|
|
Mapei Mapei Ultrabond 905 Urethane Adhesive 10.1oz |
|
|
Mapei Ultrabond 905 Urethane Adhesive- 10.1oz Cartridge Ultrabond 905 is a fast-curing, moisture-cured urethane gun-grade general purpose construction adhesive suitable for use in both interior and exterior applications.
|
Reviewed by 7 customers
Sort by
Displaying reviews 1-7
Pros
Cons
Best Uses
had four tubes for a project. One worked great. The other three all had the bottoms stuck to the sides of the tube and would not move down the tube. Broke my small caulk gun when the tube collapsed on itself. Had to go buy a heavy duty caulk gun just to use. Had a side blow out on one tube due to tube bottoms being stuck to the sides. The other two just folded in on themselves.
Pros
Cons
Best Uses
u
used it for molding.had to cut tube open and use a brush
I bought 4 tubes. The first tube worked in an outstanding manner. I was sure I could finish the job in the next 20 minutes. However, the other 3 tubes all clogged very shortly after I put them in the caulking gun. I squeezed my calking gun so hard that the handle broke off. Lumber Liquidators did refund my money. I would recommend using this glue. When it works, it is just as advertised. But next time, I will squeeze the tube to see if it is still soft inside before purchasing.
Adhesive oozes so much it is very difficult for any level of precision placement. What happened many times is the adhesive would go to the placed needed, and then everywhere else around it.
Pros
Cons
Best Uses
Works great. No problems.
Pros
Cons
Best Uses
I'm buying all the stuff for the floors for my new house, so I'm the one being asked for theses reviews, but the installers are ones using it, so I have to ask them if they like it. The answer was "yea, it's great" The floors are mainly in on the first floor & they are beautiful!
Pros
Cons
Best Uses
The product worked well. Make sure to read directions. I didn't follow the have skin covered and it is hard to remove. Clean up is easy damp cloth when wet and mineral spirits when dry. I would recomend this product although it is more expensive than similar products.
Displaying reviews 1-7
Do you have questions about this product?
AnswerBox - Get answers from Staff Experts and real customers by clicking "Ask a question"
or click here to ask our Customer Service Team
Q:
How do you clean adhesive residue off laminate1 answer
CUSTOMER CARE
A:
For this adhesive use Mapei Ultrabond Urethane Cleaner or Bostik Ultimate Adhesive Remover. Find here -http://www.lumberliquidators.com/ll/s/adhesivesQ:
can i use this adhesive to install my wood stair treads1 answer
CUSTOMER CARE
A:
Absolutely yes. For safety, stair parts should be both nailed and glued. Nails can be predrilled, countersunk and holes filled with matching filler.Q:
Does the product have UV screeners to hold up if used in direct sun?1 answer
CUSTOMER CARE
A:
UV exposure is irrelevant as there is no application where adhesive would be exposed to direct sun. It will take the heat from use under flooring.Q:
how many tubes to do 200 sq ft? Can turpentine be used to take it off hands?1 answer
A:
This puts down a bead of adhesive and is not sold to glue down an entire job.Q:
does this product dry clear1 answer
A:
No it is an opaque light-tan color.Q:
what is it use for1 answer
A:
This is a 100% construction adhesive (glue).Q:
Can this adhesive be used to adhere quarter round to brick?1 answer
A:
Yes it could but does not have a "quick" grab property.Q:
how fast will it dry1 answer
A:
Initial cure will be 2 to 4 hours. Minimize light traffic for 12 hours and heavy traffic for 24 hours.Q:
To glue together ends of tongue-and-groove floated stranded bamboo, should i use this of the bostik product?1 answer
A:
If the tongue-and-groove stranded bamboo is not designed for floating (clic together) neither.Q:
can i use to install laminate floor top of ceramic tile?1 answer
A:
Unfortunately not, lamiantes do not get glued down, but are designed to float over most substrates.