Swatch Shadow
repbanner
 
1-800-HARDWOOD (1-800-427-3966)   |  Customer Care   |  En Español   
Log In   |   My Account   |  Shopping Cart   |  Order Status  
BELLAWOOD Natural 3/4"x3 1/4" Australian Cypress Callitris Columellaris 1375 Clear Finish Solid

BELLAWOOD  3/4" x 3-1/4" Natural Australian Cypress

BELLAWOOD Natural 3/4"x3 1/4" Australian Cypress Callitris Columellaris 1375 Clear Finish Solid
Customer Rating


SKU: 10034376
Comparable Price $8.79/sq. ft.
Our Low Price $7.09/sq. ft.
Special Price $6.79/sq. ft.
Save up to $2.00/sq. ft. (23%)
Your Square Feet:


Check Measurement

22.75 sq. ft. per box
$154.48 each
Your Material Cost:


Add To Cart
Not sure it's the one? Order a sample! Add Sample
Add this product to your wish list   Add to Wish List

BELLAWOOD
3/4" x 3-1/4" Natural Australian Cypress
Clear Finish  Natural

This item was successfully added to your cart.
Continue Shopping

Checkout Now


BELLAWOOD 3/4" x 3-1/4" Natural Australian Cypress Prefinished Solid Hardwood Flooring

We Redefined Quality, Again. We set the quality standard by introducing a groundbreaking finish so tough it allowed us to offer one of the first 50 year warranties. Others followed. So, we raised the bar again. Now Bellawood is backed by a Certified 100 Year Transferable Warranty that covers you and generations to come.

Unique and durable, Australian Cypress is a stunning wood with a variety of tones, ranging from cream to honey brown. Its intricate grain and exquisite dark knots make it a great choice when you want to create a rustic feel. As for hardness and durability, Australian Cypress is renowned.  It suits virtually any high-traffic area?from busy  living room to bustling boardroom.

DIY Blog Cabin

As Seen on TV:  DIY Blog Cabin

About "Natural Grade" Flooring:
Natural Grade flooring has some color variation, mineral coloring and small knots. It can also be referred to as #2  or Third Grade. Natural grade flooring will have a slightly longer average plank length compared to Rustic grade products.

This product is proudly finished in the USA.

It Taber Tested "the Best." When subjected to the industry sandpaper abrasion test, known as Taber Testing, Bellawood's durability results were more than double most comparably priced floors. There's good, there's better?and then there's Bellawood.

 


QUALITY GUARANTEE: NO formaldehyde is used in the manufacturing or construction of this flooring.

You may need:
Molding &
Trim
4" x 12" Bellawood Australian Cypress Drop In Grill   Clear Finish
Comparable Price $85.49/EA
Our Low Price $56.99/EA
Add To Cart
Qty:  

Add To Cart
4" x 10" Bellawood Australian Cypress Drop In Grill   Clear Finish
Comparable Price $80.99/EA
Our Low Price $53.99/EA
Add To Cart
Qty:  

Add To Cart
2" x 12" Bellawood Australian Cypress Drop In Grill   Clear Finish
Comparable Price $71.99/EA
Our Low Price $47.99/EA
Add To Cart
Qty:  

Add To Cart
2" x 10" Bellawood Australian Cypress Drop In Grill   Clear Finish
Comparable Price $65.99/EA
Our Low Price $43.99/EA
Add To Cart
Qty:  

Add To Cart
1/2" x 3/4" x 78" Australian Cypress Shoe Molding   Clear Finish
Comparable Price $22.49/LFT
Our Low Price $3.99/LFT
Add To Cart
Qty:  

Add To Cart
1/4" x 2" x 78" Australian Cypress T-molding   Clear Finish
Comparable Price $13.49/LFT
Our Low Price $8.99/LFT
Add To Cart
Qty:  

Add To Cart
5/8" x 2" x 78" Australian Cypress Threshold   Clear Finish
Comparable Price $14.89/LFT
Our Low Price $9.89/LFT
Add To Cart
Qty:  

Add To Cart
3/4" x 3-1/8" x 78" Australian Cypress Stair Nose   Clear Finish
Comparable Price $22.49/LFT
Our Low Price $14.99/LFT
Add To Cart
Qty:  

Add To Cart
3/4" x 2-1/4" x 78" Australian Cypress Reducer   Clear Finish
Comparable Price $14.99/LFT
Our Low Price $9.99/LFT
Add To Cart
Qty:  

