 1/4"
  • Thickness:  3/4"
  • Construction:  Solid
  • Installation Type:  Glue, Nail
  • Sq. Ft. Per Box:  21.2
  • Hardness Rating:  N/A
  • Waste:  10%
  • Weight per box/unit:  66.44
  • Installation Details:  N/A

  • Click to download Adobe Reader

Do you have questions about this product?

AnswerBox - Get answers from Staff Experts and real customers by clicking "Ask a question" or click here to ask our Customer Service Team

4 Questions | 4 Answers
Displaying questions 1-4
  • Q:

    Can I install this floor on a concrete radiant heat?
    Asked on 9/26/2015 by Ralph the newbie from Pennsylvania

    1 answer

    • Staff Reviewer


      No we do not recommend any of our solid products over radiant heat. Below are some suggestions for your installation project.
      Lumber Liquidators recommends floating floors -flooring not attached to the subfloor- for radiant heat applications. To ensure performance, the consumer should be aware of risks associated with nailing or gluing solid wood over radiant heat and ensure product selection and installation practices are appropriate for the application. If you choose to use solid wood, select quarter-sawn or rift-sawn materials. Note that even using solid wood species with known positive dimensional *stability characteristics than others, cannot predictably be guaranteed to perform well in every application. In addition, radiant systems if not monitored and controlled properly can negatively impact the long term finish performance of wood flooring and may result in finish chipping, peeling or hazy finish.

      Here are the recommended choices for in-floor heating:

      Floating floors - Most recommended because these types of floorings are installed over an underlayment and not attached or fixed to the subfloor. The flooring is free to move as a total unit to better accommodate subfloor movement and environmental fluctuations (moisture and temperature).

      Engineered flooring –Works well over radiant heat because its unique plywood construction creates greater stability as each wood layer is positioned perpendicular to the other thereby resisting movement from environmental fluctuations (Depending on the selection can be nailed, glued or floated over the subflooring). If choosing engineered flooring for a radiant heat application, the consumer is advised to select a product constructed using a relatively stable wood species on the top surface. Consult your local Lumber Liquidators store or customer care for assistance if needed.

      Quarter-sawn or rift-sawn – This cut or style of solid wood flooring is most preferable because it tends to expand more upwards in the direction of the grain with less side to side movement common with plain-sawn cut flooring. In addition, quarter-sawn solid flooring reduces the likelihood of side gapping and board edge cupping due to environmental fluctuations.

      Strip flooring; boards 3" wide and less – Selecting a flooring product in a width measuring 3" or less is a better choice than planks or wider flooring because narrow boards will allow more board movement and will expand and contract less under varying environmental conditions when compared to wider boards. As a general rule, wider boards can have wider side or seam gaps.

      Radiant Tips- Because of the wide array of radiant heat systems on the market, each with its own features, please consult with your radiant heat provider for recommended installation methods. Newly installed systems should be operating some two weeks prior to wood flooring installations. This precaution helps to further dry out any unknown pockets of trapped moisture. Hydronic systems must include in-floor temperature sensors and an outdoor thermostat that allows the system to adjust the water temperature according to anticipated heat loss. Radiant heat contributes to the drying out of all woods. Make sure the board moisture content is approximately 6-9% before and maintained well after installation. The use of a humidification system may be required to maintain the proper humidity level. The indoor relative humidity must be maintained between 30-50% year round. Failure to do so can result in edge cupping, squeaking, delamination, splintering, or face checking. During installation, reduce thermostat to 65°F. 48 hours after installation, slowly raise the temperature of the heating system to its preferred operating level over a period of 5 days. The surface temperature of the subfloor must never exceed 85°F in any location. Aviod shock to the floor, the temperature setting must always remain within 15°F of normal operating level, adjusted gradually and should never be turned completely off. Excessive heat, rapid heating, and/or failure to maintain humidity levels between 30% and 50% is likely to result in cracking, cupping, squeaking and other forms of floor issues. Small surface splits (checking), particularly at the ends of planks, should be expected with installations over radiant heat and does not constitute a product failure.

      *Wood stability refers to predictable movement that can be expected in a given wood species after installation once in service. Note that even when using an ideal species for radiant applications actual wood performance can still vary due to the radiant system construction, it operation and installation techniques.
      Thank you for your inquiry

      Answered on 9/26/2015 by cc-3
  • Q:

    Where is this flooring made?
    Asked on 9/22/2015 by Sue

    1 answer

    • Staff Reviewer


      This is a product of the USA.
      Thank you for writing in!

      Answered on 9/23/2015 by cc-2
  • Q:

    Roughly, what are the lenghts of the pieces in a box of flooring?
    Asked on 11/7/2014 by swilly from mansfield, ohio

    1 answer



      Shorts are made up of 36" and smaller lengths.

      Tavern or Utility Grade

      SUMMARY: Tavern Grade flooring will contain significant variations in wood coloration and character; however, such imperfections should still provide a serviceable floor. Tavern grade has the lowest average board length of all standard wood grades.
      DETAILED: Tavern grade flooring will admit a limited amount of unfilled and unfinished open characters including open knots, splits, or cracks. Severely mis-manufactured boards, shattered or rotten ends, pieces with less than ¼tongue, or other unsound defects of a similar nature are typically not permitted. Tavern grade pre-finished flooring will contain a limited amount of pieces with finish irregularities including, but not limited to: bubbles, finish skips or lines, severe streaks, stain/color variation, surface handling scratches, and grainy surface/debris. When assembled, Tavern grade flooring may exhibit gapping that exceeds 0.031”and end/side over-wood(e.g. height variation between adjacent boards) that exceeds 0.030”.

      Answered on 11/10/2014 by Tech & Install
  • Q:

    I live in a manufactured home and would like to have hardwood floors. Can I put hardwood on top of particle board? I don't know what is required for installing hardwood.
    Asked on 11/5/2014 by Cathy from Brush Prairie, WA

    1 answer



      Floating floors are ideal for Mobile Homes for two reasons.

      1st, The base sub-floor of these homes are prone to movement or future sagging.

      2nd, The sub-floors are usually made of a Particle type board, a high quality board though not designed for a lasting nail-hold of traditional nail-down Hardwood floorings

      The advantages of installing floating floors, such as engineered wood or laminates is that it’s not attached to the sub-floor. Therefore the new floor will not be affected by the sub-floor’s movement, and are less expensive to install by not having to remove the base floor.

      However, a more traditional Hardwood nail-down installation can be accomplished if the Mobile home has a permanent, fixed foundation. In addition, for a lasting nail hold, any inferior sub-floorings should be removed or resurfaced using a minimum 5/8” plywood, 23/32” AdvanTech or 23/32” OSB (Oriented Strand Board) Particle board is only sufficient for floating floors.

      Answered on 11/7/2014 by Tech & Install
Displaying questions 1-4

Do you have a question about this product? 

Quality Guarantee

NO formaldehyde is used in the manufacturing
or construction of this flooring.

Click to learn more