|
Prefinished Natural Heart Pine T-Molding |
|
|
|
|
T-Moldings provide an attractive solution for blending floor surfaces in adjoining rooms. Want more?
|
REVIEW SNAPSHOT®
by PowerReviews(based on 1 review)
Ratings Distribution
Reviewed by 1 customer
Displaying review 1
Pros
Cons
Best Uses
Comments about Prefinished Natural Heart Pine T-Molding:
7.5 x 72 boards engineered T&G: install went fast; tight seams both ends and sides;400 SF installed by myself (DIY) took me only 3 days. Finding a stapler to rent took a while - [...] in Manchester, NH had what I needed including the supplies and instructions for use.This is a great looking floor once installed - Syberian Pine. I took off all the base board so I wouldn't have to use 1/4 round, looks more natural.The one thing I didn't like was my refrigerator rollers left compression marks that can be seen if the lighting is just right. I'm going to try steaming them out.
Bottom Line Yes, I would recommend this to a friend
Images shared by WoodChuck
Dinning Area
Images shared by WoodChuck
Kitchen area
Was this review helpful? Yes / No
- You may also flag this review
Displaying review 1
Do you have questions about this product?
AnswerBox - Get answers from Staff Experts and real customers by clicking "Ask a question"
or click here to ask our Customer Service Team
Q:
Can the 1/2" x 3" brazilian Cherry be installed on stairs which are attached to the wall on only one side.1 answer
A:
Yes it is possible using matching bullnosings.Q:
I am thinking of installing this kind of floor in my kitchen area and wanted to know if I would need to strip my vinyl floor currently in place or can just install over it. Thanks1 answer
CUSTOMER CARE
A:
Yes, hardwood can be installed over well secured firm kitchen vinyl. Vinyls that are rubbery, heavily embossed, or foamy must be removed for a firm floor. For naildown flooring, vinyls that are covered over tend to sweat, so as a barrier use red rosin paper or black 15lb roofing felt under the new wood flooring. Your subfloor needs to be plywood under the vinyl for naildown installation.Q:
I was told at the store that this product can be glued down over existing tile. Since most solid hardwoods can't be glued down, what is different about this one? Is it a true solid hardwood?1 answer
A:
I would be glad to help you with this question.Q:
Could this product be installed as the interior sole of a boat (ie not exposed directly to the weather)?1 answer
A:
Due to the excessive moisture present on a boat we cannot recommend any of our natural flooring products for this application. Thank you for your inquiry.Q:
I know your Brazilian Cherry hardwood darkens in the sunlight after installation1 answer
A:
Yes it will but not to the same extent.Q:
If this is solid wood why do they say it has a 4.5 mm wear layer?0 answers
Q:
Wear layer depth?1 answer
A:
3.5 mm thick wear layer.Q:
Does anyone who has this flooring installed also have a dog? I am wondering how it holds up with a dog's nails?1 answer
A:
Despite today's advanced technology, water spills, dirt and other abrasive substances can damage a wood floor's finish. Location, traffic patterns, how often the floor is vacuumed and cleaned, children and/or pets are all factor that influence wear.Q:
can this product be installed in a bathroom?1 answer
A:
Yes, the product could be installed in a 1/2 bath, but I would not recommend it for a full bathroom.Q:
do i have to clue this 1/2 solid wood to concrete or can i click it together wIthout glue or nails?1 answer
A:
This product will need to be glued down.
