To calculate lineal feet of trim, (e.g. base, quarter round) simply measure each wall in the room and add up the lineal feet. For ease of installation use whole pieces where ever possible. Allow extra for cutting each corner and splicing pieces together.

rooms combined to display linear feet calculations

To determine the square footage of a square or rectangular room, measure the length and width of the room in feet or inches and enter the values in Area 1 of the calculator below.  For irregularly shaped areas or multiple rooms, it is helpful to draw a diagram and divide the room up into sections. Treat each section as a separate area, as in this illustration. Input the measurements of each area below to see the total SQFT needed.

rooms combined to display sqft calculations

 
Area Length
Area Width
feet
inches
feet
inches
Area 1
Area 2
Area 3
Area 4

SKU: 10050843

DEWALT 
8-1/4" Compact Table Saw

$99 smart rate delivery for orders up to 500 sq ft!
Learn More

DeWalt 8-1/4" Compact Table Saw

Maximized for accuracy and capacity, this 8-1/4 in. Table Saw includes on-board storage for the blade guard assembly, non-through cut riving knife, anti-kickback pawls, blade-change wrenches, miter gauge, and push stick. The powerful 15 Amp, 5800 rpm motor allows users to complete a majority of applications. The rack & pinion fence allows for fast, easy adjustments and provides the capacity to rip 4x8 sheet goods.

Highlights:
- Compact size for easy transportation and storage
- Rack & pinion telescoping fence rails make fence adjustments fast, smooth, and accurate
- 24.5" of rip capacity for ripping 4x8 plywood or OSB sheets
- Power-loss reset prevents accidental restarts following a power disruption when the tool is left in the on position
- Blade brake
- On-board storage for guard, fence, wrenches, and miter gauge
- Metal roll cage base for jobsite durability
- Site-Pro Modular Guarding System allows for tool-free adjustments of the guarding

Specifications:
- 15 AMPS
- Arbor Size 5/8"
- Blade Diameter 8-1/4"
- Depth of cut at 45 1-3/4"
- Depth of cut at 90 2-9/16"
- Dust port diameter 2.5" for wood cutting true
- Max rip to left of blade 12 "
- Max rip to right of blade 24.5"
- No load speed 5,800 RPM
- Tool height 13"
- Tool length 22.75"
- Tool weight 46 LBS

Includes:
- (1) DWE7485 8-1/4 in. Table Saw
- (1) Fence
- (1) Anti-Kickback Pawls
- (1) Miter Gauge
- (1) Push Stick
- (1) 8-1/4 in. Blade
- (1) Non-Through Cut Riving Knife
- (2) Blade-Change Wrenches
- (1) Modular Guard System