Swatch Shadow
repbanner
 
1-800-HARDWOOD (1-800-427-3966)   |  Customer Care   |  En Español   
Log In   |   My Account   |  Shopping Cart   |  Order Status  
Virginia Mill Works 3/4"x5" Maple Acer Saccharum 1450 Solid

Virginia Mill Works  3/4" x 5" Summer Palace Maple Handscraped

Virginia Mill Works 3/4"x5" Maple Acer Saccharum 1450 Solid
Customer Rating


SKU: 10027658
Comparable Price $6.39/sq. ft.
Our Low Price $5.39/sq. ft.
Special Price $5.19/sq. ft.
Save up to $1.20/sq. ft. (19%)
Your Square Feet:


Check Measurement

19.59 sq. ft. per box
$101.68 each
Your Material Cost:


Add To Cart
Not sure it's the one? Visit your local store for a sample! Check your local store for complete sample availability
Add this product to your wish list   Add to Wish List

Virginia Mill Works
3/4" x 5" Summer Palace Maple Handscraped

This item was successfully added to your cart.
Continue Shopping

Checkout Now


Virginia Mill Works Co.- 3/4" x 5" Summer Palace Maple Prefinished Handscraped Solid Flooring- 30 Year Warranty

Colonial American homes were built with wooden floors that were sawn using basic hand-held tools. The hand-crafted workmanship that went into those floors can be found in Virginia Mill Works handscraped floors.
 
About Handscraped Flooring:
Handscraped or distressed hardwood floors have a natural worn appearance. They look like floors from the days when floors were finished by hand.
Please note this product is a nominal 3/4" thick, but due to its scraping process the thickness may be as thin as 5/8" in the scraped areas.

Steve Harvey

As Seen on TV:  Steve Harvey Show


Planning your new remodeling project?
Relax.
At Lumber Liquidators you will find the best resource on the web for everything about hardwood floors.
Call 1-800-HARDWOOD to speak to one of our sales associates.

Lumber Liquidators... More Floor, Less $$

  We caught up with real Lumber Liquidators' customers who volunteered to discuss their floor shopping, buying and installation experiences. In no way did these customers receive compensation for their kind words. (They're speaking straight from the heart.)

 

 


QUALITY GUARANTEE: This flooring is constructed and tested to meet or exceed industry standards for emissions.
Click here to learn more.

You may need:
Molding &
Trim
Add To Cart
Qty:  

Add To Cart
Summer Palace T-Molding   Stained Finish
Comparable Price $10.49/LFT
Our Low Price $6.99/LFT
Add To Cart
Qty:  

Add To Cart
Summer Palace Stair Nose   Stained Finish
Comparable Price $11.99/LFT
Our Low Price $7.99/LFT
Add To Cart
Qty:  

Add To Cart
Summer Palace Shoe Molding   Stained Finish
Comparable Price $3.79/LFT
Our Low Price $2.29/LFT
Add To Cart
Qty:  

Add To Cart
Summer Palace Reducer   Stained Finish
Comparable Price $11.49/LFT
Our Low Price $6.49/LFT
Add To Cart
Qty:  

Add To Cart
Summer Palace Threshold   Stained Finish
Comparable Price $10.49/LFT
Our Low Price $6.99/LFT


  • Brand:  Virginia Mill Works
  • FLOORING SKU:  10027658
  • Limited Warranty:  30 years
  • Trade Name:  Maple
  • Marketing Name:  Maple
  • Janka Rating:  1450
  • AC Rating:  N/A
  • Width:  5"
  • Thickness:  3/4"
  • Construction:  Solid
  • Installation Type:  Glue, Nail
  • Sq. Ft. Per Box:  19.59
  • Hardness Rating:  12% harder than Red Oak
  • Waste:  5%
  • Weight per box/unit:  56.63
  • Installation Details:  Installation Guide.pdf

  • Please click here to download Adobe Reader.

Do you have questions about this product?

AnswerBox - Get answers from Staff Experts and real customers by clicking "Ask a question"

or click here to ask our Customer Service Team

7 Questions | 7 Answers
Displaying questions 1-7
  • Q:

    Is this hardwood suitable for stairs?
    Asked on 11/25/2014 by Cassie from Bryans Road, MD

    1 answer

    • Staff Reviewer

      A:

      Yes this can be used to cover stairs, my only concern would be the possibility of premature wear on the high points in this hand scraped flooring..
      Thank you for your inquiry.

      Answered on 12/1/2014 by cc-2
  • Q:

    Can this product be installed in the basement concrete floor?
    Asked on 8/26/2014 by Hank from Colorado Springs, CO

    1 answer

    • Staff Reviewer

      A:

      This product is not recommended for below grade installation. Thank you for your inquiry

      Answered on 8/28/2014 by cc-3
  • Q:

    Will the handscraped wood floor ever need to be refinished or is the surface durable for a certain length of years?
    Can it be refinished?

    Is it suitable for in a kitchen?
    Asked on 6/17/2014 by Cher from glen ellyn, Il

    1 answer

    • Staff Reviewer

      A:

      Please call our Tech and Installation Dept. @ (800) 366-4204 for a detailed answer to your question. Thank you for your inquiry.

