Swatch Shadow
repbanner
 
1-800-HARDWOOD (1-800-427-3966)   |  Customer Care   |  En Español   
Log In   |   My Account   |  Shopping Cart   |  Order Status  
R.L. Colston Natural 3/4"x4" Red Oak Quercus Rubra 1290 Unfinished Solid

R.L. Colston  3/4" x 4" Red Oak

R.L. Colston Natural 3/4"x4" Red Oak Quercus Rubra 1290 Unfinished Solid
Customer Rating


SKU: 10009309
Comparable Price $3.89/sq. ft.
Our Low Price $3.59/sq. ft.
Over 1000 s.f. $3.49/sq. ft.
Save up to $0.40/sq. ft. (10%)
Your Square Feet:


Check Measurement

23.4 sq. ft. per box
$84.01 each
Your Material Cost:


Add To Cart
Not sure it's the one? Order a sample! Add Sample
Add this product to your wish list   Add to Wish List

R.L. Colston
3/4" x 4" Red Oak
Unfinished  Natural

This item was successfully added to your cart.
Continue Shopping

Checkout Now

R.L. Colston- 3/4" x 4" Natural Red Oak Unfinished Square Edge Solid Hardwood Flooring

R. L. Colston & Sons offers traditional 3/4" unfinished solid hardwood in a variety of species.  2-1/4" to 5" widths.

- 3/4" Unfinished Solid Hardwood Floors
- 2-1/4" - 5" Widths
- Domestic and Exotic Species

- No warranty

Red Oak is America's most popular wood floor choice!
It is the benchmark for strength serving as the industry standard of hardness with a Janka hardness rating or 1,290. Its reddish-brown color tones give rooms of any style - from rustic to contemporary - a warm and cozy feeling. 
Red Oak will retain its beauty through years of wear and is almost unaffected upon sunlight exposure.

What is "Natural Grade"?
Natural Grade has some color variation, mineral coloring and small knots. It can also be referred to as #1 or 2nd grade.

Please note unfinished flooring is sold in open, strapped bundles and not sold in boxes.  This product  must be purchased in bundles.  Bundle size may vary.

Don't forget the molding and stair treads!
Click here to find our extensive selection of Moldings & Accessories for you to match wood species to your new floor.
(Who else can do that?)

 

 


QUALITY GUARANTEE: NO formaldehyde is used in the manufacturing or construction of this flooring.

You may need:
Molding &
Trim
48" Red Oak Tread   Unfinished
Comparable Price $49.90/EA
Our Low Price $24.99/EA
Add To Cart
Qty:  

Add To Cart
9/16" x 7-1/4" White Primed Colonial Baseboard
Comparable Price $2.29/LFT
Our Low Price $2.29/LFT
Add To Cart
Qty:  

Add To Cart
36" Red Oak Tread   Unfinished
Comparable Price $39.90/EA
Our Low Price $18.99/EA
Add To Cart
Qty:  

Add To Cart
48" Red Oak Riser   Clear Finish
Comparable Price $24.90/EA
Our Low Price $14.99/EA
Add To Cart
Qty:  

Add To Cart
4" x 10" Red Oak Grill Flush w/Frame   Unfinished
Our Low Price $21.99/EA
Add To Cart
Qty:  

Add To Cart
New Scratch Away 8oz. Bottle
Comparable Price $10.99/EA
Our Low Price $6.99/EA
Add To Cart
Qty:  

Add To Cart
4" x 12" Red Oak Grill Flush w/Frame   Unfinished
Our Low Price $21.99/EA
Add To Cart
Qty:  

Add To Cart
4" x 10" Red Oak Drop In Grill   Unfinished
Our Low Price $17.99/EA
Add To Cart
Qty:  

Add To Cart
White Silicone Vapor Paper 400 Sq Ft
Comparable Price $19.99/EA
Our Low Price $19.99/EA
Add To Cart
Qty:  

Add To Cart
4" x 12" Red Oak Drop In Grill   Unfinished
Our Low Price $24.99/EA
Add To Cart
Qty:  

