Swatch Shadow
repbanner
 
1-800-HARDWOOD (1-800-427-3966)   |  Customer Care   |  En Español   
Log In   |   My Account   |  Shopping Cart   |  Order Status  
R.L. Colston Select 3/4"x2 1/4" Red Oak Quercus Rubra 1290 Unfinished Solid

R.L. Colston  3/4" x 2 1/4" Red Oak Select

R.L. Colston Select 3/4"x2 1/4" Red Oak Quercus Rubra 1290 Unfinished Solid
Customer Rating


SKU: 10012753
Comparable Price $3.99/sq. ft.
Our Low Price $3.79/sq. ft.
Over 1000 s.f. $3.69/sq. ft.
Save up to $0.30/sq. ft. (8%)
Your Square Feet:


Check Measurement

1 sq. ft. per box
$3.79 each
Your Material Cost:


Add To Cart
Not sure it's the one? Order a sample! Add Sample
Add this product to your wish list   Add to Wish List

R.L. Colston
3/4" x 2 1/4" Red Oak Select
Unfinished  Select

This item was successfully added to your cart.
Continue Shopping

Checkout Now

R.L. Colston- 3/4" x 2-1/4" Red Oak Select Unfinished Square Edge Solid Hardwood Flooring

R. L. Colston & Sons offers traditional 3/4" unfinished solid hardwood in a variety of species.  2-1/4" to 5" widths.

- 3/4" Unfinished Solid Hardwood Floors
- 2-1/4" - 5" Widths
- Domestic and Exotic Species
- No warranty

Red Oak is America's most popular wood floor choice!
It is the benchmark for strength serving as the industry standard of hardness with a Janka hardness rating or 1,290. Its reddish-brown color tones give rooms of any style - from rustic to contemporary - a warm and cozy feeling. 
Red Oak will retain its beauty through years of wear and is almost unaffected upon sunlight exposure.

Please note unfinished flooring is sold in open, strapped bundles and not sold in boxes.  This product  must be purchased in bundles.  Bundle size may vary.

Don't forget the molding and stair treads!
Click here to find our extensive selection of Moldings & Accessories for you to match wood species to your new floor.
(Who else can do that?)

 


QUALITY GUARANTEE: NO formaldehyde is used in the manufacturing or construction of this flooring.

You may need:
Molding &
Trim
Unfinished Red Oak Shoe Molding   Unfinished
Comparable Price $0.59/LFT
Our Low Price $0.59/LFT
Add To Cart
Qty:  

Add To Cart
Unfinished Red Oak Quarter Round   Unfinished
Comparable Price $0.99/LFT
Our Low Price $0.79/LFT
Add To Cart
Qty:  

Add To Cart
Unfinished Red Oak Baseboard   Unfinished
Comparable Price $3.29/LFT
Our Low Price $2.29/LFT
Add To Cart
Qty:  

Add To Cart
Unfinished Red Oak T-Molding   Unfinished
Comparable Price $2.29/LFT
Our Low Price $1.99/LFT
Add To Cart
Qty:  

Add To Cart
Unfinished Red Oak Threshold   Unfinished
Comparable Price $2.29/LFT
Our Low Price $1.99/LFT
Add To Cart
Qty:  

Add To Cart
Unfinished Red Oak Threshold   Unfinished
Comparable Price $2.99/LFT
Our Low Price $2.39/LFT
Add To Cart
Qty:  

Add To Cart
Unfinished Red Oak Reducer   Unfinished
Comparable Price $2.39/LFT
Our Low Price $1.99/LFT
Add To Cart
Qty:  

Add To Cart
Unfinished Red Oak Overlap Reducer   Unfinished
Comparable Price $3.29/LFT
Our Low Price $2.69/LFT
Add To Cart
Qty:  

Add To Cart
Unfinished Red Oak Stair Nose   Unfinished
Comparable Price $3.59/LFT
Our Low Price $3.29/LFT
Add To Cart
Qty:  

