36" Red Oak Riser
ROR36 Select 36" Red Oak Riser Unfinished
3/4" X 7-1/4" X 36" Stair Riser
Reviewed by 1 customer
Displaying review 1
Comments about 36" Red Oak Riser:
Used as riser for steps. Great quality and eazy to install.
Do you have questions about this product?
AnswerBox - Get answers from Staff Experts and real customers by clicking "Ask a question"
or click here to ask our Customer Service Team
Q:I would like to install the engineered Golden Teak over a plywood sub-floor on a first floor room with a full basement below. I have already done numerous rooms on the same floor with the L/L solid Golden Teak over Luan and underlayment but wanted to try the engineered. The solid turned our beautifully. The engineered floor recommends only floating this type of flooring and without Luan underneath. Why? Could I install it the same way?
A:Please call our Tech and Installation Dept. @ (800) 366-4204 for a detailed answer to your question. Thank you for your inquiry.
Q:What are the lengths that the boards come in? Typically are there more longer lengths than shorter? Also, is there an air vent cover that matches this flooring?
A:Lengths are - Minimum 15-3/4", Max49-1/4", Average 24-3/4" Thank you for your inquiry
Q:Just installed the 1/2" engineered version using the nailed method. What is the best filler to use to for the 1st and last row nail holes. Hoping to find somthnig the would not need sdditional staining.
A:Wax filler sticks, stain markers and color-putty are now available at your local Lumber Liquidators used for minor hardwood repairs. This process is used to fill-in face-nails, nicks and gouges. Select the appropriate stick color to match the damaged area. Often several colors are used to blend colors for exotic species bring a scrap piece of the flooring to match it up. Thank you for your inquiry.
Q:How thick is the wear layer? Can it be refinished?
A:Yes you can refinish this flooring. However a flooring abrader is necessary because of the 2mm thick hand scraped veneer. FA-8: The Floor Abrader
Q:We are in the process of having the floor installed. A few planks that were installed have small chips on the edges. Can they be fixed or do they need to be removed and replaced?
A:Repairs can often be made using ColorFill Floor Repair Putty or a small art brush with water-based poly-urethane. To avoid chipping during installation, be certain nailer shoe is designed for prefinished flooring.
Q:We have a seasonal home in AZ where we would like to install this product. We are not in the home during the summer months. Will we need to air condition the house in the summer? If so, what is the range we would need to maintain?
A:Just like you, wood actually performs best with consistent indoor temperatures of 60°-80° F and indoor humidity levels of 30% - 50%. Very dry or humid regions of the country usually require extended conditioning. Maintaining the recommended acclimation levels even after the installation should be viewed as ongoing floor care. Your doing so will help to minimize board movement, excessive squeaks, finish cracking and gaps.
Q:what is the hardness or janka rating of this product?
A:The Janka hardness test is done only on solid wood products and does not apply to a veneered flooring product, engineered flooring is not solid wood and only the thin surface veneer has the botanical species on it.
Q:Will the finish on your 1/2 inch Golden Teak stair nose match the finish of the 1/2 inch Golden Teak engineered floor?
A:Nosing SKU: #10006775 is designed to match this flooring.
Q:Can engineered flooring be refinished ?
A:Yes. However less times than solid. Handscraped also requires an abrader such as the FA-8 Floor Abrader instead of traditional sanders because of the uneven surface.
Q:We have two small dogs that don't always mind their manners in the house. How does dog pee fair on this floor?
A:Despite today's advanced technology, water spills, dirt and other abrasive substances can damage a wood floor's finish. Location, traffic patterns, how often the floor is vacuumed and cleaned, children and/or pets are all factors that influence wear and durability.