Exmore EX3 Pro Adhesive + Moisture-Control 4 Gallons
EXMORE EX3 Pro Adhesive + Moisture-Control - 4 gallons
Introducing EXMORE Wood Flooring Adhesives. Only at Lumber Liquidators! Made from rapidly renewable raw materials, Exmore urethane adhesives feature a 100% solid formulation and provide superior bond strength with low oder and extremely low VOC content.
Exmore EX3 Pro + Premium Moisture-Control, Sound-Reduction, and Wood Flooring Adhesive provides superior bond and moisture vapor emission control up to 15lbs MVER or 85% RH.
Do you have questions about this product?
AnswerBox - Get answers from Staff Experts and real customers by clicking "Ask a question" or click here to ask our Customer Service Team
Q:can you glue engineered wood on ceramic tile
A:For complete product information; Please go to our Website @ LumberLiquidators.com and at the bottom of the page click on Flooring 101, enter –Exmore EX3 Adhesives TDS - , enter, then click on the PDF to open. Thank you for your inquiry.
Q:Will this work on Tarkett Nafco floors? It needs to be heat releasable and moisture resistance on concrete floor
A:This adhesive is for gluing down wood products only.
Q:Can this be used over 1/2" MDF
A:Unfortunately not recommended,
Q:Is this water-based?
A:Not water-based, It is a urethane-based adhesive.
Q:Is EXP3 suitable for a Bamboo flooing adhesive on Ply floor base?
A:Yes it is suitible.
Q:I followed the instructions for removing glue off of the flooring. However after the mineral spirits dry I still have smudge marks. How to I remove the smudge marks?
A:Here’s something you can try! (Always test on scrap board or in an inconspicuous area first).
Q:What mastic would you recommend for a parquet floor
A:It always depends on what subfloor you are installing over, check with your parquet manufacturer for their recommendations.
Q:What is the coverage for the EXPro+?
A:Coverage per 4 U.S. gals.
Q:how long does it take "glue" used to attach Bellawood engineered floor to a 41 year old at grade concrete slab to set up? The question has to do with offgassing. How long will it "smell"?
A:This moisture cured urethane adhesive sets up in 10-12 hours.