Add To Cart
48" Red Oak Tread   Unfinished
Our Low Price $31.79/EA
Add To Cart
Qty:  

Add To Cart
36" Red Oak Tread   Unfinished
Our Low Price $25.89/EA
Add To Cart
Qty:  

Add To Cart
48" Red Oak Riser   Unfinished
Comparable Price $29.90/EA
Our Low Price $24.90/EA
Add To Cart
Qty:  

Add To Cart
36" Red Oak Riser   Unfinished
Comparable Price $24.90/EA
Our Low Price $19.90/EA
Add To Cart
Qty:  

Add To Cart
4" x 10" Red Oak Grill Flush w/Frame   Unfinished
Our Low Price $21.99/EA
Add To Cart
Qty:  

Add To Cart
4" x 12" Red Oak Grill Flush w/Frame   Unfinished
Our Low Price $21.99/EA
Add To Cart
Qty:  

Add To Cart
4" x 10" Red Oak Drop In Grill   Unfinished
Our Low Price $17.99/EA
Add To Cart
Qty:  

Add To Cart
4" x 12" Red Oak Drop In Grill   Unfinished
Our Low Price $24.99/EA
Add To Cart
Qty:  

Add To Cart
White Primed Quarter Round
Comparable Price $1.29/LFT
Our Low Price $0.54/LFT
Add To Cart
Qty:  

Add To Cart
White Primed Colonial Baseboard
Comparable Price $2.99/LFT
Our Low Price $1.19/LFT
Add To Cart
Qty:  

Add To Cart
White Primed Shoe Molding
Comparable Price $1.19/LFT
Our Low Price $0.39/LFT
Add To Cart
Qty:  

Add To Cart
White Primed Colonial Baseboard 9/16" x 5-1/4"
Comparable Price $3.99/LFT
Our Low Price $1.59/LFT
Add To Cart
Qty:  

Add To Cart
9/16" x 7-1/4" White Primed Colonial Baseboard
Comparable Price $2.29/LFT
Our Low Price $2.29/LFT
Add To Cart
Qty:  

Add To Cart
Accessories

BELLAWOOD
BELLAWOOD Hardwood Floor Cleaner
Our Low Price $6.96/EA
Add To Cart
Qty:  

Add To Cart
BELLAWOOD
Floor Care Kit
Comparable Price $39.99/EA
Our Low Price $16.95/EA
Add To Cart
Qty:  

Add To Cart
Lumber Liquidators
Safety Glasses with Pouch
Comparable Price $8.99/EA
Our Low Price $6.96/EA
Special Price $5.21/EA
Add To Cart
Qty:  

Add To Cart
New Scratch Away 8oz. Bottle
Comparable Price $10.99/EA
Our Low Price $6.99/EA
Add To Cart
Qty:  

Add To Cart
Lumber Liquidators
1-1/2" Heavy Duty Felt Pads 8-Pack
Comparable Price $2.99/EA
Our Low Price $1.96/EA
Special Price $1.46/EA
Add To Cart
Qty:  

Add To Cart
Lumber Liquidators
Felt Pads Various Sizes 43-Pack
Comparable Price $3.99/EA
Our Low Price $2.96/EA
Special Price $2.21/EA
Add To Cart
Qty:  

Add To Cart
Mechanics Gloves Large
Comparable Price $12.99/EA
Our Low Price $7.99/EA
Add To Cart
Qty:  

Add To Cart
Mechanics Gloves Extra Large
Comparable Price $12.99/EA
Our Low Price $7.99/EA
Add To Cart
Qty:  

Add To Cart
Tools &
Maintenance
Norge
Multi Tool 1.8 A Variable Speed
Comparable Price $69.99/EA
Our Low Price $44.99/EA
Add To Cart
Qty:  

