To calculate lineal feet of trim, (e.g. base, quarter round) simply measure each wall in the room and add up the lineal feet. For ease of installation use whole pieces where ever possible. Allow extra for cutting each corner and splicing pieces together.

rooms combined to display linear feet calculations

To determine the square footage of a square or rectangular room, measure the length and width of the room in feet or inches and enter the values in Area 1 of the calculator below.  For irregularly shaped areas or multiple rooms, it is helpful to draw a diagram and divide the room up into sections. Treat each section as a separate area, as in this illustration. Input the measurements of each area below to see the total SQFT needed.

rooms combined to display sqft calculations

Area Length
Area Width
Area 1
Area 2
Area 3
Area 4

SKU: 10043002

10" Compact Table Saw with Site-Pro Modular Guarding System

$99 flat rate shipping for orders up to 500 sq ft!
Learn More

DEWALT DWE7480 10" Compact Table Saw with Site-Pro Modular Guarding System

The DWE7480 10" Compact Job Site Table Saw with Site-Pro Modular Guarding System has a 15 Amp motor and 24" rip capacity to allow cutting of large and hardwood materials. Features tool-free guarding component adjustments and fast, accurate fence adjustments. Compact and lightweight with a metal roll cage for jobsite durability.

- Rack and pinion telescoping fence rails make fence adjustments fast, smooth and accurate
- 24" of rip capacity, easily cuts a variety of larger shelving and trim materials
- Site-Pro Modular Guarding System allows for tool free adjustments of the guarding components appropriate for each application
- 15 amp 4800 rpm motor quickly rips through hardwoods with ease
- Onboard storage provides easy access to the Site-Pro Guarding components and push stick when not in use
- Metal roll cage base offers greater durability than plastic bases
- Blade can be adjusted 0 - 45 degrees for bevel applications
- Weighing only 48 lbs, the DWE7480 can easily be moved on and off the job
- Adjustable rear feet designed to level the saw on uneven work surfaces
- Dust port allows for 2-1/2" vacuum hook up and minimizes clean up
- 24T carbide blade enhances cut quality and prolongs blade life
- Table coating reduces friction for smoother cutting

- Amps: 15.0 Amps
- Arbor Size: 5/8 in
- Blade Diameter: 10"
- Depth of Cut at 45: 2-1/4 in
- Depth of Cut at 90: 3-1/8 in
- Dust Port Diameter: 2-1/2 in
- Max Rip To Left Of Blade: 12 in
- Max Rip To Right Of Blade: 24 in
- No Load Speed: 4800 rpm
- Tool Weight: 48 lbs