Comments about Schön Quick Clic Engineered 7/16" x 4" Red Oak Flooring:

It is helpful to have a table saw and miter saw

Comments about Schön Quick Clic Engineered 7/16" x 4" Red Oak Flooring:

The floor looks great. It was easy to install and seems durable. My only complaint is how the knots were filled in this wood. The knots were filled with a filler and on some pieces not completely filled leaving small holes in those areas. Other than that, the floor is excellent. You do not have to have much experience with floors to install it. I would recommend this item to anyone interested in floating floors.

Comments about Schön Quick Clic Engineered 7/16" x 4" Red Oak Flooring:

I've installed 3 different types of laminate flooring and this was by far the easiest. The only thing I didn't like was the large amount of smaller strips that I got. I expected more long lenghts. I will say that I had very little waste which may contribute to the smaller pieces. Floor looks great. Layed a 12' x 14' bedroom in about 6 hours.

Comments about Schön Quick Clic Engineered 7/16" x 4" Red Oak Flooring:

The product is superior to that sold in [...] even though it more expensive ([$] vs [$]). I think the price is well worth it. The installation seem easy even though my friend did it for me. Only complaint is the cost to buy the edging wood (tansition between the living room and utility room) which is bit too high.

Comments about Schön Quick Clic Engineered 7/16" x 4" Red Oak Flooring:

I could not use 3/4" solid hardwood because I have particle board sub flooring. I chose this flooring because it looks and feels exactly like solid hardwood. The installers said it was very easy to install. I love the natural look, especially with the knots. I've received many compliments on it and will probably have it installed in other areas of my home as well.

Comments about Schön Quick Clic Engineered 7/16" x 4" Red Oak Flooring:

Nice interlocking system. Can be built from either direction. #2 Oak not only contains Knots but also edge defects, most of which can be cut off with carful planning to minimize waste. Get the #1 product if you want an easier install. The "T" moulding for joints leaves a floor that has bumps (DUH).I made my own tougue and groove thresholds/joints by using a saw blade kerf width (1/8th) to cut the groove in abuting pieces and 1/8th ply stock to insert a tongue with glue. Don't let people with steel spiked heels on this floor!

Comments about Schön Quick Clic Engineered 7/16" x 4" Red Oak Flooring:

the test will be how it wears in time

Comments about Schön Quick Clic Engineered 7/16" x 4" Red Oak Flooring:

The subfloor was particle board so I could not use solid hardwood without replacing it. Used on stairway landing , hall and office. Did not have a stair nosing and the laminate one that was recommended looked really cheap. I bought a solid oak stair nosing and routed it to fit. Not an easy task and did not come out perfect but looks a lot better than the laminate.
Love the look of the floor and the finish. I like the natural wood look including knots. Very little waste.
Not difficult to install but not as easy as it looks. I am a woman and retired (meaning I am not that strong nor that young) but was able to install it all by myself. I plan on continuing the floor into two bedrooms.

Comments about Schön Quick Clic Engineered 7/16" x 4" Red Oak Flooring:

The wood is beautiful. It goes down easily and the variation to the grain adds a lot of character to the rooms.

Comments about Schön Quick Clic Engineered 7/16" x 4" Red Oak Flooring:

I wanted to get rid of the carpet in my bedroom due to allergies. I had a couple friends come over and we finished the entire room w/ hallway and closets in a day. These are great and my room looks gorgeous!

Comments about Schön Quick Clic Engineered 7/16" x 4" Red Oak Flooring:

I used the material for the ground floor install of the living room, kitchen and dinning area. the one thing that moved our choice was the install as we picked the click flooring. We had planned on getting Solid wood and doing a glue down, but to move things along faster we went to Click flooring. It was an increase in cost not budgeted for but we still went ahead and did it.