Add To Cart
Norge
Li-ON Drill/Multi-Tool Kit
Comparable Price $129.99/EA
Our Low Price $99.96/EA
Special Price $49.96/EA
Add To Cart
Qty:  

Add To Cart
Utility Knife
Comparable Price $3.99/EA
Our Low Price $2.96/EA
Special Price $2.21/EA
Add To Cart
Qty:  

Add To Cart
Underlayment &
Adhesives
BELLAWOOD
Premium Underlayment 100 Sq Ft
Comparable Price $89.99/EA
Our Low Price $89.99/EA
Add To Cart
Qty:  

Add To Cart
Eco Silent Sound HD Underlayment
Comparable Price $79.99/EA
Our Low Price $64.99/EA
Add To Cart
Qty:  

Add To Cart
Elastilon
Self Adhesive Underlayment
Comparable Price $269.99/EA
Our Low Price $179.96/EA
Add To Cart
Qty:  

Add To Cart
Dream Home
6mm 2' x 3' Cork Underlayment Sheet
Comparable Price $149.99/EA
Our Low Price $118.46/EA
Add To Cart
Qty:  

Add To Cart
Dream Home
Insulayment 100 SFT ROLL
Comparable Price $59.99/EA
Our Low Price $50.00/EA
Add To Cart
Qty:  

Add To Cart
Bostik
Bostik Best Adhesive 10oz
Comparable Price $8.99/EA
Our Low Price $5.99/EA
Add To Cart
Qty:  

Add To Cart
Mapei
Mapei Ultrabond 905 Urethane Adhesive 10.1oz
Comparable Price $8.99/EA
Our Low Price $5.96/EA
Add To Cart
Qty:  

Add To Cart
White Silicone Vapor Paper 400 Sq Ft
Comparable Price $19.99/EA
Our Low Price $19.99/EA
Add To Cart
Qty:  

Add To Cart


  • Brand:  R.L. Colston
  • FLOORING SKU:  10012753
  • SAMPLE SKU:  10012321
  • Trade Name:  Red Oak
  • Marketing Name:  Red Oak
  • Janka Rating:  1290
  • AC Rating:  N/A
  • Grade:  Select
  • Color Shade:  Light
  • Width:  2 1/4"
  • Thickness:  3/4"
  • Construction:  Solid
  • Installation Type:  Nail, Staple
  • Sq. Ft. Per Box:  1
  • Hardness Rating:  Benchmark at 1290 on Janka Scale
  • Waste:  10%
  • Weight per box/unit:  2.75
  • Installation Details:  Installation Guide.pdf
  • Catalog Page:  R.L. Colston Catalog Page

  • Please click here to download Adobe Reader.

REVIEW SNAPSHOT®

by PowerReviews
R.L. Colston3/4" x 2 1/4" Red Oak
 
4.4

(based on 161 reviews)

Ratings Distribution

  • 5 Stars

     

    (90)

  • 4 Stars

     

    (56)

  • 3 Stars

     

    (10)

  • 2 Stars

     

    (2)

  • 1 Stars

     

    (3)

95%

of respondents would recommend this to a friend.

Pros

  • Easy to install (84)
  • Durable (72)
  • Beautiful color (69)
  • Attractive finish (63)
  • Easy to clean (34)

Cons

  • Difficult to install (5)
  • Prone to warping (5)

Best Uses

  • Living room (92)
  • Dining room (88)
  • Family room (80)
  • Bedroom (72)
  • Office (52)
    • Reviewer Profile:
    • Avid do-it-yourselfer (66), Professional (30), Casual do-it-yourselfer (24), Beginner (12), Novice (7)

Reviewed by 161 customers

Sort by

Displaying reviews 1-10

Back to top

Previous | Next »

 
4.0

Satisfied customer

By Steve

from Gig Harbor, WA

About Me Avid Do-It-Yourselfer

Verified Reviewer

Pros

  • Consistent Width

Cons

  • Lack Of Quality Control

Best Uses

  • Dining Room
  • Living Room

Comments about R.L. Colston 3/4" x 2 1/4" Red Oak:

I was surprised there were quite a number of boards that had little or no tongue. I threw enough of these in a pile that I had enough to take back to lumber liquidators and exchange for a new box (no problem doing so). A few boards had deep checks in them which I also felt were unusable. I also found a lot of variation in the lengths that made up each box; some boxes would have 5 or 6 full length boards while others wouldn't have a board longer than 4 feet.

