|
4" x10" FWF PR Bamboo Grill |
|
|
|
|
PRBAMGR410HN - PR Bamboo Grill 4X10 FWF Horizontal Natural Fits 5/8 Standard Vent- Flush Mount Grill See our article on Hardwood Grill/Vent covers in Flooring 101 for information on measurement. Please note the nominal thickness of the wood and bamboo (not laminate) grills is 5/8". It can be used with any floor that thick or thicker, but not thinner. |
REVIEW SNAPSHOT®
by PowerReviews(based on 4 reviews)
Ratings Distribution
100%
of respondents would recommend this to a friend.
Pros
Cons
Best Uses
Reviewed by 4 customers
Sort by
Displaying reviews 1-4
Pros
Cons
Best Uses
Comments about 4" x10" FWF PR Bamboo Grill:
We have used this product previously when we installed another bedroom floor. The design has changed, but the concept remained the same. The register and frame work well with 5/8 bamboo and provide a smooth solid floor look that is easy to clean.
Pros
Cons
Best Uses
Comments about 4" x10" FWF PR Bamboo Grill:
Had to sand down to remove the varnish from this natural bamboo grill, and then stain and varnish to match "cherry" stained bamboo flooring. Was only thing avaialable unless I wanted to pay $80 each for custom stained version.
Bottom Line Yes, I would recommend this to a friend
Images shared by molly
Stained grill
Was this review helpful? Yes / No
- You may also flag this review
Pros
Cons
Best Uses
Comments about 4" x10" FWF PR Bamboo Grill:
nothing to add
Pros
Cons
Best Uses
Comments about 4" x10" FWF PR Bamboo Grill:
This is one of the coolest things I've ever seen! I knew when I saw it our floor wouldn't be complete without it. Totally worth the cost and added time to install just right. Will be putting in for all hardwood floor remodels.
Bottom Line Yes, I would recommend this to a friend
Images shared by John & Khristen
Images shared by John & Khristen
(1 of 1 customers found this review helpful)
Was this review helpful? Yes / No
- You may also flag this review
Displaying reviews 1-4
Do you have questions about this product?
AnswerBox - Get answers from Staff Experts and real customers by clicking "Ask a question"
or click here to ask our Customer Service Team
Q:
how do you installed laminated floor on to the stairs?1 answer
A:
Where do I find installation instructions / product warranty information?Q:
I am using carpet tiles on wood sub-floor stairs, will this nosing work in this application?1 answer
CUSTOMER CARE
A:
Considered experimental and can't be recommended.Q:
Can Dream Home Colma Maple be used on stairs? If so, how do I ensure the stair nosing and subfloor/cork underlayment all blend for a beautiful, squeak-free stair? This installation is in a townhouse condominium.1 answer
A:
Yes, The Dream Home Colma Maple could be glued down the plywood stair tread and risers using a urethane wood adhesive. The cork underlayment should not be used on a stair case installation. The stair nosing can be glued with our Bostik Best tube adhesive and screwed down with wood screws, to the front of the tread. You should pre-drill and counter sink the holes before setting the screws in place. Fill hole with matching latex wood filler. The stair nosing will over lap the laminate.