Add To Cart
Mapei
Mapei Ultrabond 905 Urethane Adhesive 10.1oz
Comparable Price $8.99/EA
Our Low Price $5.96/EA
Add To Cart
Qty:  

Add To Cart
Bostik
Bostik Best Adhesive 10oz
Comparable Price $8.99/EA
Our Low Price $5.99/EA
Add To Cart
Qty:  

Add To Cart
Dream Home
Insulayment 100 SFT ROLL
Comparable Price $59.99/EA
Our Low Price $50.00/EA
Add To Cart
Qty:  

Add To Cart
Dream Home
6mm 2' x 3' Cork Underlayment Sheet
Comparable Price $149.99/EA
Our Low Price $118.46/EA
Add To Cart
Qty:  

Add To Cart
Elastilon
Self Adhesive Underlayment
Comparable Price $229.99/EA
Our Low Price $214.96/EA
Add To Cart
Qty:  

Add To Cart
White Primed Colonial Baseboard 9/16" x 5-1/4"
Comparable Price $3.99/LFT
Our Low Price $1.59/LFT
Add To Cart
Qty:  

Add To Cart
White Primed Shoe Molding
Comparable Price $1.19/LFT
Our Low Price $0.39/LFT
Add To Cart
Qty:  

Add To Cart
White Primed Colonial Baseboard
Comparable Price $2.99/LFT
Our Low Price $1.19/LFT
Add To Cart
Qty:  

Add To Cart
White Primed Quarter Round
Comparable Price $1.29/LFT
Our Low Price $0.54/LFT
Add To Cart
Qty:  

Add To Cart
Unfinished Red Oak Stair Nose   Unfinished
Comparable Price $3.59/LFT
Our Low Price $3.29/LFT
Add To Cart
Qty:  

Add To Cart
Unfinished Red Oak Overlap Reducer   Unfinished
Comparable Price $3.29/LFT
Our Low Price $2.69/LFT
Add To Cart
Qty:  

Add To Cart
Unfinished Red Oak Reducer   Unfinished
Comparable Price $2.39/LFT
Our Low Price $1.99/LFT
Add To Cart
Qty:  

Add To Cart
Unfinished Red Oak Threshold   Unfinished
Comparable Price $2.99/LFT
Our Low Price $2.39/LFT
Add To Cart
Qty:  

Add To Cart
Unfinished Red Oak Threshold   Unfinished
Comparable Price $2.29/LFT
Our Low Price $1.99/LFT
Add To Cart
Qty:  

Add To Cart
Unfinished Red Oak T-Molding   Unfinished
Comparable Price $2.29/LFT
Our Low Price $1.99/LFT
Add To Cart
Qty:  

Add To Cart
Unfinished Red Oak Baseboard   Unfinished
Comparable Price $3.29/LFT
Our Low Price $2.29/LFT
Add To Cart
Qty:  

Add To Cart
Unfinished Red Oak Quarter Round   Unfinished
Comparable Price $0.99/LFT
Our Low Price $0.79/LFT
Add To Cart
Qty:  

Add To Cart
Unfinished Red Oak Shoe Molding   Unfinished
Comparable Price $0.59/LFT
Our Low Price $0.59/LFT
Add To Cart
Qty:  

Add To Cart
Accessories

BELLAWOOD
BELLAWOOD Hardwood Floor Cleaner
Our Low Price $6.96/EA
Add To Cart
Qty:  

Add To Cart
BELLAWOOD
Floor Care Kit
Comparable Price $39.99/EA
Our Low Price $16.95/EA
Add To Cart
Qty:  

Add To Cart
Mechanics Gloves Extra Large
Comparable Price $12.99/EA
Our Low Price $7.99/EA
Add To Cart
Qty:  

Add To Cart
Mechanics Gloves Large
Comparable Price $12.99/EA
Our Low Price $7.99/EA
Add To Cart
Qty:  

Add To Cart
New Scratch Away 8oz. Bottle
Comparable Price $10.99/EA
Our Low Price $6.99/EA
Add To Cart
Qty:  

