to make a miter cut
See Figure 20, page 22 (of your instructions).
Miter cuts are made with the fence set at some angle other
Install the work clamp on the fence.
Place the fence in the miter cut position (see page 11)
and the fence to the desired angle. Tighten the clamp
Pull out the lock pin and push the saw to the rear of the
Place the workpiece flat on the saw table with one edge
securely against the fence.
Align cutting line on the workpiece with the edge of saw
blade. Use the work clamp to secure the workpiece. Do
Make sure the wood is clear of the blade before turning
on the saw.
Turn the saw on.
Let the blade build up to full speed before feeding the
workpiece into the blade.
Grasp the saw handle firmly. Slowly pull the blade into
and through the workpiece.
When the cut is made, turn the saw off. Wait for the
blade to come to a complete stop before removing the
Answered on 5/16/2015 by cc-2