Norge 4 in 1 Floor Stapler/Nailer

Customer Rating

SKU: 10025081 Comparable Price ~~$149.99/EA~~ Special Price $99.99/EA Save up to $50.00/EA (100%)
Quantity	Your Material Cost:
Add this product to your wish list

Norge
4 in 1 Floor Stapler/Nailer

This item was successfully added to your cart.

4 in 1 Floor Stapler/Nailer

The 4 in 1 Floor Stapler/Nailer is designed for use on Engineered and Laminate flooring.

Quick Highlights:
- Has the ability to fasten tongue and groove flooring and various finishing projects
- This nailer is ideal for 1/2 inch and below engineered or solid tongue and groove flooring
- Great for tacking down flooring while glue sets
- Quickly converts to a straight 18-gauge brad nailer, which can be used for finish molding to complete the flooring project
- Equipped with a comfort grip handle, 360 degree adjustable exhaust, anodized aluminum cylinder, anodized aluminum magazine, air filter/anti-dust cap, tool-free depth adjustment and reload indicator
- Features an oil-free design that includes oil (which is not necessary, but recommended)

Initial content

REVIEW SNAPSHOT®

by PowerReviews

3.8

(based on 10 reviews)

100%

of respondents would recommend this to a friend.

Pros

Cons

Best Uses

- Was this a gift?:
- No (6)

Reviewed by 10 customers

Sort by

Displaying reviews 1-10

5/13/2013

5.0

very versatile

By Jdog

from Windsor, ON

Pros

Cons

Best Uses

purchased to staple down engineered hardwood floor

4/28/2013

1.0

Adjustment depth not as stated on intern

By Rich

from Bolingbrook, IL

I bought this tool to install 5/16" hardwood. The internet stated tool would adjust to 1/2" and below. Tool would not adjust down to 5/16" as needed. Also be aware that tools are not returnable , I was never told this, Since I ordered to be picked up in store I took it back to store and they allowed the return as I had picked it up just an before.

4/1/2013

(1 of 1 customers found this review helpful)

5.0

great tool

By Do-right Dickson

from Iron Station, NC

Pros

Durable
Great Instructions
Low Cost

Cons

Takes a little practice

Best Uses

Any Wood Finishing
Engineered Wood
Finish Moulding
Thin Hardwood

Great product for price. If using to install flooring I recommend knee pads cause all of the work will be done crawling. So far I have ran about 3000 staples through it and it has only jammed once. The staple jam was my fault as a result from shooting another staple. Takes a little practice but easy to learn and great instructions. Usually value products have little to no instructions. I like that it comes with the air fitting, tools and air tool oil.

Recommended:
1" staples for exotic hardwoods

Similar:
bostich finish nailer, bostich finish stapler

4/1/2013

4.0

Worked Great-No Problems

By Sore Knees

from New York

Pros

Cons

Best Uses

Half Inch Engineered Hard

Stapler worked great with 1-3/8 staples in hardwood/plywood sub floor,saved a ton of time.
The multi-tool is a must for cutting out staple heads that dont seat all the way in the tounge.Dont know how it will last in the long haul but it worked great for the 400 sq ft I installed!

Recommended:
oscillating multi-tool w/serrated knife blade

3/30/2013

3.0

Good Tool for the Price

By FCE, Flooring Division

from Gulfport, MS

Pros

Rarely jams
Reliable

Cons

Plastic Head
Tricky To Adjust Depth

Best Uses

Engeneered Wood Plank

This is a good tool, for the price. It doesn't jam often. The only drawbacks that I found is the fact that it's hard to get the depth adjustment just right and the safety was quick to push through the tongue of the plank. I had to wire the safety back to make good time with it.

3/18/2013

4.0

Great Nailer

By Mr. Marko

from Troy, MI

Pros

Light Fast And Reliable

Cons

Best Uses

Over all good nailer/stapler. Aside from having to change out the air hose fitting I had no issues.

3/4/2013

(1 of 1 customers found this review helpful)

4.0

Product worked well

By Champ

from Trenton, Michigan

Pros

Cons

Best Uses

Good Value.

2/23/2013

4.0

works well

By Flyman

from Albany, NY

Pros

Good Value
Makes Installation Easy
Well Made
Works as designed

Cons

none

Best Uses

A must for installing 3/8 or 1/2 engineered wood flooring. Time will tell on the longevity.

12/20/2012

(1 of 1 customers found this review helpful)

4.0

Sweet Tool

By Rndy

from Northern Michigan

Pros

Compact
Easy to use
Good design

Cons

none

Best Uses

Well designed product that is also easy to use.

11/27/2012

(1 of 2 customers found this review helpful)

4.0

worked great! Good buy

By The wife

from DeSoto, MO

Pros

Easy And Speed Up Job

Cons

Best Uses

Really helped speed up the job!

Displaying reviews 1-10

Do you have questions about this product?