      Answered on 6/19/2014 by cc-3
  • Q:

    What is the best way to clean this flooring? Is it okay to use a Bisssell Steam and Sweep hard floor cleaner on it?
    Asked on 2/24/2014 by Chris from Rockford, MI

    1 answer

    • Staff Reviewer

      A:

      Our wood floors are manufactured for maximum durability, easy maintenance and finished with a high quality aluminum oxide water base urethane UV cured finish. This step protects the wood and helps keep the flooring looking beautiful longer. While highly durable, the finish is NOT considered indestructible. However, by observing a few precautions like setting up a regular cleaning routine and simple maintenance program to protect the finish, you can expect years of performance and beauty from your wood floor. All wood floors can show signs of wear over time. There are many factors that can affect the amount of wear. These include the size and lifestyle of your family and product location.
      The following cleaning principles are recommended for all of our products -Hardwood, Laminates, Corks, Bamboo and other Exotics. Outlined are examples of the reasonable and necessary maintenance to be performed; this is only intended to be a basic list;
      • Immediately after installation, be certain that the flooring is completely cleaned and dry as described below. If you must protect the flooring from traffic, use only “craft” paper, brown, red or white, this will allow the flooring to “breathe”. Do not fully cover the flooring. NEVER lay plastic of any kind or any other non-porous material over the flooring as this can trap moisture, harm the flooring or fade the finish.
      • Sweep or vacuum regularly, since built-up dirt, grit and sand can damage the surface of the wood. If using a vacuum, use a soft brush attachment -NOT A BEATER BAR ATTACHMENT. Be certain the wheels of the vacuum are clean and do not damage the finish. When using a broom be certain that bristles are soft. You can also use a dry mop.
      • Because of the myriad of cleaning products available and methods of each application, Lumber Liquidators cannot endorse or oversee the use of any Brand Name of floor cleaner. We do recommend cleaning products safe for urethane finishes such as our Bellawood floor cleaner.
      • The use of a changeable terry cloth type system to clean the floor is highly recommended; apply cleaning solution to the terry cloth not the floor.
      • NEVER use oil soaps, liquid, or paste wax products or other household cleaners that contain lemon oil, Tung oil, silicone, or ammonia on pre-finished flooring. The use of these products will harm the long-term performance and appearance of your floor and may affect future re-coating. (Damages caused by non-recommended cleaning products are not covered by warranties). NOTE: This also includes the use of vinegar and water solutions as water can damage wood. Vinegar is an acidic element that can have an oxidizing, caustic effect on the finish.
      • In an effort to clean hardwood floors, many have experimented with a variety of cleaners on the market and end up with a new problem. “How to remove the build-up of cleaning products revealing the original surface"? If this is the case with you, we recommend consulting with a professional cleaner local to your area because they can best see the details involved and make the most accurate recommendations. If you choose to remove the layers of build-up yourself, use cotton rags instead of a mop to control the amount of liquid used.
      • NEVER wet-mop, damp-mop, swab or flood your floor with water or any other product. Moisture can seep into the seams causing edge-cupping damage. Urethane floors do not require wet mopping. Natural floors are water resistant, not water proof. Remove all spills promptly using a soft, slightly damp cloth
      • STEAM CLEANERS OR WET-JET swiffer; Lumber Liquidators does not recommend "Water brooms" "Wet-Jet Swiffers or steamer type cleaners on laminates, corks or hardwood floors. Although steamers may work well cleaning OTHER types of hard surface flooring, the 130° to 240° heated steam vapor can ruin wood or urethane finish resulting in warped or cupped flooring. Water and wood do not mix well, especially steam. Use these products at your own risk.
      • Do place protective mats at entry doors to keep dirt, grit, sand and moisture from being track in from the outside.
      • Do use area rugs in heavily traveled areas and pivot points (e.g., stair landings, room entries, etc.), especially if you have a large family or indoor pets.
      • When using area rugs, use a rug pad with a felt, plant or PVC based backing. DO NOT use area rugs with a petroleum based rubber backing (typically black) as this can cause permanent chemical staining/etching of the floor finish.
      • Take reasonable precautions; use a dolly and protective sheets of plywood when moving heavy objects such as furniture and appliances.
      • Place protective pads beneath furniture legs and feet to reduce scratches and dents. Check and replace wore pads regularly.
      • Keep pet’s nails trimmed, and paws clean and free of dirt, gravel, grease, oil, and stains.
      • Scratches, dents and cupping are site related, not considered a manufactured defect.

      Thank you for your inquiry

      Answered on 3/14/2014 by cc-3
  • Q:

    What are the lengths of this stock?
    Asked on 2/18/2014 by Deepak from NJ

    1 answer

    • Staff Reviewer

      A:

      Minimum length - 9 inches
      Max - 60 inches
      Average - 30 inches
      Thank you for your inquiry

      Answered on 2/19/2014 by cc-3
  • Q:

    where is this hardwood flooring made? is it made in th u.s.?
    Asked on 9/29/2013 by shopping 4 floors from Arkansas

    1 answer

    • Staff Reviewer

      A:

      This is a product of China.
      Thank you for your interest in our flooring products.

      Answered on 9/30/2013 by cc-2
  • Q:

    Is this product scratch resistant SKU 10027658?
    Asked on 9/23/2013 by Rosa the Babe from Jamaica Plain, MA

    1 answer

    • Staff Reviewer

      A:

      Despite today's advanced technology, water spills, dirt and other abrasive substances can damage a wood floor's finish. Location, traffic patterns, how often the floor is vacuumed and cleaned, children and/or pets are all factors that influence wear and durability.
      Thank you for your inquiry.

      Answered on 9/24/2013 by cc-3
Displaying questions 1-7

Do you have a question about this product? 




back to top
 
loading...