On the whole I was satisfied with the product.

 
5.0

Worked great!

By Patty

from Indianapolis, IN

About Me Casual Do-It-Yourselfer

Verified Reviewer

Pros

    Cons

      Best Uses

        Comments about R.L. Colston 3/4" x 2 1/4" Red Oak:

        Just needed to fill the hardwood in an old house where we removed a wall -- and this worked great for that. Once the whole floor was sanded and refinished, the difference was hard to see.

         
        4.0

        Nice Quaility - Easy to lay

        By NCPV

        from Charlotte, NC

        About Me Professional

        Pros

        • Good Milling

        Cons

          Best Uses

            Comments about R.L. Colston 3/4" x 2 1/4" Red Oak:

            Nicely milled - fits together easily.
            Only a few unusable pieces - very satisfied

             
            4.0

            3/4" unf. oak in short and long lenghts

            By hammer girl

            from Seattle, Washington

            About Me Avid Do-It-Yourselfer

            Pros

              Cons

                Best Uses

                  Comments about R.L. Colston 3/4" x 2 1/4" Red Oak:

                  Given the cold winter back east and the mill date of December 31, 2013 the wood was very dry being delivered 8 weeks later.

                   
                  5.0

                  unfinished oak flooring

                  By cat man

                  from Old Town. Me

                  About Me Avid Do-It-Yourselfer

                  Pros

                  • Beautiful Color
                  • Durable
                  • Easy To Install

                  Cons

                  • Scratches Easily

                  Best Uses

                  • Bedroom
                  • Dining Room
                  • Living Room
                  • Office

                  Comments about R.L. Colston 3/4" x 2 1/4" Red Oak:

                  The quality of the flooring was as good as I wanted with a lot of long pieces and enough of assorted lengths to make it easy to complete rows with very little waste. Minimal warping.

                   
                  5.0

                  Installing for Gym

                  By Scott

                  from Bel Air, MD

                  About Me Avid Do-It-Yourselfer

                  Verified Reviewer

                  Pros

                  • Goodlengths

                  Cons

                    Best Uses

                      Comments about R.L. Colston 3/4" x 2 1/4" Red Oak:

                      Good quality and lengths

                       
                      4.0

                      Pretty happy with the product

                      By mr123

                      from colorado

                      About Me Beginner

                      Verified Reviewer

                      Pros

                      • Easy To Install

                      Cons

                        Best Uses

                        • Dining Room
                        • Family Room
                        • Kitchen
                        • Living Room

                        Comments about R.L. Colston 3/4" x 2 1/4" Red Oak:

                        I wanted to try laying unfinished hardwood so we decided to replace our dining room carpet with 2 1/4" unfinished red oak. I needed about 190 sf. I had to round up and buy an extra bundle just to make sure I didn't round up. The store was $0.10/sf more expensive that ordering online (which I didn't understand) but I didn't want to wait so I bought it at the store. The quality was very good. I didn't throw anything out. My only complaint is that some of the shorter pieces were a little narrow at the ends. That left some gaps when I nailed the next row. Overall the floor looks very nice. I'll get it sanded and finished in a couple of weeks after new cabinets arrive. Because the yield was so good I was able to return one bundle. Paying the 20% restocking fee was annoying.

                         
                        4.0

                        Great flooring, good price.