Add To Cart
Utility Knife
Comparable Price $3.99/EA
Our Low Price $2.96/EA
Special Price $1.48/EA
Add To Cart
Qty:  

Add To Cart
Lumber Liquidators
Felt Pads Various Sizes 43-Pack
Comparable Price $3.99/EA
Our Low Price $2.96/EA
Add To Cart
Qty:  

Add To Cart
Lumber Liquidators
1-1/2" Heavy Duty Felt Pads 8-Pack
Comparable Price $2.99/EA
Our Low Price $1.96/EA
Add To Cart
Qty:  

Add To Cart
Lumber Liquidators
Safety Glasses with Pouch
Comparable Price $8.99/EA
Our Low Price $6.96/EA
Special Price $0.96/EA
Add To Cart
Qty:  

Add To Cart
4" x 12" Red Oak Drop In Grill   Unfinished
Our Low Price $24.99/EA
Add To Cart
Qty:  

Add To Cart
4" x 10" Red Oak Drop In Grill   Unfinished
Our Low Price $17.99/EA
Add To Cart
Qty:  

Add To Cart
4" x 12" Red Oak Grill Flush w/Frame   Unfinished
Our Low Price $21.99/EA
Add To Cart
Qty:  

Add To Cart
4" x 10" Red Oak Grill Flush w/Frame   Unfinished
Our Low Price $21.99/EA
Add To Cart
Qty:  

Add To Cart
48" Red Oak Riser   Clear Finish
Comparable Price $24.90/EA
Our Low Price $14.99/EA
Add To Cart
Qty:  

Add To Cart
Tools &
Maintenance
Norge
Multi Tool 1.8 A Variable Speed
Comparable Price $69.99/EA
Our Low Price $44.99/EA
Add To Cart
Qty:  

Add To Cart
Norge
Li-ON Drill/Multi-Tool Kit
Comparable Price $129.99/EA
Our Low Price $99.96/EA
Add To Cart
Qty:  

Add To Cart
Utility Knife
Comparable Price $3.99/EA
Our Low Price $2.96/EA
Special Price $1.48/EA
Add To Cart
Qty:  

Add To Cart
Underlayment &
Adhesives
BELLAWOOD
Premium Underlayment 100 Sq Ft
Comparable Price $89.99/EA
Our Low Price $89.99/EA
Add To Cart
Qty:  

Add To Cart
Eco Silent Sound HD Underlayment
Comparable Price $79.99/EA
Our Low Price $64.99/EA
Add To Cart
Qty:  

Add To Cart
Elastilon
Self Adhesive Underlayment
Comparable Price $229.99/EA
Our Low Price $214.96/EA
Add To Cart
Qty:  

Add To Cart
Dream Home
6mm 2' x 3' Cork Underlayment Sheet
Comparable Price $149.99/EA
Our Low Price $118.46/EA
Add To Cart
Qty:  

Add To Cart
Dream Home
Insulayment 100 SFT ROLL
Comparable Price $59.99/EA
Our Low Price $50.00/EA
Add To Cart
Qty:  

Add To Cart
Bostik
Bostik Best Adhesive 10oz
Comparable Price $8.99/EA
Our Low Price $5.99/EA
Add To Cart
Qty:  

Add To Cart
Mapei
Mapei Ultrabond 905 Urethane Adhesive 10.1oz
Comparable Price $8.99/EA
Our Low Price $5.96/EA
Add To Cart
Qty:  

Add To Cart
White Silicone Vapor Paper 400 Sq Ft
Comparable Price $19.99/EA
Our Low Price $19.99/EA
Add To Cart
Qty:  

Add To Cart


  • Brand:  R.L. Colston
  • FLOORING SKU:  10009309
  • SAMPLE SKU:  10003120
  • Trade Name:  Red Oak
  • Marketing Name:  Red Oak
  • Janka Rating:  1290
  • AC Rating:  N/A
  • Grade:  Natural
  • Color Shade:  Light
  • Width:  4"
  • Thickness:  3/4"
  • Construction:  Solid
  • Installation Type:  Nail, Staple
  • Sq. Ft. Per Box:  23.4
  • Hardness Rating:  Benchmark at 1290 on Janka Scale
  • Waste:  10%
  • Weight per box/unit:  63.18
  • Installation Details:  Installation Guide.pdf
  • Catalog Page:  R.L. Colston Catalog Page

  • Please click here to download Adobe Reader.