Add To Cart
9/16" x 7-1/4" White Primed Colonial Baseboard
Comparable Price $3.49/LFT
Our Low Price $2.29/LFT
Add To Cart
Qty:  

Add To Cart
White Primed Colonial Baseboard 9/16" x 5-1/4"
Comparable Price $3.99/LFT
Our Low Price $1.59/LFT
Add To Cart
Qty:  

Add To Cart
White Primed Shoe Molding
Comparable Price $1.19/LFT
Our Low Price $0.39/LFT
Add To Cart
Qty:  

Add To Cart
White Primed Colonial Baseboard
Comparable Price $2.99/LFT
Our Low Price $1.19/LFT
Add To Cart
Qty:  

Add To Cart
White Primed Quarter Round
Comparable Price $1.29/LFT
Our Low Price $0.54/LFT
Add To Cart
Qty:  

Add To Cart
Accessories

Mechanics Gloves Extra Large
Comparable Price $12.99/EA
Our Low Price $7.99/EA
Add To Cart
Qty:  

Add To Cart
Mechanics Gloves Large
Comparable Price $12.99/EA
Our Low Price $7.99/EA
Add To Cart
Qty:  

Add To Cart
Lumber Liquidators
Felt Pads Various Sizes 43-Pack
Comparable Price $3.99/EA
Our Low Price $0.95/EA
Add To Cart
Qty:  

Add To Cart
Lumber Liquidators
1-1/2" Heavy Duty Felt Pads 8-Pack
Comparable Price $2.99/EA
Our Low Price $0.95/EA
Add To Cart
Qty:  

Add To Cart
New Scratch Away 8oz. Bottle
Comparable Price $10.99/EA
Our Low Price $6.99/EA
Special Price $5.59/EA
Add To Cart
Qty:  

Add To Cart
Lumber Liquidators
Safety Glasses with Pouch
Comparable Price $8.99/EA
Our Low Price $1.95/EA
Special Price $0.96/EA
Add To Cart
Qty:  

Add To Cart
BELLAWOOD
Floor Care Kit
Comparable Price $39.99/EA
Our Low Price $16.95/EA
Special Price $13.56/EA
Add To Cart
Qty:  

Add To Cart
BELLAWOOD
BELLAWOOD Hardwood Floor Cleaner
Our Low Price $6.96/EA
Special Price $5.57/EA
Add To Cart
Qty:  

Add To Cart
Tools &
Maintenance
Utility Knife
Comparable Price $3.99/EA
Our Low Price $1.95/EA
Special Price $1.48/EA
Add To Cart
Qty:  

Add To Cart
Norge
Li-ON Drill/Multi-Tool Kit
Comparable Price $129.99/EA
Our Low Price $76.95/EA
Add To Cart
Qty:  

Add To Cart
Norge
Multi Tool 1.8 A Variable Speed
Comparable Price $69.99/EA
Our Low Price $44.99/EA
Add To Cart
Qty:  

Add To Cart
Underlayment &
Adhesives
Mapei
Mapei Ultrabond 905 Urethane Adhesive 10.1oz
Comparable Price $8.99/EA
Our Low Price $5.95/EA
Add To Cart
Qty:  

Add To Cart
Bostik
Bostik Best Adhesive 10oz
Comparable Price $8.99/EA
Our Low Price $5.99/EA
Add To Cart
Qty:  

Add To Cart
Eco Silent Sound HD Underlayment
Comparable Price $79.99/EA
Our Low Price $64.99/EA
Add To Cart
Qty:  

Add To Cart
BELLAWOOD
Premium Underlayment 100 Sq Ft
Comparable Price $134.99/EA
Our Low Price $89.99/EA
Add To Cart
Qty:  

Add To Cart


  • Brand:  BELLAWOOD
  • FLOORING SKU:  10034376
  • SAMPLE SKU:  10034384
  • Limited Warranty:  100 years
  • Trade Name:  Australian Cypress
  • Marketing Name:  Australian Cypress
  • Janka Rating:  1375
  • AC Rating:  N/A
  • Grade:  Natural
  • Color Shade:  Medium
  • Width:  3 1/4"
  • Thickness:  3/4"
  • Construction:  Solid
  • Installation Type:  Glue, Nail
  • Sq. Ft. Per Box:  22.75
  • Hardness Rating:  7% harder than Red Oak
  • Waste:  10%
  • Weight per box/unit:  62.83
  • Installation Details:  Installation Guide.pdf
  • Catalog Page:  BELLAWOOD Catalog Page

  • Please click here to download Adobe Reader.