                        By Tommy B

                        from Canton, MA

                        About Me Beginner

                        Pros

                        • Beautiful Color
                        • Easy To Install

                        Cons

                          Best Uses

                          • Dining Room
                          • Family Room
                          • Living Room

                          Comments about R.L. Colston 3/4" x 2 1/4" Red Oak:

                          Overall very satisfied so far.

                          (1 of 1 customers found this review helpful)

                           
                          5.0

                          Good clean material

                          By Ed the contractor

                          from Broomall, PA

                          About Me Professional

                          Verified Reviewer

                          Pros

                          • Easy To Install

                          Cons

                            Best Uses

                            • Bedroom
                            • Dining Room
                            • Family Room
                            • Living Room
                            • Office

                            Comments about R.L. Colston 3/4" x 2 1/4" Red Oak:

                            This unfinished red oak select was much better than I expected from a discount floor store. Very few defects (milling) or undesirable pieces (natural characters). A good mix of lengths, though not a majority of longs as you would see in a good old fashion high quality floor. Consistent color with little variation for my particular order of wood 332 sq ft. I would probably say this grade of wood is in the mid range for "select." Keep in mind that I'm not an every day installer. I'm a remodeler. Real hardwood flooring guys may have a more critical review. If you are a DIY, then I think you would fair pretty well with this material. Just watch your joint spacing and spread out the shorts throughout your installation. Seek a professional opinion beforehand if you are trying to match or blend into existing high quality floors.

                            Service and delivery comments:

                            I did not use a delivery service. I picked up the material myself. Excellent customer service as they had called me to tell me that my order just came in and I even scheduled to go and pick it up that very evening. Warehouse guy was curteous and prompt and I was loaded up and on my way in no time.

                             
                            4.0

                            great wood

                            By morty

                            from Temecula Ca.

                            About Me Professional

                            Pros

                            • Durable

                            Cons

                              Best Uses

                              • Bedroom
                              • Family Room
                              • Kitchen
                              • Office

                              Comments about R.L. Colston 3/4" x 2 1/4" Red Oak:

                              its hard wood flooring it will last a life time

                              Service and delivery comments:

                              yes service greatt

                              Displaying reviews 1-10

                              Back to top

                              Previous | Next »


                              Do you have questions about this product?

                              AnswerBox - Get answers from Staff Experts and real customers by clicking "Ask a question"

                              or click here to ask our Customer Service Team

                              45 Questions | 46 Answers
                              Displaying questions 1-10Previous | Next »
                              • Q:

                                What is the average length per bundle? What, typically, are the longet and teh shortest lengths to be found in a bundle?
                                Asked on 6/6/2014 by Mike

                                1 answer

                                • Staff Reviewer

                                  A:

                                  This is a random length wood product that comes 1’ to 7’ in length, the average length is about 3.25'. Thank you for your inquiry.

                                  Answered on 6/9/2014 by cc-3
                              • Q:

                                Can I install 3/4 redoak flooring over a concrete slab
                                Asked on 3/29/2014 by Althea from Pittsburgh, PA

                                2 answers

                                • Staff Reviewer

                                  A:

                                  Please call our Tech and Installation Dept. @ (800) 366-4204 for a detailed answer to your question. Thank you for your inquiry.

                                  Answered on 4/1/2014 by Anonymous
                                • CUSTOMER CARE

                                  A:

                                  Only with a plywood subfloor installed over the concrete OR if you use Elastilon Self Adhesive Underlayment as your installation system.

                                  Answered on 4/1/2014 by Tech & Install
                              • Q:

                                Is thsi product quarter sawn?
                                Asked on 5/21/2013 by Matt from 70123

                                1 answer

                                • Staff Reviewer

                                  A:

                                  This is a plain sawn oak product, for quarter sawn look at;

                                  3/4" x 2 1/4" Rift/Quartersawn Red Oak
                                  SKU: 10010587
                                  Compare at $3.49/SFT
                                  As Low As $3.09/SFT

                                  Answered on 5/22/2013 by cc-2
                              • Q:

                                2 1/4" red oak select. Is this pre-sealed?
                                Asked on 3/14/2013 by Brian

                                1 answer

                                • CUSTOMER CARE

                                  A:

                                  R.L. Colston is an unfinished flooring that requires site sanding and finishing. Today's hardwood finishes are most durable and are applied in a quality controlled environment. We offer several pre-finish coatings, whereas most site-finished floors -sanded and finished at the job site- would only have two or three coats applied, then these must be air dried.

