Lumber Liquidators logo
Flooring 101 Home Flooring Adhesive Bond Testing Recommendation Mapei Adhesive Recommendations for LL Wood

Mapei Adhesive Recommendations for LL Wood



March 26, 2008

Mr. Robert Middleton
Lumber Liquidators: Technical Services 
3000 John Deere Road 
Toano, VA 23168

RE:

VR07UR04U
Lumber Liquidators
Walnut, Teak, Golden Teak and Mesquite bond recommendation.

Robert,

This is regarding the evaluation of the samples of wood flooring submitted for evaluation. The objective was to determine the best adhesive recommendation for the samples considered to be difficult to bond. For this test, Walnut, Teak, and Mesquite wood flooring were submitted in strip format (3/8" x 3"), Golden Teak was in a plank format (3/4" x 4 3/4").

The samples of each wood variety were evaluated for tensile bond strength at 7, 14, 21, and 28 days after being installed with Ultrabond 980 and Ultrabond 990. The results of this bond evaluation indicated that both the Ultrabond 980 and 990 bonded to each wood product. The average improvement in bond strength between the Ultrabond 980 and Ultrabond 990 was judged to be significant and would warrant its use for these more demanding wood types.

Based on this evaluation MAPEI can recommend the Ultrabond 990 for the installation of the wood products as referenced above. The trowel that would be recommended for these applications should achieve a minimum 85% transfer and would include 1/4" x 1/4" x 1/4" square notch or 1/4" x 3 / 16 " 1/2" trowel as shown on the technical data sheet. Installation should proceed in accordance with industry standards and MAPEI's most current written recommendations.

Sincerely,

Mike Daniels
Sr. Applications Specialist 
MAPEI Corporation 
HEADQUARTERS OF THE AMERICAS

1144 E. Newport Center Drive
Deerfield Beach, FL 33442 
Tel. 954.246.8888 
Fax 954.246.8805


Flooring 101 Home Flooring Adhesive Bond Testing Recommendation Mapei Adhesive Recommendations for LL Wood