4" x 10" Golden Teak Prefinished Flush Grill
|We offer Grills/Grates in a wide array of species to coordinate with most of our floors. Prefinished or unfinished, drop-in styles or installed flush with the floor, 4?x 10? and 4? x 12?, plus customsizes are available!|
Reviewed by 2 customers
Displaying reviews 1-2
The flooring is great. The installers found the flooring was good to work with.
Looks great! [...]
Do you have questions about this product?
AnswerBox - Get answers from Staff Experts and real customers by clicking "Ask a question" or click here to ask our Customer Service Team
Q:Would you recommend using this 3/4" x 3-1/4" Hickory by R.L. Colston for installation over a Warmboard hydronic radiant heating system?
Q:Can this flooring be oiled, rather than stained? If so, what type of oil is recommended?
A:Yes it can be oiled, we unfortunately do not sell finishes for flooring.
Q:Is this flooring Tongue and Grooved on the ends as well?
A:Yes it is.
Q:Can this hickory flooring be glued instead of nailed?
A:This is a solid 3/4" product designed to be nailed to a wood substrate.
Q:How are the widths measured? On a board 3-1/4" like this, what is the face width? Is it 3" of flat surface width plus 1/4" to 3/8" of tongue? Can you measure a piece of 3/4 x 3-1/4" flooring? I want it for something other than flooring and need to rip/saw the tongue off and maybe the groove too, and need to know actual widths to determine what dimensions I will end up with. Thanks.
A:It's face is 3-1/4" Wide (not including the tongue).
Q:what does 1 box 22.75SF of hickory weigh?
A:Each box of the RL Colston Hickory weights 69 lbs. Please feel free to contact our product specialists at 1-800-476-0007 with any additional questions or to further discuss your project. Thank you for your inquiry.
Q:What does it mean, "square edge?" I didn't notice it mentioned for other flooring you sell. I'm actually looking for something without a tongue & groove if I can find it here.
A:This is an unfinished tongue and groove floor. Only prefinished floors have a micro-bevel.
Q:What subfloor is needed? Can this be placed over particle board or on a below-grade cement floor?
A:Minimum 5/8" plywood. This solid 3/4" product is not recommended to be nailed over particle board (no holding power) and the only way to install this in a below grade application is to use our Elastilon underlayment.
Q:does this product have a tongue and groove?
A:Yes it does.
Q:What would be the longest and shortest lengths in a bundle. Im thinking of using it for cabinet door and facing
A:This product comes in random lengths 1' to 7' with the average board measuring about 2 1/2'