|
Builder's Pride 3/4" x 3-1/4" Maple |
|
|
|
|
Builder's Pride by Dura-Wood brings the beauty of a solid pre-finished hardwood floor to your home by revealing the natural color and tones of the wood without the mess of sanding dust or finishing odors. Maple floors are exceptionally beautiful, fine-textured, tough and dent resistant. The heartwood has creamy white color tones to light reddish brown, and sapwood is a pale creamy white. What is "Select" Grade? Don't forget the molding and stair treads!
|
Please click here to download Adobe Reader. |
REVIEW SNAPSHOT®
by PowerReviews(based on 15 reviews)
Ratings Distribution
93%
of respondents would recommend this to a friend.
Reviewed by 15 customers
Sort by
Displaying reviews 1-10
Previous | Next »
Pros
Cons
Best Uses
Comments about Builder's Pride 3/4" x 3-1/4" Maple:
This floor went down on my main residential floor approx. 500 sq ft. Was easy to lay out, and install. Loved the consistency of the dimensions from box to box. Finish was also consistent. Final product was terrific. Very happy to use it. Would definitely use it again.
Bottom Line Yes, I would recommend this to a friend
Images shared by Big bob
Living room finished
Images shared by Big bob
almost done!
Was this review helpful? Yes / No
- You may also flag this review
Pros
Cons
Best Uses
Comments about Builder's Pride 3/4" x 3-1/4" Maple:
The overall finished product looks good. However, I was disappointed in the height differences from board to board. I thought they would be more consistent. Even with the bevel, it is clear that many boards next to each other are a different height.
Pros
Cons
Best Uses
Comments about Builder's Pride 3/4" x 3-1/4" Maple:
Remind contractor that not all pieces are the same width (it will create slight gaps). Remind contractor that it dents easily so PLEASE be careful and don't drop things on it!
Service and delivery comments:
Delivery prompt
Pros
Cons
Best Uses
Comments about Builder's Pride 3/4" x 3-1/4" Maple:
During my previous installation of 10 boxes, I found there was a lot of variation in board width. After realizing the problem, I had to separate the boards into 3 different width groups. Once matched, the boards could be installed with less gaps. That part of the floor looked great but you shouldn't have to match boards to get them too look good
Pros
Cons
Best Uses
Comments about Builder's Pride 3/4" x 3-1/4" Maple:
I just had my entire kitchen redone and replaced my old ripped vinyl floor with hardwoods. The room looks twice as big. I love the look so much, I am planning to take out the carpet and continue the hardwoods in my living room and hall.
Bottom Line Yes, I would recommend this to a friend
Images shared by Cindy
My old floor
Images shared by Cindy
My new hardwoods
(1 of 1 customers found this review helpful)
Was this review helpful? Yes / No
- You may also flag this review
Pros
Cons
Best Uses
Comments about Builder's Pride 3/4" x 3-1/4" Maple:
[...]
Pros
Cons
Best Uses
Comments about Builder's Pride 3/4" x 3-1/4" Maple:
I gave this an average rating because it is Average grade, cuts,price, and finish.
The floor has alot various tones of maple wood. Several boxes had real dark maple which ended up in bedroom closets.
The installation went smooth, just watch your end cuts and warpage. I had alot of poor end cuts with this order.
I installed the floor in bedrooms and family room.
PROS:
The floor looks great throughout, I personally like the various tones of maple. Getting rid of the carpet has helped allergies alot. Cleaning is easy with a duster.
Get the quality underlayment!!!!!
CONS:
Hardwoods will scratch- pads on furniture and rover will help.
Some shrinkage in wood, would recommend letting sit at room temp/humdity a little longer than the 10 days I did. Only negative comment I received from others was various tones.
This floor turned out good and was in my budget. Wish i could have stepped up to the bella select, but thats life.
Bottom Line Yes, I would recommend this to a friend
Images shared by Sailor
living room
Images shared by Sailor
small bedroom
Was this review helpful? Yes / No
- You may also flag this review
Pros
Cons
Best Uses
Comments about Builder's Pride 3/4" x 3-1/4" Maple:
Great product!
Comments about Builder's Pride 3/4" x 3-1/4" Maple:
I bought this wood to go in my little condo and it looks absolutely perfect. The lightness of the wood (with it's wonderful maple contrasts) makes my home look larger and it's nice to walk on. [...]
Pros
Cons
Best Uses
Comments about Builder's Pride 3/4" x 3-1/4" Maple:
The quality of the wood made the install easy and it really looks good. If you are going for a clean light look, use this
Displaying reviews 1-10
Previous | Next »
Do you have questions about this product?
AnswerBox - Get answers from Staff Experts and real customers by clicking "Ask a question"
or click here to ask our Customer Service Team
Q:
What is the suggested method for cleaning the flooring?1 answer
A:
We can only recommend our Bellawood Floor Cleaner, or cleaners that are safe for water based urethane finishes. Never use any polish, wax, oil soaps or cleaners that add shine to the floor.Q:
How long after installation does it have to sit/settle before putting furniture in place?1 answer
A:
No need to wait for this nail down product.Q:
Is this wood grown in the USA? How does the Builder's Pride brand compare with the Bellawood? What is the average length of the wood pieces? What is the shortest length and how many really short pieces (12" or less) are in each box? Thank you.1 answer
A:
This material is grown in the US, the Builders Pride does not have as many coats of finish as the Bellawood does and the Bellawood will come with a 100 year transferable warranty. The boards will range from 12" to 72" and each box will vary with boards of different lengths, we have no way of knowing how many of each length will be in each box, sorryQ:
What is the Tabor rating on the finish? Is this flooring FSC certified?1 answer
A:
Minimum 550 cycles.Q:
We are installing this in our kitchen,entry way and dining room. We have MDF board in the dining room. Lineoleum in kitchen. We have to make rooms even. What would you suggest for underlayment. Plywood first, then felt? No moisture issues.1 answer
A:
Yes, 1/2" minimum ply wood (CDX) then 15 lb roofing felt.Q:
Is this product suitable for concrete base underneath? Can it be glued onto contrete or do I need to install plywood in between the contrete and the wood flooring. I'm installing on a 3rd floor room, not the basement, so should moisture be a concern? Do you recommend I buy your engineered wood flooring product instead of this for installing and glueing on concrete. Thanks.1 answer
A:
Please call our Tech and Install Department @ (800) 366-4204 for a detailed response to this question. |
 | |||||||
| CUSTOMER SERVICE Customer Care Contact Us Order Status Privacy & Security Terms & Conditions Shipping & Returns Technical Problems? International Support Ask Our In-House Installers Email Tom Sullivan |
SERVICES Flooring 101 The Floor Finder Request A Catalog Get Our Email Deals Lumber Liquidators Credit Professional Installation We Buy Closeouts Become an Affiliate UK Residents Dura Dance Floors ProSales |
HELPFUL INFORMATION About Us Investor Relations Real Estate Employment Opportunities Flooring Videos Customer Reviews Before & After Gallery Supporting the Community Global Responsibility As Seen On Site Map | QUICK LINKS Not Sure? Start Here Room Designer Store Locator Weekly Sale Overstocks New Arrivals Lumber Liquidators Blog Floor Finder App LumberLiquidators.ca En Español FOLLOW US
| |||||