REVIEW SNAPSHOT®

by PowerReviews
R.L. Colston3/4" x 4" Red Oak
 
3.6

(based on 10 reviews)

Ratings Distribution

  • 5 Stars

     

    (3)

  • 4 Stars

     

    (4)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (2)

  • 1 Stars

     

    (1)

67%

of respondents would recommend this to a friend.

Pros

  • Easy to install (6)
  • Beautiful color (4)

Cons

    Best Uses

    • Family room (5)
    • Living room (5)
    • Dining room (4)
    • Kitchen (3)
      • Reviewer Profile:
      • Casual do-it-yourselfer (4), Avid do-it-yourselfer (3), Professional (3)

    Reviewed by 10 customers

    Sort by

    Displaying reviews 1-10

    Back to top

     
    5.0

    Great Product, looks fantastic

    By Alan

    from Walburg, Texas

    About Me Casual Do-It-Yourselfer

    Verified Reviewer

    Pros

    • Beautiful Color
    • Easy To Install

    Cons

      Best Uses

      • Bedroom
      • Dining Room
      • Family Room
      • Kitchen
      • Living Room
      • Office

      Comments about R.L. Colston 3/4" x 4" Red Oak:

      The floor was easy to lay out and nail. Very few defects in wood, very straight and properly cut.

        (0 of 4 customers found this review helpful)

         
        2.0

        Disappointed

        By Telegram Sam

        from Aurora Ohio

        About Me Casual Do-It-Yourselfer

        Pros

          Cons

            Best Uses

            • Dining Room
            • Family Room
            • Kitchen
            • Living Room

            Comments about R.L. Colston 3/4" x 4" Red Oak:

            Wanted a natural look with shade and grain variety but need to match a custom color so I went with unfinished red oak.

            (1 of 1 customers found this review helpful)

             
            5.0

            I would buy this wood again

            By Jim the handyman

            from Beaumont, Ca.

            About Me Casual Do-It-Yourselfer

            Verified Reviewer

            Pros

            • Beautiful Color
            • Durable
            • Easy To Install

            Cons

              Best Uses

                Comments about R.L. Colston 3/4" x 4" Red Oak:

                stair landing/blending with bedroom floor. Very hard wood making ideal for stairways. Used in my mountain cabin.

                 
                1.0

                Not what I had hoped for.

                By Stosh

                from Yorktown, VA

                About Me Avid Do-It-Yourselfer

                Verified Reviewer

                Pros

                  Cons

                    Best Uses

                      Comments about R.L. Colston 3/4" x 4" Red Oak:

                      When I went with Natural instead of Select, I expected some knots and heartwood. I did not expect so many of the pieces had worm holes in them. Even worse, the pieces were not well sanded still showing saw marks. I had to spend alot of time sanding the pieces otherwise the saw marks would have attracted stain.

                      (0 of 1 customers found this review helpful)

                       
                      4.0

                      ; Few Throw-Away Boards

                      By David

                      from Dana Point, CA

                      About Me Avid Do-It-Yourselfer

                      Verified Reviewer

                      Pros

                      • Consistent plane thicknes
                      • Cost
                      • Easy To Install
                      • Tongue-and-groove fit wel

                      Cons

                        Best Uses

                        • Kitchen

                        Comments about R.L. Colston 3/4" x 4" Red Oak:

                        I repurposed the floor material for a wood ceiling in my kitchen.

                        I chose a natural grade for the grain variations and small knots to create a rustic feel. (The rustic grade would have been too much of a constrast with the cabinetry.)

                        I v-grooved each board to create a "plank" feel. Then, hand distressed each board.

                        The expected outcome is a finished wood ceiling that matches the finish of the kitchen cabinets.