                                  There are more advantages than disadvantages of pre-finished materials. Nearly all pre-finished hardwood floors will have beveled edges to some extent. On the other hand, site finished flooring will have a flawless uniform appearance when sanded. Many people with health concerns or respiratory issues choose pre-finished floors because these are installed without the usual sanding dust and fumes commonly associated with site finished floors. Another benefit is that these can be installed and walked on the same day!

                                  Our Bellawood floors are factory pre-finished with an aluminum oxide water-base urethane using a multi-step application process. (8) coats are applied to most domestic and exotic wood species and each coat is hard-cured using Ultraviolet (UV) light. Bellawood pre-finished flooring offers superior wear resistance and is backed by a limited 100-year warranty! Maintaining the appearance of any wood floor requires close attention to in-door climate controls during seasonal changes.

                                  Therefore, whether you choose one of our many “pre-finished” or “un-finished styles, we will have a floor for you. Let us know how we can help with your selection.

                                  Answered on 3/20/2013 by Tech & Install
                              • Q:

                                What is select compared to the other unfinished red oaks?
                                Asked on 11/23/2012 by Jess

                                1 answer

                                • Staff Reviewer

                                  A:

                                  Select
                                  This is a random length wood product that comes 1’ to 7’ in length, the average length is about 3.25'.
                                  This is the top grade and the overall appearance shall be good. The face of strips shall be selected for appearance after finishing. This grade includes characteristics found in the unfinished grades of CLEAR and SELECT grade.
                                  The following characters are admitted: unlimited sapwood and the natural variations of color; occasional small burls; light brown steaks not more than 1/8" in width and 6" in length or the equivalent; an occasional very small tight 1/8" knot; and limited 1/32" fine pinworm holes, may be included in any one piece when properly filled.
                                  Natural
                                  This is a random length wood product that comes 1’ to 7’ in length, the average length is about 2.5'.
                                  The face of strips may contain sound wood characteristics which are even and smooth after filling and finishing. This grade includes some characteristics found in the unfinished grades SELECT, NO.1 COMMON, and NO. 2 COMMON.
                                  The following characters are admitted; worm holes; season and kiln checks, broken knots up to 3/8" in diameter, minor imperfections in machining, torn grain and burns. Other characters will be admitted if they do not impair the soundness of the floor. All larger admitted open characters are to be properly filled and finished. Limited unfinished/unfilled small open grade characters permitted.
                                  Large grub worm holes, splits extending through the piece, shake and similar unsound defects not admitted.
                                  For naturally finished coloration- all the varying color characteristics of the wood admitted to include, Sticker Stain, and Dark Streaks up to 3/8" in width not to exceed 1" in length for each lineal foot.
                                  STANDARD & BETTER PREFINISHED OAK
                                  A combination of PRIME and STANDARD grade developing from the production run. Minimum average length 2 1/2'. Bundles 1 1/4' and up.
                                  TAVERN, UTILITY & CABIN
                                  This is a random length wood product that comes 1’ to 7’ in length, the average length is about 2'.
                                  Should lay a serviceable floor.
                                  A limited amount of unfilled/unfinished open characters admitted. A limited amount of pieces with finish irregularities such as bubbles, small skips, lines, stain/color variation, surface handling scratches, minor trash, and the like are allowed.
                                  The following characters are NOT admitted: mis-manufactured boards; shattered or rotten ends; large open knots and other unsound defects of a similar nature; pieces with less than 1/4 full tongue.Minimum average length 2'. Bundles 1 1/4' and up.

