Classic Gunstock- SUMMARY: Natural Grade flooring contains distinct variations in coloration and varying wood characters. Natural grade flooring will have a slightly longer average plank length compared to Rustic grade products.
DETAILED: Specific characteristics of Natural grade flooring will vary widely by wood species; however, typically include such things as: minor imperfections in milling; imperfections in face-work which cannot be wholly removed by an ordinary method of sanding; slight variations in angle of end matching; varying wood characteristics such as spots, streaks, slightly open checks, and pin/worm holes; small splits, broken knots or knot holes; and shallow back. Natural grade pre-finished flooring will have a plank face that is free of most finishing imperfections; however, may contain a limited amount of minor blemishes including, but not limited to: light grainy surface/debris, bubbles, streaks, uncoated bevel, finish chipping, dents, or equivalent type characters. When assembled, Natural grade flooring should not exhibit gaps exceeding 0.031”or end/side over-wood(e.g. height variation between adjacent planks) exceeding 0.030”.
SUMMARY: The purpose of Rustic grade flooring is to produce a floor suitable for homes, general utility use, or where character marks and contrasting appearance is desired. Rustic grade flooring has a lower average plank length than Natural grade flooring.When purchasing this grade be sure to add 10% -20% to complete the project.
DETAILED: Rustic Grade flooring may contain all natural variations in coloration and sound wood characters except severe defects such as: shattered or rotten ends, badly split ends, shake, advanced rot, or severe milling imperfections which would materially impair the serviceability of the floor. Knot holes and open characters which can be readily filled are admitted. Rustic grade pre-finished flooring may have a plank face that contains a limited amount of finishing imperfections including, but not limited to: light/moderate grainy surface, debris, streaks, uncoated bevel, dents/ scratches, lipped ends, or orange peel/ropey finish. Finish skips are not permitted. When assembled, Rustic grade flooring should not exhibit gaps exceeding 0.031”or end/side over-wood(e.g. height variation between adjacent boards) exceeding 0.030”.
Thank you for your inquiry
Answered on 6/13/2014 by cc-3