                        (1 of 1 customers found this review helpful)

                         
                        2.0

                        bundles are shorts

                        By swodem

                        from Joliet, IL

                        About Me Professional

                        Verified Reviewer

                        Pros

                          Cons

                          • Difficult To Install

                          Best Uses

                          • Na

                          Comments about R.L. Colston 3/4" x 4" Red Oak:

                          Price is decent, but they don't tell you that the bundles are made up of mostly short board lengths. When you lift up the bundles, they fall apart, because there are no long boards to keep them together. Also, it was very hard to get the tongue and groove to go together.
                          I was also shorted on quantity, but they did give me the bundles I needed for no cost.

                          (1 of 1 customers found this review helpful)

                           
                          5.0

                          Wonderful product

                          By T

                          from Fresno, CA

                          About Me Professional

                          Verified Buyer

                          Pros

                          • Attractive Finish
                          • Beautiful Color
                          • Durable
                          • Easy To Clean
                          • Easy To Install

                          Cons

                            Best Uses

                            • Dining Room
                            • Family Room
                            • Living Room

                            Comments about R.L. Colston 3/4" x 4" Red Oak:

                            Great product!

                            (2 of 3 customers found this review helpful)

                             
                            4.0

                            FANTASTIC FLOORING!!!

                            By JULIAN - THE PERFECTIONIST

                            from LANCASTER, OH

                            About Me Casual Do-It-Yourselfer

                            Verified Buyer

                            Pros

                            • Beautiful Color
                            • Easy To Install

                            Cons

                              Best Uses

                              • Bedroom
                              • Dining Room
                              • Family Room
                              • Living Room
                              • Office

                              Comments about R.L. Colston 3/4" x 4" Red Oak:

                              I HAD NEVER DONE ANY SORT OF WOOD FLOORING BEFORE ATTEMPTING THIS PROJECT. IT WENT DOWN EASY WITH NO PROBLEMS AND IT LOOKS FANTASTIC! FINISHING IT WAS A PIECE OF CAKE. THE PRODUCT IS OF GOOD QUALITY, THE PRICE WAS TERRIFIC AND THE SERVICE WAS VERY QUICK. I WOULD DEFINITELY RECOMMEND THE EXPERIENCE.

                              (3 of 3 customers found this review helpful)

                               
                              4.0

                              My floor came out beautifully!

                              By Diana

                              from Cumberland, RI

                              About Me Avid Do-It-Yourselfer

                              Verified Buyer

                              Pros

                              • Matched perfectly

                              Cons

                              • Unfinished came out beaut

                              Best Uses

                              • any

                              Comments about R.L. Colston 3/4" x 4" Red Oak:

                              I was supplementing wood that I had pulled up from an existing floor. The original floor was very rustic, had a rough and very dark finish. When the finish was removed from the old floor, we realized that there was a combination of red and white oak. The unfinished red oak that we got from LL fit perfectly because we had staggered it's use. We used a grey stain (Minwax - Driftwood) to blend the various colors together. The result is a beautiful and totally unique look to my dining room floor. I am very happy with the outcome.

                              (2 of 2 customers found this review helpful)

                               
                              4.0

                              beautiful grains and character.

                              By David

                              from eastern Penna.

                              About Me Professional

                              Verified Buyer

                              Pros

                              • Attractive Finish
                              • Easy To Install

                              Cons

                                Best Uses

                                • Family Room
                                • Living Room

                                Comments about R.L. Colston 3/4" x 4" Red Oak:

                                Very minimal waste quality from the mill was extremley good.

                                Displaying reviews 1-10

                                Back to top


                                Do you have questions about this product?

                                AnswerBox - Get answers from Staff Experts and real customers by clicking "Ask a question"

                                or click here to ask our Customer Service Team

                                8 Questions | 8 Answers
                                Displaying questions 1-8
                                • Q:

                                  Do we need to sand and smooth it down after installed and before we stain it?
                                  Asked on 10/24/2011 by momtomiranda from Nashville, TN

                                  1 answer

                                  • CUSTOMER CARE

                                    A:

                                    Generally unfinished flooring needs to be sanded so all joining boards are even and smooth. Then finishing can begin. Our installation service company HSS installs but at this time does not finish unfinished flooring. They can recommend a finisher or; Go to WWW.NWFACP.ORG and click on sand and finisher and then type in a zip code or city/state. These are NWFA certified installers and finishers. As with any company you should check their credentials before hiring.

