To calculate lineal feet of trim, (e.g. base, quarter round) simply measure each wall in the room and add up the lineal feet. For ease of installation use whole pieces where ever possible. Allow extra for cutting each corner and splicing pieces together.

rooms combined to display linear feet calculations

To determine the square footage of a square or rectangular room, measure the length and width of the room in feet or inches and enter the values in Area 1 of the calculator below.  For irregularly shaped areas or multiple rooms, it is helpful to draw a diagram and divide the room up into sections. Treat each section as a separate area, as in this illustration. Input the measurements of each area below to see the total SQFT needed.

rooms combined to display sqft calculations

 
Area Length
Area Width
feet
inches
feet
inches
Area 1
Area 2
Area 3
Area 4

SKU: 10029639

Norge 
15-1/2ga. 2-in-1 Floor Nailer


15-1/2ga. 2-in-1 Floor Nailer

Be a pro when it comes to installing your hardwood floors with the 2-in1 Floor Nailer/Stapler. It can shoot both staples and nails without any extra conversion kit. The lightweight nailer has an extra-long handle to reduce back strain and to promote a quicker installation pace.

This flooring nailer ships with a manual which details upkeep and daily use for the item. It is designed for use with 16 gauge 1-1/2" and 2" floor cleats and 15.5ga. 3/4" to 2" floor staples. Features a 1-piece drive pin for long lasting performance. It ships with 1/2" and 3/4" shoes and a rubber mallet. The magazine on the nail gun is easy to use and top loading. 

Not for use on bamboo floors.

***Online purchases limited to 2 per customer.*** 

Quick Highlights:

Oil-lubed design promotes a long-lasting life 

- Features a wide base with protective bumpers for a sure set and to help protect flooring    

- Uses cleat nails 1-1/2" long to 2" long or floor staples 1-1/2" long to 2" long  

- 80 staple, 100 cleat magazine capacity, top loading     

- Can install wood flooring with thickness from 1/2" up to 3/4"   

- Comes with Fiberglass Handle Hammer, Goggles, Hex Wrenches, Air Tool Oil and Spacers  

Specs:

- Load Capacity: (S) 80pcs (L)100

- Staple Length Range: 1-1/2"-2"   

- L-shaped Nail Length Range: 1-1/2"-2" 

- Staple Size: 15-1/2 Gauge

- L-shaped Nail Size: 15 Gauge

- Air Inlet: 1/4" NPT  Swivel

- Air Consumption: 0.2 CFM at 90PSI   

- Operating Air Pressure: 60-100PSI

- Dimension: 17-7/8"L x 3-1/16"W x 22-5/8"H 

- Shipping Weight: 17.06 lbs.