                                  Answered on 12/6/2012 by cc-2
                              • Q:

                                what are my installation options, as I can not nail it, we have under the floor heating
                                Asked on 8/28/2012 by Leanne from norwalk iowa

                                1 answer

                                • Staff Reviewer

                                  A:

                                  This is a solid 3/4" product designed to be nailed to a wood substrate.
                                  But can be installed over concrete using our Elastilon underlayment.
                                  What you should know about Elastilon Strong
                                  An Elastilon-backed wood floor is much faster to install than traditional nail or glue-down methods.
                                  Elastilon Strong can be installed on new concrete floors, handling up to 3.9% moisture content. A vapour barrier of at least 6 mil PE should be used below grade and on newly poured concrete above grade where the moisture content is above 3.9%.
                                  Laid down with a 5/8” (15 mm) expansion gap, Elastilon Strong creates a dynamic, floating floor that expands or contracts naturally with the hardwood.
                                  Elastilon Strong has no odor and is free of volatile materials.
                                  Elastilon Strong gives cushioned comfort.
                                  1/8” (3 mm) thick Elastilon Strong has ratings of IIC 62 and STC 54.
                                  Thermal resistance: R _ 0,15 (m K) / W
                                  Elastilon Strong carries a 70-year limited warranty. Thank you for your inquiry.

                                  Answered on 9/7/2012 by cc-2
                              • Q:

                                What is the recommended acclimation time for this product? We will be installing above grade on a concrete subfloor using the Elastion underlayment.
                                Asked on 8/14/2012 by Wills and a Way

                                1 answer

                                • Staff Reviewer

                                  A:

                                  ACCLIMATION/CONDITIONING THE FLOORING -SEE MOISTURE
                                  All wood products are affected by environmental conditions especially prefinished materials. Acclimate the new flooring in the areas to be installed to normal lived-in conditions while in the boxes. Length of time is not the determining factor. The goal is to reach a moisture equilibrium or balance between the new flooring with its surroundings before installation. This balance could be achieved in as little as 1 to 5 days, or longer for some exotic species. For best performance, condition the flooring to consistent indoor temperatures of 60°-80° F and indoor humidity levels of 30% - 50%. Very dry or humid regions usually require extended conditioning. Recommended acclimation levels maintained even after the installation will minimize board movement, excessive squeaks and gaps.
                                  Proper acclimation, moisture testing of the product and subfloor, even jobsite conditions all work together for the continued success of the installation and is the responsibility of those overseeing the project -the installer or wood floor owner.
                                  You can find complete installation instructions on the product page by clicking on the specs tab and then clicking on - Installation Guide.pdf
                                  Thank you for writing in.

                                  Answered on 8/20/2012 by cc-2
                              • Q:

                                Can the product be sanded and finished before installation
                                Asked on 8/2/2012 by Jay from Worcester NY

                                1 answer

                                • CUSTOMER CARE

                                  A:

                                  Yes. It is required in most installations.

                                  Answered on 8/2/2012 by Tech & Install
                              • Q:

                                is this product tung and groove?
                                Asked on 8/1/2012 by Kirt from Dade City, Fl

                                1 answer

                                • Staff Reviewer

                                  A:

                                  Yes this material is tongue and groove

                                  Answered on 8/8/2012 by Patricia from 1024
                              • Q:

                                Does it require a lot of sanding before putting stain on?
                                Asked on 4/16/2012 by Jeannie from Davenport Iowa

                                1 answer

                                • Staff Reviewer

                                  A:

                                  Yes, this is an unfinished floor which requires site finishing by a professional after installation. For help finding finishers, go to WWW.NWFACP.ORG and click on sand and finisher and then type in a zip code or city/state.

                                  Answered on 5/14/2012 by cc-2
                              Displaying questions 1-10Previous | Next »

                              Do you have a question about this product? 




                              back to top
                               
                              loading...