                                    Answered on 10/26/2011 by Tech & Install
                                • Q:

                                  How long does this unfinished oak have to sit in the house before we install it? also, can you reccomend a sturdy polyurathene to put on this wood? we will not be staining it, or sanding it....just putting a few coats of poly on it. THANKS!
                                  Asked on 8/19/2011 by Susie from salt lake city

                                  1 answer

                                  • Staff Reviewer

                                    A:

                                    ACCLIMATION/CONDITIONING THE FLOORING -SEE MOISTURE
                                    All wood products are affected by environmental conditions especially prefinished materials. Acclimate the new flooring in the areas to be installed to normal lived-in conditions while in the boxes. Length of time is not the determining factor. The goal is to reach a moisture equilibrium or balance between the new flooring with its surroundings before installation. This balance could be achieved in as little as 1 to 5 days, or longer for some exotic species. For best performance, condition the flooring to consistent indoor temperatures of 60°-80° F and indoor humidity levels of 30% - 50%. Very dry or humid regions usually require extended conditioning. Recommended acclimation levels maintained even after the installation will minimize board movement, excessive squeaks and gaps.
                                    Proper acclimation, moisture testing of the product and subfloor, even jobsite conditions all work together for the continued success of the installation and is the responsibility of those overseeing the project -the installer or wood floor owner.
                                    You can find complete installation instructions on the product page by clicking on the specs tab and then clicking on - Installation Guide.pdf
                                    Thank you for your question.

                                    Answered on 8/24/2011 by customer care 2
                                • Q:

                                  Is there any problem with mixing different widths for a random look?
                                  Asked on 2/8/2011 by Mari from Canton, MI

                                  1 answer

                                  • Staff Reviewer

                                    A:

                                    I would recommend that you check to make sure that the two different widths come from the same mill so the tongue and grooves will match.

                                    Answered on 2/9/2011 by customer care 2
                                • Q:

                                  Will unfinished Red Oak accept darker stains? Any examples of darker stain varieties?
                                  Asked on 1/28/2011 by Anonymous

                                  1 answer

                                  • Staff Reviewer

                                    A:

                                    Yes unfinished Red Oak flooring will accept darker stains. Many customers choose to stain red oak with a darker gunstock stain.

                                    Answered on 2/1/2011 by Customer Care1
                                • Q:

                                  What is the length of each plank?
                                  Asked on 1/4/2011 by Anonymous from Atlanta

                                  1 answer

                                  • Staff Reviewer

                                    A:

                                    This is a random length product that comes 1' to 7' lengths.

                                    Answered on 2/3/2011 by customer care 2
                                • Q:

                                  Can this product type be glued down or does it have to be nailed or stapled
                                  Asked on 11/24/2010 by jeff first time from Dallas Tx

                                  1 answer

                                  • Staff Reviewer

                                    A:

                                    This is a solid 3/4" product designed to be nailed to a wood substrate.
                                    However it can be floated using our Elastilon product.

                                    Answered on 12/2/2010 by customer care 2
                                • Q:

                                  Is any of the Colston oak flooring tongue and groove?
                                  Asked on 7/22/2010 by Drew from Edgewater, MD

                                  1 answer

                                  • Staff Reviewer

                                    A:

                                    All of R.L. Colston products are tongue and grooved.

                                    Answered on 9/1/2010 by customer care 2
                                • Q:

                                  is the face of the floor 4" or does the width include the tongue?
                                  Asked on 7/12/2010 by Anonymous

                                  1 answer

                                  • Staff Reviewer

                                    A:

                                    The 4 " is the face only.

                                    Answered on 8/20/2010 by customer care 2
                                Displaying questions 1-8

                                Do you have a question about this product? 




                                back to top
                                 
                                loading...