Do you have questions about this product?

AnswerBox - Get answers from Staff Experts and real customers by clicking "Ask a question"

or click here to ask our Customer Service Team

34 Questions | 35 Answers
Displaying questions 1-10Previous | Next »
  • Q:

    Can this be set on infloor heat?
    Asked on 6/21/2014 by al from Harrison MI.

    1 answer

    • Staff Reviewer

      A:

      Lumber Liquidators recommends floating floors -flooring not attached to the subfloor- for radiant heat applications. To ensure performance, the consumer should be aware of risks associated with nailing or gluing solid wood over radiant heat and ensure product selection and installation practices are appropriate for the application. If you choose to use solid wood, select quarter-sawn or rift-sawn materials. Note that even using solid wood species with known positive dimensional *stability characteristics than others, cannot predictably be guaranteed to perform well in every application. In addition, radiant systems if not monitored and controlled properly can negatively impact the long term finish performance of wood flooring and may result in finish chipping, peeling or hazy finish.

      Here are the recommended choices for in-floor heating:

      Floating floors - Most recommended because these types of floorings are installed over an underlayment and not attached or fixed to the subfloor. The flooring is free to move as a total unit to better accommodate subfloor movement and environmental fluctuations (moisture and temperature).

      Engineered flooring –Works well over radiant heat because its unique plywood construction creates greater stability as each wood layer is positioned perpendicular to the other thereby resisting movement from environmental fluctuations (Depending on the selection can be nailed, glued or floated over the subflooring). If choosing engineered flooring for a radiant heat application, the consumer is advised to select a product constructed using a relatively stable wood species on the top surface. Consult your local Lumber Liquidators store or customer care for assistance if needed.

      Quarter-sawn or rift-sawn – This cut or style of solid wood flooring is most preferable because it tends to expand more upwards in the direction of the grain with less side to side movement common with plain-sawn cut flooring. In addition, quarter-sawn solid flooring reduces the likelihood of side gapping and board edge cupping due to environmental fluctuations.

      Strip flooring; boards 3” wide and less – Selecting a flooring product in a width measuring 3” or less is a better choice than planks or wider flooring because narrow boards will allow more board movement and will expand and contract less under varying environmental conditions when compared to wider boards. As a general rule, wider boards can have wider side or seam gaps.

      Radiant Tips- Because of the wide array of radiant heat systems on the market, each with its own features, please consult with your radiant heat provider for recommended installation methods. Newly installed systems should be operating some two weeks prior to wood flooring installations. This precaution helps to further dry out any unknown pockets of trapped moisture. Hydronic systems must include in-floor temperature sensors and an outdoor thermostat that allows the system to adjust the water temperature according to anticipated heat loss. Radiant heat contributes to the drying out of all woods. Make sure the board moisture content is approximately 6-9% before and maintained well after installation. The use of a humidification system may be required to maintain the proper humidity level. The indoor relative humidity must be maintained between 30-50% year round. Failure to do so can result in edge cupping, squeaking, delamination, splintering, or face checking. During installation, reduce thermostat to 65°F. 48 hours after installation, slowly raise the temperature of the heating system to its preferred operating level over a period of 5 days. The surface temperature of the subfloor must never exceed 85°F in any location. Aviod shock to the floor, the temperature setting must always remain within 15°F of normal operating level, adjusted gradually and should never be turned completely off. Excessive heat, rapid heating, and/or failure to maintain humidity levels between 30% and 50% is likely to result in cracking, cupping, squeaking and other forms of floor issues. Small surface splits (checking), particularly at the ends of planks, should be expected with installations over radiant heat and does not constitute a product failure.

      *Wood stability refers to predictable movement that can be expected in a given wood species after installation once in service. Note that even when using an ideal species for radiant applications actual wood performance can still vary due to the radiant system construction, it operation and installation techniques.
      Thank you for your inquiry

      Answered on 6/24/2014 by cc-3
  • Q:

    What is the best way to clean the Australian Cypress floor. The wood cleaners seams to leave a residue filmy look. Can I use white Vinegar, will that hurt? Any suggestions please and thank you.
    Asked on 5/24/2014 by Bine from Stoughton, MA

    1 answer

    • CUSTOMER CARE

      A:

      For general cleaning a swiffer type system works best. Not one that sprays the floor however. Lightly damp is fine but never soak or flood mop your floor. Do not use steam mops. Have a no shoes policy as much as possible. Use felt pads on all furniture. Sweep often.