AnswerBox - Get answers from Staff Experts and real customers by clicking "Ask a question"

or click here to ask our Customer Service Team

18 Questions | 19 Answers

Displaying questions 1-10Previous | Next »

Q:
Can this one 4-in-one nailer/stapler be used for 3/4" hardwood floor? Thanks.
Asked on 4/28/2013 by Tony
Know the answer? Answer this question
1 answer
- A:
  Unfortunately not, I would recommend our 18 ga cleat nailer for this 3/4"product.
  18ga. Floor Nailer SKU: 10024938
  You can find complete installation instructions on the product page by clicking on the specs tab and then clicking on - Installation Guide.pdf Thank you for writing in
  Answered on 5/3/2013 by cc-2
Q:
Can this be used for finished hardwood at the begining of the laying of wood and at the end where a staple gun using a mallet can not reach because of the wall. We have been using drills and hammer and nails to nail into the wood and would like something stronger and that will complete the task faster to do this work.
Asked on 4/15/2013 by Taiwo from Rockvile, MD
Know the answer? Answer this question
1 answer
- CUSTOMER CARE
  
  A:
  Not recommended for that use.
  
  When nailing your first and last rows where a nailer won't fit because of the wall or cabinets, drill and hand nail as many boards as you can through the tongue at a 45 degree angle. When you don't have room for that pre-drill with 3mm bit (3/32") to prevent finish damage/cracking and face nail with 5d-8d galvanized, screw shank, ring shank or regular finish nails. Countersink with a nail punch and fill holes with a matching filler.
  Answered on 4/20/2013 by Tech & Install
Q:
Can I use this 4 in 1 to install 3/8 bamboo flooring?
Asked on 4/10/2013 by Craig from Detroit MI
Know the answer? Answer this question
1 answer
- A:
  Not recommended for solid bamboo products. Our Norge 18ga. will work on this flooring or an equivalent nailer that shoots 1/8 gauge cleats
  Answered on 4/18/2013 by cc-2
Q:
Can this be used to install 1/2" engineered hardwood, Birch Virginia Mill Works flooring(5' wide x 1/2" thick)? Will this gun work with 1 1/2" 18 gage staples? Thank you.
Asked on 3/27/2013 by KCC455 from Fort Wayne, IN
Know the answer? Answer this question
1 answer
- CUSTOMER CARE
  
  A:
  Yes.
  Answered on 3/28/2013 by Tech & Install
Q:
Will Norge 4 in 1 floor stapler/nailer work for installing 9/16" engineered hickory flooring? If so what size staple should I use?
Asked on 3/22/2013 by Andy from Lakeville, MN
Know the answer? Answer this question
1 answer
- CUSTOMER CARE
  
  A:
  No, the 4 in 1 is adjustable for 3/8", 5/8" and 1/2" thickness and not all types of flooring. Search for Fastener Recommendations" in the manufacturer installation instructions of your flooring.
  
  A good resources is our flooring 101 section - http://www.lumberliquidators.com/ll/flooring/Flooring101
  Answered on 3/24/2013 by Tech & Install
Q:
Hi just wondering if this 4 in 1 stapler/nailer supports both 18 gauge cleats and brads or just brads? Also can either be used on 3/8" strand bamboo (the hard kind)and is one better than the other? How about using staples on the same flooring? Will this cause the bamboo to split? Thank you!!
Asked on 3/21/2013 by Randy from Duncan, SC
Know the answer? Answer this question
1 answer
- CUSTOMER CARE
  
  A:
  No. Our Norge 18ga. will work on this flooring or an equivalent nailer that shoots 1/8 gauge cleats.
  Answered on 3/24/2013 by Tech & Install
Q:
I'm installing Amendoim 5/16" solid hardwood above grade onto 3/4" plywood. Which staple size is recommended. The instructions on the packaging give no clue as to the size of recommended staple.
Asked on 3/14/2013 by Geet from Columbia, S.C.
Know the answer? Answer this question
1 answer
- CUSTOMER CARE
  
  A:
  Please See FASTENER SELECTION here - www.lumberliquidators.com/assets/images/installation/bellawood.pdf
  Answered on 3/20/2013 by Tech & Install
Q:
Do I need to use this to install my click lock laminate floor ? One person said I did and another person said I didn't -I need pro advice
Asked on 3/5/2013 by Celest from Oden,Arkansas
Know the answer? Answer this question
1 answer
- A:
  No, not needed for a click together floor product.
  Answered on 3/11/2013 by cc-2
Q:
can this be converted to just shoot 1/4 crown staples
Asked on 2/27/2013 by britt
Know the answer? Answer this question
1 answer
- A:
  Yes it can.
  Thank you for writing in.
  Answered on 3/6/2013 by cc-2
Q:
what fastener nail down for 5/8 x 3 3/4 bamboo #10007172
Asked on 2/27/2013 by john from ct.
Know the answer? Answer this question
1 answer
- A:
  18ga. Floor Nailer SKU: 10024938 As Low As $279.99/EA
  You can find complete installation instructions on the product page by clicking on the specs tab and then clicking on - Installation Guide.pdf
  Thank you for writing in.
  Answered on 3/6/2013 by c

Displaying questions 1-10Previous | Next »

Do you have a question about this product?

* indicates required fields
Your Info »	* Your Name:
Your Info »	* Email Address:
Your Friend's Info »	* Friend's Name:
Your Friend's Info »	* Email Address:
Your Message »	Your Message:
	No need to include a link to this page, we'll do that.
		Close Window