Print This Page
Customers most agreed on the following attributes:
from rockwall tx on 9/22/2011
Comments about Stair Nosing 3/4 X 3-1/4:
best for landings
Comments about Stair Nosing 3/4 X 3-1/4:
I bought these for a contractor to install. He matched stains with our prefinished hardwood and it works great. I do recommend using a hardener with the stain to prevent wear and tear.
from Chaska, MN on 9/20/2010
Comments about Stair Nosing 3/4 X 3-1/4:
I used the bull nose transitioning from our dining room going downstairs. looks great.
from Ligonier, PA on 8/24/2010
Comments about Stair Nosing 3/4 X 3-1/4:
[...] find a supplier that makes stair nosing 11 1/2" in total width and reverse the groove to a tounge!
from harahan, louisiana on 7/28/2010
Comments about Stair Nosing 3/4 X 3-1/4:
the wood was diferent sizes and did not fit toghather. [...]
from Fairfax, Va on 7/27/2010
Comments about Stair Nosing 3/4 X 3-1/4:
na, did not install myself
from montgomery, al on 6/27/2010
Comments about Stair Nosing 3/4 X 3-1/4:
landing on stairway
from Albany, NY on 6/22/2010
Comments about Stair Nosing 3/4 X 3-1/4:
Easy to work with and milling is unform.
from Monument on 6/8/2010
Comments about Stair Nosing 3/4 X 3-1/4:
be careful when going from carpet to bullnose not to trip going up the stairs.
from Folsom, CA on 5/5/2010
Comments about Stair Nosing 3/4 X 3-1/4:
Lumber liquidators is the one place that I can dependably find this product.
[2 of 2 customers found this review helpful]
from Mascoutah, IL on 3/26/2010
Comments about Stair Nosing 3/4 X 3-1/4:
Unfinished Red oak stair nosing matched the red oak flooring perfect and was easy to install. Would highly recommend this product over fabricating.
Finished with Golden Oak Stain and Stain Poly
from Tucson, az on 3/4/2010
Comments about Stair Nosing 3/4 X 3-1/4:
In a world of engineered and plastic floors, it was difficult to find the old standard 3/4" bullnose in the lengths I needed. L.L. had them and the price was right.
from Bella Vista, Arkansas on 3/4/2010
Comments about Stair Nosing 3/4 X 3-1/4:
We also bought stair treads, risers and 3/4 x 2.5 oak flooring for a stair landing.
from Springfield, MO on 3/2/2010
Comments about Stair Nosing 3/4 X 3-1/4:
Gives the top landing step a finished look that blends with the red oak treads.
from Fort Wayne, IN on 2/19/2010
Comments about Stair Nosing 3/4 X 3-1/4:
works and looks great
from San Antonio, Texas on 1/16/2010
Comments about Stair Nosing 3/4 X 3-1/4:
My stir treads are beautiful and highlight my home. I just wish I would have known about Lumber Liquidators earlier. [...] Thank you for helping to make life a lot more beautiful!
from Spring City, Tennessee on 11/18/2009
Comments about Stair Nosing 3/4 X 3-1/4:
Quality of the wood was Excellent - Beautiful grain and straight as an arrow...!
from Olney, MD on 11/18/2009
Comments about Stair Nosing 3/4 X 3-1/4:
I originally had carpet on my stairs. Recently, I hired a contractor to install the stair nosing and hardwood flooring on the landings. To my surprise, the outcome was better than I could imagine. The stairs look great and I am happy with the new look.
from phx az on 9/12/2009
Comments about Stair Nosing 3/4 X 3-1/4:
good product, quality material
from Philadelphia PA on 8/28/2009
Comments about Stair Nosing 3/4 X 3-1/4:
We took out our old carpet and redid our stairs with hardwood and it looks great! It was easy and quick to do!
from Cleveland, Ohio on 11/26/2008
Comments about Stair Nosing 3/4 X 3-1/4:
Product was easy to install and cut to size. Sanded and stained to a matching finish with the rest of the floor in my 1920's colonial.
from Ft Worth TX on 9/10/2008
Comments about Stair Nosing 3/4 X 3-1/4:
Purchase was easy and the price was right!
from Spokane, WA on 7/9/2008
Comments about Stair Nosing 3/4 X 3-1/4:
Adds a nice finish to our hard wood floor and stair case.
[1 of 1 customers found this review helpful]
from Las Vegas , NV on 6/2/2008
Comments about Stair Nosing 3/4 X 3-1/4:
Your product was very good but I had specific ordering instructions on sizes that were needed for stairs ( shouldn't piece stairs) and they were not met so my job came up short and now I must wait for the next shipment ( which is putting my job behind schedule). I have been told it will only take a few weeks, I hope that is accurate along with the remaining sizes I need !!
from Lusby, MD on 5/22/2008
Comments about Stair Nosing 3/4 X 3-1/4:
My husband installed the hardwood floor without really any trouble. The Red Oak flooring is beautiful and the cherry kitchen cabinets accentuate the "pink" in the floor. Look's great!
from Saint Charles, Missouri on 5/16/2008
Comments about Stair Nosing 3/4 X 3-1/4:
The Brazilian mesquite added class and value to my living and family rooms.
from Minneapolis, MN on 4/23/2008
Comments about Stair Nosing 3/4 X 3-1/4:
Product looked good and was finished well. One of the boards had a little too much waste. Biggest complaint is that special ordered product cannot be ordered in lengths. I wanted a ten foot section but was told that they were at the mercy of what was sent--so I got 3 4' sections instead. One long run would look better than having the joints.
from Chester, VA on 3/10/2008
Comments about Stair Nosing 3/4 X 3-1/4:
Used this for our landing on a staircase. Perfect.
[2 of 2 customers found this review helpful]
from Gooding, Idaho on 2/16/2008
Comments about Stair Nosing 3/4 X 3-1/4:
A nice addition to any home stairway. Easy to instal and blends well with the pine wall covering I installed earlier.
Before
after
Tags: Picture of Product, Made with Product
from El Paso, Texas on 2/15/2008
Comments about Stair Nosing 3/4 X 3-1/4:
Solid Oak, Beautiful, Just cut,stain, and nail in place.