      Bellawood Cleaner works well (use as directed), If sprayed directly on flooring instead of on a microfiber mop; use a clean damp rag and polish any build-up that may occur.

      In addition, Bona Kemi makes a decent hardwood flooring cleaner.

      Do not use oil-type cleaner or wax of any kind.

      Answered on 5/27/2014 by Tech & Install
  • Q:

    I live in New Mexico where humidity levels are regularly less than 15%. Will this be a problem for this type of wood flooring?
    Asked on 5/22/2014 by Mandor from Albuquerque

    1 answer

    • Staff Reviewer

      A:

      Yes we recommend the RH to between 30%-50%. Thank you for your inquiry

      Answered on 5/22/2014 by cc-3
  • Q:

    What is the janka hardness rating of this Australian Cypress product?
    Asked on 2/3/2014 by Craig from Alexandria, VA

    1 answer

    • Staff Reviewer

      A:

      Australian Cypress Janka rating is 1375. Thank you for your inquiry

      Answered on 2/5/2014 by cc-3
  • Q:

    Does this flooring have beveled edges and beveled ends or square edges?
    Asked on 10/21/2013 by Steve

    1 answer

    • CUSTOMER CARE

      A:

      Micro-bevel edges are present on all pre-finished flooring.

      Answered on 10/22/2013 by Tech & Install
  • Q:

    Can this be sanded and refinished?
    Asked on 10/9/2013 by Eric from New Hampshire

    1 answer

    • Staff Reviewer

      A:

      Yes we recommend a professional sand and finish expert would have to make the determination on site on which sanding process will be needed or which can be done to restore the floors shine.
      thank you for your inquiry

      Answered on 10/10/2013 by cc-3
  • Q:

    About how much adhesive is needed for a single box of flooring (22 sq ft)?
    Asked on 8/20/2013 by "workstoohardjenny"

    1 answer

    • Staff Reviewer

      A:

      Bellawood ¾” solid flooring should only be nailed down to an approved subfloor, however the low profile flooring (5/16” to ½” thick) can be glued to plywood or to concrete substrates.
      Thank you for your inquiry

      Answered on 8/21/2013 by cc-3
  • Q:

    Would you recommend this for kitchens?
    Asked on 7/16/2012 by florence from Oklahoma

    1 answer

    • Staff Reviewer

      A:

      This is Bellawood and would work wonderfully anywhere in your home with the 8 layer finish

      Answered on 7/19/2012 by Patricia from 1024
  • Q:

    I'm planning to install in bathroom. This won't be a problem will it?
    Asked on 3/26/2012 by Anonymous

    1 answer

    • Staff Reviewer

      A:

      Due to the excessive moisture present in a full bath we cannot recommend any of our natural flooring or laminate products for this application, I would suggest one of our vinyl Tranquility products. We have a 2mm peel and stick and now a 4mm click together product that can go in full bath areas or where moisture is a concern. Thank you for your inquiry.

      Answered on 3/27/2012 by customer care 2
  • Q:

    what type of "finish" does this have. Gloss. high gloss, satin,? what would you use to fix scratches?
    Asked on 2/20/2012 by Anonymous

    1 answer

    • Staff Reviewer

      A:

      Our Bellawood floors are factory pre-finished with an aluminum oxide water-base urethane using a multi-step application process. (8) coats are applied to most domestic and exotic wood species and each coat is hard-cured using Ultraviolet (UV) light. Bellawood pre-finished flooring offers superior wear resistance and is backed by a limited 100-year warranty! (The exact formula is propietary information) The formula for the Bellawood finish is a custom mix that has a 50/50 gloss. The sheen you get is shinier than satin, but not as shiny as semi -gloss.
      The average dry film thickness for Bellawood is about 3.65 mils – one of the highest in the industry.
      Maintaining the appearance of any wood floor requires close attention to in-door climate controls during seasonal changes.
      Thank you for your inquiry

      Answered on 3/30/2012 by customer care 2
Displaying questions 1-10Previous | Next »

Do you have a question about this product? 




back to top
 
loading...